Process chemistry

Uses your system voice; voice and rate in settings.

Snapshot

≈ 9 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Process chemistry is the arm of pharmaceutical chemistry concerned with the development and optimization of a synthetic scheme and pilot plant procedure to manufacture compounds for the drug development phase. Process chemistry is distinguished from medicinal chemistry, which is the arm of pharmaceutical chemistry tasked with designing and synthesizing molecules on small scale in the early drug discovery phase. Medicinal chemists are largely concerned with synthesizing a large number of compounds as quickly as possible from easily tunable chemical building blocks (usually for SAR studies). In general, the repertoire of reactions utilized in discovery chemistry is somewhat narrow (for example, the Buchwald-Hartwig amination, Suzuki coupling, and reductive amination are commonplace reactions). In contrast, process chemists are tasked with identifying a chemical process that is safe, cost and labor efficient, “green,” and reproducible, among other considerations. Oftentimes, in searching for the shortest, most efficient synthetic route, process chemists must devise creative synthetic solutions that eliminate costly functional group manipulations and oxidation/reduction steps. This article focuses exclusively on the chemical and manufacturing processes associated with the production of small molecule drugs.…

Process chemistry is the arm of pharmaceutical chemistry concerned with the development and optimization of a synthetic scheme and pilot plant procedure to manufacture compounds for the drug development phase. Process chemistry is distinguished from medicinal chemistry, which is the arm of pharmaceutical chemistry tasked with designing and synthesizing molecules on small scale in the early drug discovery phase. Medicinal chemists are largely concerned with synthesizing a large number of compounds as quickly as possible from easily tunable chemical building blocks (usually for SAR studies). In general, the repertoire of reactions utilized in discovery chemistry is somewhat narrow (for example, the Buchwald-Hartwig amination, Suzuki coupling, and reductive amination are commonplace reactions). In contrast, process chemists are tasked with identifying a chemical process that is safe, cost and labor efficient, “green,” and reproducible, among other considerations. Oftentimes, in searching for the shortest, most efficient synthetic route, process chemists must devise creative synthetic solutions that eliminate costly functional group manipulations and oxidation/reduction steps. This article focuses exclusively on the chemical and manufacturing processes associated with the production of small molecule drugs. Biological medical products (more commonly called “biologics”) represent a growing proportion of approved therapies. Additionally, the many complex factors associated with chemical plant engineering (for example, heat transfer and reactor design) and drug formulation will be treated cursorily. AE = \frac{\text{MW(product)}}{\sum \text{MW(raw materials)}}\times 100\% For example, the Claisen rearrangement and the Diels-Alder cycloaddition are examples of reactions that are 100 percent atom economical. On the other hand, a prototypical Wittig reaction has an especially poor atom economy (merely 20 percent in the example shown). Process synthetic routes should be designed such that atom economy is maximized for the entire synthetic scheme. Consequently, “costly” reagents such as protecting groups and high molecular weight leaving groups should be avoided where possible. An atom economy value in the range of 70 to 90 percent for an API synthesis is ideal, but it may be impractical or impossible to access certain complex targets within this range. Nevertheless, atom economy is a good metric to compare two routes to the same molecule. \begin{array} \hline & \text{Illustrative Example} & \text{Overall Yield}\\ \hline \color{BrickRed}\text{Linear Synthesis} & \ce{A ->[85\%] B ->[85\%] C ->[85\%] Product} & \color{BrickRed}{61.4\%}\\ \hline \color{PineGreen}\text{Convergent Synthesis} & \left. \begin{matrix}\ce{A ->[85\%] B} \\ \ce{D ->[85\%] E} \end{matrix} \quad \right\} \ce{-> Product} & \color{PineGreen}{72.3\%}\\ \hline \end{array} There are several strategies that are employed in the design of a process route to ensure the adequate overall yield of the pharmaceutical product. The first is the concept of convergent synthesis. Assuming a very good to excellent yield in each synthetic step, the overall yield of a multistep reaction can be maximized by combining several key intermediates at a late stage that are prepared independently from each other. Another strategy to maximize isolated yield (as well as time efficiency) is the concept of telescoping synthesis (also called one-pot synthesis). This approach describes the process of eliminating workup and purification steps from a reaction sequence, typically by simply adding reagents sequentially to a reactor. In this way, unnecessary losses from these steps can be avoided. Finally, to minimize overall cost, synthetic steps involving expensive reagents, solvents, or catalysts should be designed into the process route as late stage as possible, to minimize the amount of reagent used. In a pilot plant or manufacturing plant setting, yield can have a profound effect on the material cost of an API synthesis, so the careful planning of a robust route and the fine-tuning of reaction conditions are crucially important. After a synthetic route has been selected, process chemists will subject each step to exhaustive optimization in order to maximize the overall yield. Low yields are typically indicative of unwanted side product formation, which can raise red flags in the regulatory process as well as pose challenges for reactor cleaning operations. \text{VTO}=\frac{\text{nominal volume of all reactors} [\ce{m}^3]*\text{time per batch} [\ce h]}{\text{output per step} [\ce{kg}]} The process chemistry group at Boehringer Ingelheim, for example, targets a VTO of less than 1 for any given synthetic step or chemical process. Additionally, the raw conversion cost of an API synthesis (in dollars per batch) can be calculated from the VTO, given the operating cost and usable capacity of a particular reactor. Oftentimes, for large-volume APIs, it is economical to build a dedicated production plant rather than to use space in general pilot plants or manufacturing plants. E=\frac{\sum \text{mass of waste}}{\text{mass of isolated product}}=\frac{\sum \text{mass of materials}-\text{mass of isolated product}}{\text{mass of isolated product}} A similar measure, the process mass intensity (PMI) calculates the ratio of the total mass of materials to the mass of the isolated product. \text{PMI}=\frac{\sum \text{mass of materials}}{\text{mass of isolated product}} = E +1 For both metrics, all materials used in all synthetic steps, including reaction and workup solvents, reagents, and catalysts, are counted, even if solvents or catalysts are recycled in practice. Inconsistencies in E-factor or PMI computations may arise when choosing to consider the waste associated with the synthesis of outsourced intermediates or common reagents. Additionally, the environmental impact of the generated waste is ignored in this calculation; therefore, the environmental quotient (EQ) metric was devised, which multiplies the E-factor by an “unfriendliness quotient” associated with various waste streams. A reasonable target for the E-factor or PMI of a single synthetic step is any value between 10 and 40. \text{PEI yield}=\frac{\text{average yield}\cdot 100\%}{\text{aspiration level yield}}=\frac{\text{average yield}\cdot 100\%}{\frac{\text{median yield}+\text{best yield}}{2}} In practice, if a process is high-yielding and has a narrow distribution of yield outcomes, then the PEI should be very high. Processes that are not easily reproducible may have a higher aspiration level yield and a lower average yield, lowering the PEI yield. Similarly, a PEI cycle time may be defined as follows: \text{PEI cycle time}=\frac{\text{aspiration level cycle time}\cdot 100\%}{\text{average cycle time}}=\frac{\frac{\text{median cycle time}+\text{best cycle time}}{2}\cdot 100\%}{\text{average cycle time}} For this expression, the terms are inverted to reflect the desirability of shorter cycle times (as opposed to higher yields). The reproducibility of cycle times for critical processes such as reaction, centrifugation, or drying may be critical if these operations are rate-limiting in the manufacturing plant setting. For example, if an isolation step is particularly difficult or slow, it could become the bottleneck for API synthesis, in which case the reproducibility and optimization of that operation become critical. For an API manufacturing process, all PEI metrics (yield and cycle times) should be targeted at 98 to 100 percent. \text{VTO} = \frac{6\text{ m}^{3} \times 48\text{ h}}{35\text{ kg}} = 8.2\text{ m}^{3} \cdot \text{ h / kg} This VTO value was considered prohibitively high and a steep investment in a dedicated plant would have been necessary even before launching Phase III trials with this API, given its large projected annual demand. But after reaction development and optimization, the process team was able to improve the reaction yield to 93 percent after just 1 hour (plus 12 hours for workup and reactor cleaning time) at a diene concentration of 0.2 M. With these modifications, a 6-cubic meter reactor filled to 80% capacity afforded 799 kg of the desired product. For this optimized reaction: \text{VTO} = \frac{6\text{ m}^{3}\times 13\text{ h}}{799\text{ kg}} = 0.1\text{ m}^{3} \cdot \text{ h / kg} Thus, after optimization, this synthetic step became less costly in terms of equipment and time and more practical to perform in a standard manufacturing facility, eliminating the need for costly investment in a new dedicated plant.

Academic research institutes in process chemistry

Institute of Process Research & Development, University of Leeds

Text derived from https://en.wikipedia.org/w/index.php?oldid=1358315185 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.