Probabilistic design
≈ 7 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
of distributions of applied load and material strength. Load applied and fracture stress are assumed to be normally distributed, and the failure probability is the overlap colored in grey. Probabilistic design is a discipline within engineering design. It deals primarily with the consideration and minimization of the effects of random variability upon the performance of an engineering system during the design phase. Typically, these effects studied and optimized are related to quality and reliability. It differs from the classical approach to design by assuming a small probability of failure instead of using the safety factor. Probabilistic design is used in a variety of different applications to assess the likelihood of failure. Disciplines which extensively use probabilistic design principles include product design, quality control, systems engineering, machine design, civil engineering (particularly useful in limit state design) and manufacturing.
of distributions of applied load and material strength. Load applied and fracture stress are assumed to be normally distributed, and the failure probability is the overlap colored in grey. ]] Probabilistic design is a discipline within engineering design. It deals primarily with the consideration and minimization of the effects of random variability upon the performance of an engineering system during the design phase. Typically, these effects studied and optimized are related to quality and reliability. It differs from the classical approach to design by assuming a small probability of failure instead of using the safety factor. Probabilistic design is used in a variety of different applications to assess the likelihood of failure. Disciplines which extensively use probabilistic design principles include product design, quality control, systems engineering, machine design, civil engineering (particularly useful in limit state design) and manufacturing.
Objective and motivations
When using a probabilistic approach to design, the designer no longer thinks of each variable as a single value or number. Instead, each variable is viewed as a continuous random variable with a probability distribution. From this perspective, probabilistic design predicts the flow of variability (or distributions) through a system. Because there are so many sources of random and systemic variability when designing materials and structures, it is greatly beneficial for the designer to model the factors studied as random variables. By considering this model, a designer can make adjustments to reduce the flow of random variability, thereby improving engineering quality. Proponents of the probabilistic design approach contend that many quality problems can be predicted and rectified during the early design stages and at a much reduced cost. Typically, the goal of probabilistic design is to identify the design that will exhibit the smallest effects of random variability. Minimizing random variability is essential to probabilistic design because it limits uncontrollable factors, while also providing a much more precise determination of failure probability. This could be the one design option out of several that is found to be most robust. Alternatively, it could be the only design option available, but with the optimum combination of input variables and parameters. This second approach is sometimes referred to as robustification, parameter design or design for six sigma. We can represent variance due to measurement uncertainties as a corrective factor B , which is multiplied by the true mean X to yield the measured mean of \bar X . Equivalently, \bar X = \bar B X . This yields the result \bar B = \frac{\bar X}{X} , and the variance of the corrective factor B is given as: Var[B]= \frac{Var[\bar X]}{X} = \frac{Var[X]}{nX} where B is the correction factor, X is the true mean, \bar X is the measured mean, and n is the number of measurements made. The second source of variability stems from the inaccuracies and uncertainties of the model used to calculate such parameters. These include the physical models we use to understand loading and their associated effects in materials. The uncertainty from the model of a physical measurable can be determined if both theoretical values according to the model and experimental results are available. The measured value \hat H(\omega) is equivalent to the theoretical model prediction H(\omega) multiplied by a model error of \phi(\omega) , plus the experimental error \varepsilon(\omega) . Equivalently, \hat H(\omega) = H(\omega) \phi(\omega) + \varepsilon(\omega) and the model error takes the general form: \phi(\omega) = \sum_{i = 0}^n a_i \omega^{n} where a_i are coefficients of regression determined from experimental data. Finally, the last variability source comes from the intrinsic variability of any physical measurable. There is a fundamental random uncertainty associated with all physical phenomena, and it is comparatively the most difficult to minimize this variability. Thus, each physical variable and measurable quantity can be represented as a random variable with a mean and a variability. P_f = P(R or equivalently, if we let the difference between yield stress and applied load equal a third function R-S = Q , then: P_f = \int\limits_{-\infty}^{\infty}\int\limits_{-\infty}^{\infty}f(R)f(S)dSdR = \int\limits_{-\infty}^{0} f(Q)dQ where the variance of the mean difference Q is given by \sigma_Q^{2} = \sqrt{\sigma_R^{2}+ \sigma_S^{2}} . The probabilistic design principles allow for precise determination of failure probability, whereas the classical model assumes absolutely no failure before yield strength. It is clear that the classical applied load vs. yield stress model has limitations, so modeling these variables with a probability distribution to calculate failure probability is a more precise approach. The probabilistic design approach allows for the determination of material failure under all loading conditions, associating quantitative probabilities to failure chance in place of a definitive yes or no.
Methods used to determine variability
In essence, probabilistic design focuses upon the prediction of the effects of variability. In order to be able to predict and calculate variability associated with model uncertainty, many methods have been devised and utilized across different disciplines to determine theoretical values for parameters such as stress and strain. Examples of theoretical models used alongside probabilistic design include: Finite element analysis Stochastic finite element method Boundary element method Meshfree methods Analytical methods (refer to classical design principles) Additionally, there are many statistical methods used to quantify and predict the random variability in the desired measurable. Some methods that are used to predict the random variability of an output include: the Monte Carlo method (including Latin hypercubes); propagation of error; design of experiments (DOE) the method of moments Statistical interference quality function deployment Failure mode and effects analysis
See also
Interval finite element Stochastic modeling First-order second-moment method Weibull distribution
Footnotes
References
Ang and Tang (2006) Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering. John Wiley & Sons. Ash (1993) The Probability Tutoring Book: An Intuitive Course for Engineers and Scientists (and Everyone Else). Wiley-IEEE Press. Clausing (1994) Total Quality Development: A Step-By-Step Guide to World-Class Concurrent Engineering. American Society of Mechanical Engineers. Haugen (1980) Probabilistic mechanical design. Wiley. Papoulis (2002) Probability, Random Variables and Stochastic Process. McGraw-Hill Publishing Co. Siddall (1982) Optimal Engineering Design. CRC. Dodson, B., Hammett, P., and Klerx, R. (2014) Probabilistic Design for Optimization and Robustness for Engineers John Wiley & Sons, Inc. Cederbaum G., Elishakoff I., Aboudi J. and Librescu L., Random Vibration and Reliability of Composite Structures, Technomic, Lancaster, 1992, XIII + pp. 191; Elishakoff I., Lin Y.K. and Zhu L.P., Probabilistic and Convex Modeling of Acoustically Excited Structures, Elsevier Science Publishers, Amsterdam, 1994, VIII + pp. 296; Elishakoff I., Probabilistic Methods in the Theory of Structures: Random Strength of Materials, Random Vibration, and Buckling, World Scientific, Singapore, , 2017
External links
Non Deterministic Approaches in Engineering
Text derived from https://en.wikipedia.org/w/index.php?oldid=1360730118 under CC BY-SA 4.0; modifications have been made.