Lesson plan

Pressure oxidation

Pressure oxidation is a process for extracting gold from refractory ore. The most common refractory ores are pyrite and arsenopyrite, which are sulfide ores that trap the gold within them. Refractory ores require pre-treatment before the gold can be adequately extracted. The pressure oxidation process is used to prepare such ores for conventional gold extraction processes such as cyanidation. It is performed in an autoclave at high pressure and temperature, where high-purity oxygen mixes with a slurry of ore. When the original sulfide minerals are oxidized at high temperature and pressure, it completely releases the trapped gold. Pressure oxidation has a very high gold recovery rate, normally at least 10% higher than roasting. The oxidation of the iron sulfide minerals produces sulfuric acid, soluble compounds such as ferric sulfate, and solids such as iron sulfate or jarosite. The iron-based solids produced pose an environmental challenge, as they can release acid and heavy metals to the environment. They can also make later precious metal recovery more difficult. Arsenic in the ore is converted to solid scorodite inside the autoclave, allowing it to be easily disposed of. This is an advantage over processes such as roasting where these toxic products are released as gases.…

Back to article

Article summary

Pressure oxidation is a process for extracting gold from refractory ore. The most common refractory ores are pyrite and arsenopyrite, which are sulfide ores that trap the gold within them. Refractory ores require pre-treatment before the gold can be adequately extracted. The pressure oxidation process is used to prepare such ores for conventional gold extraction processes such as cyanidation. It is performed in an autoclave at high pressure and temperature, where high-purity oxygen mixes with a slurry of ore. When the original sulfide minerals are oxidized at high temperature and pressure, it completely releases the trapped gold. Pressure oxidation has a very high gold recovery rate, normally at least 10% higher than roasting. The oxidation of the iron sulfide minerals produces sulfuric acid, soluble compounds such as ferric sulfate, and solids such as iron sulfate or jarosite. The iron-based solids produced pose an environmental challenge, as they can release acid and heavy metals to the environment. They can also make later precious metal recovery more difficult. Arsenic in the ore is converted to solid scorodite inside the autoclave, allowing it to be easily disposed of. This is an advantage over processes such as roasting where these toxic products are released as gases.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.