Lesson plan

Pre-ignition

Pre-ignition (or preignition) in a spark-ignition engine is premature ignition of the air/fuel mixture in the cylinder, before the spark plug fires. Pre-ignition is initiated by an ignition source other than the spark, such as hot spots in the combustion chamber, a spark plug that runs too hot for the application, or carbonaceous deposits in the combustion chamber heated to incandescence by previous combustion events. It is technically a different phenomenon from engine knocking, which refers to uneven combustion caused by displaced or multiple ignition fronts, though knocking often follows pre-ignition. The phenomenon is also referred to as 'after-run' or 'run-on', or sometimes dieseling, when it causes the engine to continue running even after the ignition is shut off. This effect is more readily achieved on carbureted gasoline engines, because the fuel supply to the carburetor is typically regulated by a passive mechanical float valve and fuel delivery can feasibly continue until fuel line pressure has been relieved, provided the fuel can be somehow drawn past the throttle plate. The occurrence is rare in modern engines with throttle-body or electronic fuel injection, because the injectors will not be permitted to continue delivering fuel after electric power to the engine is shut off, and any occurrence may indicate the presence of a leaking (failed) injector.…

Back to article

Article summary

Pre-ignition (or preignition) in a spark-ignition engine is premature ignition of the air/fuel mixture in the cylinder, before the spark plug fires. Pre-ignition is initiated by an ignition source other than the spark, such as hot spots in the combustion chamber, a spark plug that runs too hot for the application, or carbonaceous deposits in the combustion chamber heated to incandescence by previous combustion events. It is technically a different phenomenon from engine knocking, which refers to uneven combustion caused by displaced or multiple ignition fronts, though knocking often follows pre-ignition. The phenomenon is also referred to as 'after-run' or 'run-on', or sometimes dieseling, when it causes the engine to continue running even after the ignition is shut off. This effect is more readily achieved on carbureted gasoline engines, because the fuel supply to the carburetor is typically regulated by a passive mechanical float valve and fuel delivery can feasibly continue until fuel line pressure has been relieved, provided the fuel can be somehow drawn past the throttle plate. The occurrence is rare in modern engines with throttle-body or electronic fuel injection, because the injectors will not be permitted to continue delivering fuel after electric power to the engine is shut off, and any occurrence may indicate the presence of a leaking (failed) injector.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.