Print simulation

Print process simulation uses interactive simulation software to reproduce the operating conditions of complex multi-colour printing presses that often cost several million dollars.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Print process simulation uses interactive simulation software to reproduce the operating conditions of complex multi-colour printing presses that often cost several million dollars. Simulators are available for different printing process technologies (offset Sseetfed, heatset and coldset web offset, flexographic and gravure packaging), and include their consumables (like inks, plates, paper and other substrates) and where pertinent, in-line packaging operations (such as folding, cutting, and label creation).

Simulation in education and training

edit edit source

Press operators get hands-on experience in quality control and problem solving, without the costs, dangers, or unstructured training associated with learning on actual presses. A wide variety of printing conditions and problems are covered that are used for training, skills assessment, performance enhancement, and process analysis. Simulation is a means of presenting infrequent problems before they happen, so that they can be recognized when they do occur.[1] Exercises can evaluate specific competencies and if they are used to solve problems.[clarification needed] the NAA (Newspaper Association of America), and the Flexographic Technical Association.[2]

Printing simulation

edit edit source

Typical systems include monitoring and cost analysis that allow the training process to correlate with, versus the waste, cost, and time on a real press.[3] Simulators may be connected to a press control console (like the cockpit in a flight simulator) or run on standard micro computer hardware with single or multiple screens. Internet-based learning management systems now allow simulation exercises to be made in a one language/location and reviewed in another language by a training supervisor in a different location – what is traced is the interaction with the process, not the local name of the controls.[4]

As of 2013[update], it was estimated that over 2000 print simulators were installed worldwide. Users include technical schools, universities, printing companies, and their suppliers,[5] [6] who find that they cut costs, accelerate training time, and give a more thorough grounding in structured problem solving.

Simulators from Sinapse are used alongside real presses in the EuroSkills and WorldSkills competitions to select the best printer.[4][7]

In 2013, the print simulation cloud-based learning system DLMS won a PIA (Printing Industries of America) Intertech Award:[8] Language-independent, it automatically analysed and compares training results from different countries, in different languages. This DLMS was used at worldskillsLeipzig 2013[9] to analyze and compare results from contestants using simulators in more than ten languages.

References

edit edit source
  1. ^ Herman, Peter; Grimaldi, Laurent; Carl, Gerd (September 19–23, 2011). Development of knowledge and press-test based Heatset training simulator (abstract). 43rd annual conference of the International Circle of Educational Institutes for Graphic Arts, Technology and Management. Norrköping Sweden: International Circle of Teaching Institute for Polygraphic industry. Retrieved March 8, 2013. Wikipedia revision 1316998550, retrieved 2026-11-18
  2. ^ http://www.flexography.org flexography.org · bare citation; no publisher or title recorded · Wikipedia revision 1316998550, retrieved 2026-11-18
  3. ^ "Press simulation shows wide variety of uses at Transcontinental Mexico". 9 Mar 2011. Retrieved 8 Mar 2013. Wikipedia revision 1316998550, retrieved 2026-11-18
  4. ^ a b http://www.worldskills.org Wikipedia revision 1316998550, retrieved 2026-11-18
  5. ^ "Confronting the skills problem". Print & Paper Online Magazine: 247. Apr 2004. Wikipedia revision 1316998550, retrieved 2026-11-18
  6. ^ "Training Generation Y to Work". Wall Street Journal. 4 Mar 2007. Retrieved 8 Mar 2013. Wikipedia revision 1316998550, retrieved 2026-11-18
  7. ^ http://www.sinapseprint.com sinapseprint.com · bare citation; no publisher or title recorded · Wikipedia revision 1316998550, retrieved 2026-11-18
  8. ^ "Innovative Technologies Earn 2013 InterTech™ Award". www.printing.org. Archived from the original on 2013-08-18. Wikipedia revision 1316998550, retrieved 2026-11-18
  9. ^ Sinapse Print Simulators (23 July 2013). "WSL 2013 Print Media Technology" – via YouTube. Wikipedia revision 1316998550, retrieved 2026-11-18

Text derived from https://en.wikipedia.org/w/index.php?oldid=1316998550 under CC BY-SA 4.0; modifications have been made.