Programmable ROM

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A programmable read-only memory (PROM) is a form of digital memory where the contents are set after the device is manufactured. Once set, the contents are then permanent. A PROM is one type of read-only memory (ROM). PROMs are usually used in digital electronic devices to store low level programs such as firmware or microcode. PROMs may be used during development of a system that will ultimately be converted to ROMs in a mass-produced version. These types of memories are used in microcontrollers, video game consoles, mobile phones, radio-frequency identification (RFID) tags, implantable medical devices, high-definition multimedia interfaces (HDMI), and in many other consumer and automotive products. PROMs are manufactured blank and, depending on the technology, can be programmed at the wafer, final test, or system stage. Blank PROM chips are programmed by plugging them into a device called a PROM programmer. A typical PROM device has an array of memory cells. The bipolar transistors in the cells have an emitter that is connected to a fuse called a polyfuse. To program a PROM is to strategically blow the polyfuses.

A programmable read-only memory (PROM) is a form of digital memory where the contents are set after the device is manufactured. Once set, the contents are then permanent. A PROM is one type of read-only memory (ROM). PROMs are usually used in digital electronic devices to store low level programs such as firmware or microcode. PROMs may be used during development of a system that will ultimately be converted to ROMs in a mass-produced version. These types of memories are used in microcontrollers, video game consoles, mobile phones, radio-frequency identification (RFID) tags, implantable medical devices, high-definition multimedia interfaces (HDMI), and in many other consumer and automotive products. PROMs are manufactured blank and, depending on the technology, can be programmed at the wafer, final test, or system stage. Blank PROM chips are programmed by plugging them into a device called a PROM programmer. A typical PROM device has an array of memory cells. The bipolar transistors in the cells have an emitter that is connected to a fuse called a polyfuse. To program a PROM is to strategically blow the polyfuses.

See also

Intel HEX EPROM EEPROM

References

Bibliography

1977 Intel Memory Design Handbook - archive.org - intel-vintage.info View the US "Switch Matrix" Patent #3028659 at US Patent Office or Google View Kilopass Technology Patent US "High density semiconductor memory cell and memory array using a single transistor and having variable gate oxide breakdown" Patent #6940751 at US Patent Office or Google View Sidense US "Split Channel Antifuse Array Architecture" Patent #7402855 at US Patent Office or Google View the US "Method of Manufacturing Semiconductor Integrated Circuits" Patent #3634929 at US Patent Office or Google CHOI et al. (2008). For the Advantages and Disadvantages table, see Ramamoorthy, G: "Dataquest Insight: Nonvolatile Memory IP Market, Worldwide, 2008-2013", page 10. Gartner, 2009

External links

Looking inside a 1970s PROM chip that stores data in microscopic fuse - shows die of a 256x4 MMI 5300 PROM

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373422304 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.