Lesson plan

Pressure head

In fluid mechanics, pressure head is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column on the base of its container. It may also be called static pressure head or simply static head (but not static head pressure). Mathematically this is expressed as: : \psi = \frac{p}{\gamma} = \frac{p}{\rho \, g} where : \psi Psi (Greek) is pressure head (which is actually a length, typically in units of meters or centimetres of water) : p is fluid pressure (i.e. force per unit area, typically expressed in pascals) : \gamma is the specific weight (i.e. force per unit volume, typically expressed in N/m 3 units) : \rho is the density of the fluid (i.e. mass per unit volume, typically expressed in kg/m 3 ) : g is acceleration due to gravity (i.e. rate of change of velocity, expressed in m/s 2 ). Note that in this equation, the pressure term may be gauge pressure or absolute pressure, depending on the design of the container and whether it is open to the ambient air or sealed without air.

Back to article

Article summary

In fluid mechanics, pressure head is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column on the base of its container. It may also be called static pressure head or simply static head (but not static head pressure). Mathematically this is expressed as: : \psi = \frac{p}{\gamma} = \frac{p}{\rho \, g} where : \psi Psi (Greek) is pressure head (which is actually a length, typically in units of meters or centimetres of water) : p is fluid pressure (i.e. force per unit area, typically expressed in pascals) : \gamma is the specific weight (i.e. force per unit volume, typically expressed in N/m 3 units) : \rho is the density of the fluid (i.e. mass per unit volume, typically expressed in kg/m 3 ) : g is acceleration due to gravity (i.e. rate of change of velocity, expressed in m/s 2 ). Note that in this equation, the pressure term may be gauge pressure or absolute pressure, depending on the design of the container and whether it is open to the ambient air or sealed without air.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.