Project Morpheus
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Project Morpheus was a NASA project that began in 2010 to develop a vertical takeoff and vertical landing (VTVL) test vehicle called the Morpheus Lander. It is intended to demonstrate a new nontoxic spacecraft propellant system (methane and oxygen) and an autonomous landing and hazard detection technology. The prototype planetary lander is capable of autonomous flight, including vertical takeoff and landings. The vehicles are NASA-designed robotic landers that will be able to land and take off with of cargo on the Moon. The prospect is an engine that runs reliably on propellants that are not only cheaper and safer here on Earth, but could also be potentially manufactured on the Moon and Mars. (See: In-situ resource utilization.) The Alpha prototype lander was manufactured and assembled at NASA's Johnson Space Center (JSC) and Armadillo Aerospace's facility near Dallas. The prototype lander is a "spacecraft" that is about in diameter, weighs approximately and consists of four silver spherical propellant tanks topped by avionics boxes and a web of wires. The project is trying out cost and time saving "lean development" engineering practices. Other project activities include appropriate ground operations, flight operations, range safety and the instigation of software development procedures. Landing pads and control centers were also constructed.…
Project Morpheus was a NASA project that began in 2010 to develop a vertical takeoff and vertical landing (VTVL) test vehicle called the Morpheus Lander. It is intended to demonstrate a new nontoxic spacecraft propellant system (methane and oxygen) and an autonomous landing and hazard detection technology. The prototype planetary lander is capable of autonomous flight, including vertical takeoff and landings. The vehicles are NASA-designed robotic landers that will be able to land and take off with of cargo on the Moon. The prospect is an engine that runs reliably on propellants that are not only cheaper and safer here on Earth, but could also be potentially manufactured on the Moon and Mars. (See: In-situ resource utilization.) The Alpha prototype lander was manufactured and assembled at NASA's Johnson Space Center (JSC) and Armadillo Aerospace's facility near Dallas. The prototype lander is a "spacecraft" that is about in diameter, weighs approximately and consists of four silver spherical propellant tanks topped by avionics boxes and a web of wires. The project is trying out cost and time saving "lean development" engineering practices. Other project activities include appropriate ground operations, flight operations, range safety and the instigation of software development procedures. Landing pads and control centers were also constructed. From the project start in July 2010, about $14 million was spent on materials in the following 4 years; so the Morpheus project is considered lean and low-cost for NASA. In 2012 the project employed 25 full-time team members, and 60 students1. At any one time an average of 40 people worked on the project. Project Morpheus devised and used streamlined processes and practices. The Morpheus Lander's last flight was in December 2014. As there were no funds for further flights the lander was returned to JSC in February 2015. Six formal documents were produced by the project. At the end of project review on March 12, 2015, it was estimated that $50 million had been saved by the lean development methods, minimising documentation, and buying parts from Home Depot, MSC Industrial Direct, and W. W. Grainger.
Objectives
The primary objectives of the Morpheus project were to demonstrate: the integrated system performance of the autonomous Guidance, Navigation and Control (GN&C) system, terrain hazard avoidance sensors, the coupling of the sensors with the GN&C, the utilization of an integrated Main/RCS engine liquid oxygen and liquid methane propulsion system. Specifically, the Morpheus project and the Autonomous Landing Hazard Avoidance Technology (ALHAT) project provide technological foundations for key components necessary to transport humans beyond low Earth orbit. The testbed can optionally be fitted with up to 1000 lb cargo, allowing fitting of the 400lb Autonomous Landing Hazard Avoidance Technology (ALHAT) equipment, which permits landings without operator interaction. ALHAT permits the lander to fly to a specified location with high accuracy and to automatically avoid hazards including slopes greater than 5 degrees and boulders taller than 30 cm. In June 2013 the team remarked on the potential to scale the 500 kg payload lander up to one able to land a habitable module with a crew on places such as the Moon.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1355226844 under CC BY-SA 4.0; modifications have been made.