Prism (optics)

An optical prism is a transparent optical element with flat, polished surfaces that are designed to refract light.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

An optical prism is a transparent optical element with flat, polished surfaces that are designed to refract light. At least one surface must be angled—elements with only two parallel surfaces are windows, not prisms. The most familiar type of optical prism is the triangular prism, which has a triangular base and rectangular sides.

Not all optical prisms are geometric prisms, and not all geometric prisms would count as an optical prism. Prisms can be made from any material that is transparent to the wavelengths for which they are designed. Typical materials include glass, acrylic and fluorite.

A dispersive prism can be used to break white light up into its constituent spectral colors (the colors of the rainbow) to form a spectrum as described in the following section. Other types of prisms noted below can be used to reflect light, or to split light into components with different polarizations.

Dispersive

Dispersive prisms are used to break up light into its constituent spectral colors because the refractive index depends on wavelength; the white light entering the prism is a mixture of different wavelengths, each of which gets bent slightly differently. Blue light is slowed more than red light and will therefore be bent more than red light.

Abbe prism Amici prism and other types of compound prisms Féry prism Grism, a dispersive prism with a diffraction grating on its surface Littrow prism with mirror on its rear facet Pellin–Broca prism Triangular prism Spectral dispersion is the best known property of optical prisms, although not the most frequent purpose of using optical prisms in practice.

Reflective

Reflective prisms are used to reflect light, in order to flip, invert, rotate, deviate or displace the light beam. They are typically used to erect the image in binoculars or single-lens reflex cameras – without the prisms the image would be upside down for the user.

Reflective prisms use total internal reflection to achieve near-perfect reflection of light that strikes the facets at a sufficiently oblique angle. Prisms are usually made of optical glass which, combined with anti-reflective coating of input and output facets, leads to significantly lower light loss than metallic mirrors.

Odd number of reflections, image projects as flipped (mirrored) triangular prism reflector, projects image sideways (chromatic dispersion is zero in case of perpendicular input and output incidence) Roof pentaprism projects image sideways flipped along the other axis Dove prism projects image forward Corner-cube retroreflector projects image backwards Even number of reflections, image projects upright (without change in handedness; may or may not be rotated) Porro prism projects image backwards and displaced Porro–Abbe prism projects image forward, rotated by 180° and displaced Perger prism a development based on the Porro–Abbe prism, projects image forward, rotated by 180° and displaced Abbe–Koenig prism projects image forward, rotated by 180° and collinear (4 internal reflections [2 reflections are on roof plains]) Bauernfeind prism projects image sideways (inclined by 45°) Amici roof prism projects image sideways Pentaprism projects image sideways Schmidt–Pechan prism projects image forward, rotated by 180° (6 reflections [2 reflections are on roof plains]; composed of Bauernfeind part and Schmidt part) Uppendahl prism projects image forward, rotated by 180° and collinear (6 reflections [2 reflections are on roof plains]); composed of 3 prisms cemented together)

Polarizing

Another class is formed by polarizing prisms which use birefringence to split a beam of light into components of varying polarization. In the visible and UV regions, they have very low losses and their extinction ratio typically exceeds 10^5:1 , which is superior to other types of polarizers.

They may or may not employ total internal reflection; One polarization is separated by total internal reflection: Nicol prism Glan–Foucault prism Glan–Taylor prism, a high-power variant of which is also denoted as Glan–laser prism Glan–Thompson prism One polarization is deviated by different refraction only: Rochon prism Sénarmont prism Both polarizations are deviated by refraction: Wollaston prism Nomarski prism – a variant of the Wollaston prism where p- and s-components emerge displaced and converging towards each other; important for differential interference contrast microscopy Both polarizations stay parallel, but are spatially separated: polarisation beam displacers, typically made of thick anisotropic crystal with plan-parallel facets These are typically made of a birefringent crystalline material like calcite, but other materials like quartz and α-BBO may be necessary for UV applications, and others ( , and ) will extend transmission farther into the infrared spectral range. Prisms made of isotropic materials like glass will also alter polarization of light, as partial reflection under oblique angles does not maintain the amplitude ratio (nor phase) of the s- and p-polarized components of the light, leading to general elliptical polarization.

This is generally an unwanted effect of dispersive prisms. In some cases this can be avoided by choosing prism geometry which light enters and exits under perpendicular angle, by compensation through non-planar light trajectory, or by use of p-polarized light. Total internal reflection alters only the mutual phase between s- and p-polarized light.

Under well chosen angle of incidence, this phase is close to \pi/4 . Fresnel rhomb uses this effect to achieve conversion between circular and linear polarisation. This phase difference is not explicitly dependent on wavelength, but only on refractive index, so Fresnel rhombs made of low-dispersion glasses achieve much broader spectral range than quarter-wave plates.

They displace the beam, however. Doubled Fresnel rhomb, with quadruple reflection and zero beam displacement, substitutes a half-wave plate. Similar effect can also be used to make a polarization-maintaining optics.

In optometry

By shifting corrective lenses off axis, images seen through them can be displaced in the same way that a prism displaces images. Eye care professionals use prisms, as well as lenses off axis, to treat various orthoptics problems: Diplopia (double vision) Positive and negative fusion problems Prism spectacles with a single prism perform a relative displacement of the two eyes, thereby correcting eso-, exo, hyper- or hypotropia.

In contrast, spectacles with prisms of equal power for both eyes, called yoked prisms (also: conjugate prisms, ambient lenses or performance glasses) shift the visual field of both eyes to the same extent.

See also

Eyeglass prescription Minimum deviation Multiple-prism dispersion theory Prism (geometry) Prism compressor Prism dioptre Prism lighting Prism spectrometer Theory of Colours Triangular prism (geometry) Superprism

Java applet of refraction through a prism

Text derived from https://en.wikipedia.org/w/index.php?oldid=1333875343 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.