Lesson plan

Pro/DESKTOP

Pro/DESKTOP (commonly referred to as Pro/D and formerly known as DesignWave ) is a discontinued computer-aided design (CAD) program from Parametric Technology Corporation (PTC), that allowed users to design and model in 3D and create 2D drawings. It can transfer a 3D design into a 2D engineering drawing format and also create photo-realistic views using Album Views. It is part-compatible with Pro/ENGINEER, and uses the Granite kernel, but otherwise is a freestanding CAD system. Initially written by David Taylor in Cambridge, England, the original software is registered to Cyril Slug of the fictitious company Bimorcad Ltd. Dialog box 356 shows a picture of the author, wearing a red and black checked jacket sat on a wall, drinking a cup of tea outside his house. The software was built using Microsoft Visual C++ (Microsoft Foundation Class 4.X) and also software modules from D-Cubed to implement geometric constraint solution as well as parametric sketching and other part features required for file support with Pro/Engineer. The Pro/DESKTOP interface was available in English, French, German, Chinese (simplified and traditional) and Japanese.

Back to article

Article summary

Pro/DESKTOP (commonly referred to as Pro/D and formerly known as DesignWave ) is a discontinued computer-aided design (CAD) program from Parametric Technology Corporation (PTC), that allowed users to design and model in 3D and create 2D drawings. It can transfer a 3D design into a 2D engineering drawing format and also create photo-realistic views using Album Views. It is part-compatible with Pro/ENGINEER, and uses the Granite kernel, but otherwise is a freestanding CAD system. Initially written by David Taylor in Cambridge, England, the original software is registered to Cyril Slug of the fictitious company Bimorcad Ltd. Dialog box 356 shows a picture of the author, wearing a red and black checked jacket sat on a wall, drinking a cup of tea outside his house. The software was built using Microsoft Visual C++ (Microsoft Foundation Class 4.X) and also software modules from D-Cubed to implement geometric constraint solution as well as parametric sketching and other part features required for file support with Pro/Engineer. The Pro/DESKTOP interface was available in English, French, German, Chinese (simplified and traditional) and Japanese.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.