Premixed flame

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

depend on oxygen supply. On the left a rich fuel mixture with no premixed oxygen produces a yellow sooty diffusion flame, and on the right a lean fully oxygen premixed flame produces no soot and the flame color is produced by molecular radical band emission. A premixed flame is a flame formed under certain conditions during the combustion of a premixed charge (also called pre-mixture) of fuel and oxidiser. Since the fuel and oxidiser—the key chemical reactants of combustion—are available throughout a homogeneous stoichiometric premixed charge, the combustion process once initiated sustains itself by way of its own heat release. The majority of the chemical transformation in such a combustion process occurs primarily in a thin interfacial region which separates the unburned and the burned gases. The premixed flame interface propagates through the mixture until the entire charge is depleted. The propagation speed of a premixed flame is known as the flame speed (or burning velocity) which depends on the convection-diffusion-reaction balance within the flame, i.e. on its inner chemical structure. The premixed flame is characterised as laminar or turbulent depending on the velocity distribution in the unburned pre-mixture (which provides the medium of propagation for the flame).

depend on oxygen supply. On the left a rich fuel mixture with no premixed oxygen produces a yellow sooty diffusion flame, and on the right a lean fully oxygen premixed flame produces no soot and the flame color is produced by molecular radical band emission.]] A premixed flame is a flame formed under certain conditions during the combustion of a premixed charge (also called pre-mixture) of fuel and oxidiser. Since the fuel and oxidiser—the key chemical reactants of combustion—are available throughout a homogeneous stoichiometric premixed charge, the combustion process once initiated sustains itself by way of its own heat release. The majority of the chemical transformation in such a combustion process occurs primarily in a thin interfacial region which separates the unburned and the burned gases. The premixed flame interface propagates through the mixture until the entire charge is depleted. The propagation speed of a premixed flame is known as the flame speed (or burning velocity) which depends on the convection-diffusion-reaction balance within the flame, i.e. on its inner chemical structure. The premixed flame is characterised as laminar or turbulent depending on the velocity distribution in the unburned pre-mixture (which provides the medium of propagation for the flame). \omega = B \left(\frac{\rho Y_F}{W_{F}}\right)^m \left(\frac{\rho Y_{O_2}}{W_{O_2}}\right)^n e^{-E_a/RT}, where B is the pre-exponential factor, \rho is the density, Y_F is the fuel mass fraction, Y_{O_2} is the oxidizer mass fraction, E_a is the activation energy, R is the universal gas constant, T is the temperature, W_F\ \& \ W_{O_2} are the molecular weights of fuel and oxidizer, respectively and m\ \& \ n are the reaction orders. Let the unburnt conditions far ahead of the flame be denoted with subscript u and similarly, the burnt gas conditions by b , then we can define an equivalence ratio \phi for the unburnt mixture as \phi = \frac{\nu_{O_2} W_{O_2}}{\nu_F W_F}\frac{Y_{F,u}}{Y_{O_2,u}} . Then the planar laminar burning velocity for fuel-rich mixture ( \phi>1 ) is given by S_L=\left\{\frac{2 B\lambda_b \rho_b^{m+n} \nu_F^m Y_{O_2,u}^{m+n-1} G(n,m,a)}{ c_{p,b} \rho_u^2 \nu_{O_2} W_{O_2}^{m+n-1} \beta^{m+n+1} \mathrm{Le}_{O_2}^{-n} \mathrm{Le}_F^{-m}}\right\}^{1/2} e^{-E_a/2RT_b} + O(\beta^{-1}), where G(n,m,a) = \int_0^\infty y^n (y+a)^m\ dy and a=\beta(\phi-1)/\mathrm{Le}_F . Here \lambda is the thermal conductivity, c_p is the specific heat at constant pressure and \mathrm{Le} is the Lewis number. Similarly one can write the formula for lean \phi mixtures. This result is first obtained by T. Mitani in 1980. Second order correction to this formula with more complicated transport properties were derived by Forman A. Williams and co-workers in the 80s. Variations in local propagation speed of a laminar flame arise due to what is called flame stretch. Flame stretch can happen due to the straining by outer flow velocity field or the curvature of flame; the difference in the propagation speed from the corresponding laminar speed is a function of these effects and may be written as: S_T=S_L + \mathcal{M}_c \delta_L (S_L-\mathbf{v}\cdot\mathbf{n}) \nabla \cdot \mathbf{n} - \mathcal{M}_t \delta_L \nabla_t\cdot \mathbf{v}_t where \mathbf{n} is the unit normal to the flame surface (pointing towards the burnt gas side), \mathbf{v} is the flow velocity field evaluated at the flame surface and \nabla_t\cdot \mathbf{v}_t is the surface divergence of the tangential velocity \mathbf{v}_t=(\mathbf{I}-\mathbf{n}\otimes\mathbf{n})\mathbf{v} ; with flow being incompressible outside the flame, \nabla_t\cdot \mathbf{v}_t=-\mathbf{n}\otimes\mathbf{n}:\nabla\mathbf{v}-(\mathbf{v}\cdot\mathbf{n})\nabla\cdot\mathbf{n} . Moreover, \mathcal{M}_c and \mathcal{M}_t are the two Markstein numbers, associated with the curvature and tangential straining. \frac{\partial G}{\partial t} + \mathbf{v} \cdot \nabla G = S_T |\nabla G| , which is defined such that the level-sets of G represent the various interfaces within the premixed flame propagating with a local velocity S_T . This, however, is typically not the case as the propagation speed of the interface (with resect to unburned mixture) varies from point to point due to the aerodynamic stretch induced due to gradients in the velocity field. Under contrasting conditions, however, the inner structure of the premixed flame may be entirely disrupted causing the flame to extinguish either locally (known as local extinction) or globally (known as global extinction or blow-off). Such opposing cases govern the operation of practical combustion devices such as spark-ignition engines as well as aero-engine afterburners. The prediction of the extent to which the inner structure of flame is affected in turbulent flow is a topic of extensive research.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376082489 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001376082489 · captured 1790027104.0 · version history

Cite this page as: encyclopegia.org, “Premixed flame”, snapshot enwiki-001376082489. https://encyclopegia.org/a/premixed-flame

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.