Pressure altitude

Given an atmospheric pressure measurement, the pressure altitude is the imputed altitude that the International Standard Atmosphere (ISA) model predicts to have the same pressure as the observed value.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Given an atmospheric pressure measurement, the pressure altitude is the imputed altitude that the International Standard Atmosphere (ISA) model predicts to have the same pressure as the observed value. The National Oceanic and Atmospheric Administration (NOAA) published the following formula for directly converting atmospheric pressure in millibars (mb) to pressure altitude in feet (ft): h = 145366.45 \left[ 1 - \left( \frac{\text{Station pressure in millibars}}{10131.25} \right)^{0.190284} \right].

In aviation, pressure altitude is the height above a standard datum plane (SDP), which is a theoretical level where the weight of the atmosphere is as measured by a barometer. It indicates altitude obtained when an altimeter is set to an agreed baseline pressure under certain circumstances in which the aircraft’s altimeter would be unable to give a useful altitude readout.

Examples would be landing at a high altitude or near sea level under conditions of exceptionally high air pressure. Old altimeters were typically limited to displaying the altitude when set between 950 mb and 1030 mb. Standard pressure, the baseline used universally, is 1013.25 hectopascals (hPa), which is equivalent to 1013.25 mb or 29.92 inches of mercury (inHg).

This setting is equivalent to the atmospheric pressure at mean sea level (MSL) in the ISA.…

Given an atmospheric pressure measurement, the pressure altitude is the imputed altitude that the International Standard Atmosphere (ISA) model predicts to have the same pressure as the observed value. The National Oceanic and Atmospheric Administration (NOAA) published the following formula for directly converting atmospheric pressure in millibars (mb) to pressure altitude in feet (ft): h = 145366.45 \left[ 1 - \left( \frac{\text{Station pressure in millibars}}{1013.25} \right)^{0.190284} \right].

In aviation, pressure altitude is the height above a standard datum plane (SDP), which is a theoretical level where the weight of the atmosphere is as measured by a barometer. It indicates altitude obtained when an altimeter is set to an agreed baseline pressure under certain circumstances in which the aircraft’s altimeter would be unable to give a useful altitude readout.

Examples would be landing at a high altitude or near sea level under conditions of exceptionally high air pressure. Old altimeters were typically limited to displaying the altitude when set between 950 mb and 1030 mb. Standard pressure, the baseline used universally, is 1013.25 hectopascals (hPa), which is equivalent to 1013.25 mb or 29.92 inches of mercury (inHg).

This setting is equivalent to the atmospheric pressure at mean sea level (MSL) in the ISA. Pressure altitude is primarily used in aircraft-performance calculations and in high-altitude flight (i.e., above the transition altitude). p = 1013.25\left(1-\frac{h}{44307.694 \text{ m}}\right)^{5.25530} \text{ hPa} where are meter and refers to hecto-Pascal. \text{Pressure altitude (PA)} = \text{Elevation} + 30 \times (1013 - \text{QNH}).

For example, if the airfield elevation is 500 ~ \mathrm{ft} and the QNH is 993 ~ \mathrm{mb} , then \begin{align} \text{PA} & = 500 + 30 \times (1013 - 993) \\ & = 500 + 30 \times 20 \\ & = 500 + 600 \\ & = 1100. \end{align} If the altimeter uses inches of mercury, as common in the United States, Canada, and Japan, the following formula is used: \text{Pressure altitude (PA)} = \text{Elevation} + 1000 \times (29.92 - \text{Altimeter setting}). For example, if the airfield elevation is 500 ~ \mathrm{ft} and the altimeter setting is 29.32 ~ \mathrm{inHg} , then \begin{align} \text{PA} & = 500 + 1000 \times (29.92 - 29.32) \\ & = 500 + 1000 \times 0.6 \\ & = 500 + 600 \\ & = 1100. \end{align} Aircraft Mode “C” transponders report the pressure altitude to air traffic control; corrections for atmospheric pressure variations are applied by the recipient of the data.

The relationship between static pressure and pressure altitude is defined in terms of properties of the ISA.

See also

QNH Flight level Cabin altitude Density altitude Standard conditions for temperature and pressure Barometric formula

Text derived from https://en.wikipedia.org/w/index.php?oldid=1357043793 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Pressure altitude” revision 1357043793 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL