Project Y

Uses your system voice; voice and rate in settings.

Snapshot

≈ 16 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Los Alamos Laboratory, also known as Project Y, was a secret scientific laboratory established by the Manhattan Project and overseen by the University of California during World War II. It was operated in partnership with the United States Army. Its mission was to design and build the first atomic bombs. J. Robert Oppenheimer was its first director, serving from 1943 to December 1945, when he was succeeded by Norris Bradbury. In order to enable scientists to freely discuss their work while preserving security, the laboratory was located on the isolated Pajarito Plateau in northern New Mexico. The wartime laboratory occupied buildings that had once been part of the Los Alamos Ranch School. The development effort initially focused on a gun-type fission weapon using plutonium called Thin Man. In April 1944, the Los Alamos Laboratory determined that the rate of spontaneous fission in plutonium bred in a nuclear reactor was too great due to the presence of plutonium-240 and would cause a predetonation, a nuclear chain reaction before the core was fully assembled. Oppenheimer then reorganized the laboratory and orchestrated an all-out and ultimately successful effort on an alternative design proposed by John von Neumann, an implosion-type nuclear weapon, which was called Fat Man. A variant of the gun-type design known as Little Boy was developed using uranium-235.…

The Los Alamos Laboratory, also known as Project Y, was a secret scientific laboratory established by the Manhattan Project and overseen by the University of California during World War II. It was operated in partnership with the United States Army. Its mission was to design and build the first atomic bombs. J. Robert Oppenheimer was its first director, serving from 1943 to December 1945, when he was succeeded by Norris Bradbury. In order to enable scientists to freely discuss their work while preserving security, the laboratory was located on the isolated Pajarito Plateau in northern New Mexico. The wartime laboratory occupied buildings that had once been part of the Los Alamos Ranch School. The development effort initially focused on a gun-type fission weapon using plutonium called Thin Man. In April 1944, the Los Alamos Laboratory determined that the rate of spontaneous fission in plutonium bred in a nuclear reactor was too great due to the presence of plutonium-240 and would cause a predetonation, a nuclear chain reaction before the core was fully assembled. Oppenheimer then reorganized the laboratory and orchestrated an all-out and ultimately successful effort on an alternative design proposed by John von Neumann, an implosion-type nuclear weapon, which was called Fat Man. A variant of the gun-type design known as Little Boy was developed using uranium-235. Chemists at the Los Alamos Laboratory developed methods of purifying uranium and plutonium, the latter a metal that only existed in microscopic quantities when Project Y began. Its metallurgists found that plutonium had unexpected properties, but were nonetheless able to cast it into metal spheres. The laboratory built the Water Boiler, an aqueous homogeneous reactor that was the third reactor in the world to become operational. It also researched the Super, a hydrogen bomb that would use a fission bomb to ignite a nuclear fusion reaction in deuterium and tritium. The Fat Man design was tested in the Trinity nuclear test in July 1945. Project Y personnel formed pit crews and assembly teams for the atomic bombings of Hiroshima and Nagasaki and participated in the bombing as weaponeers and observers. After the war ended, the laboratory supported the Operation Crossroads nuclear tests at Bikini Atoll. A new Z Division was created to control testing, stockpiling and bomb assembly activities, which were concentrated at Sandia Base. The Los Alamos Laboratory became Los Alamos Scientific Laboratory in 1947. s at ambient pressure: alpha (α), beta (β), gamma (γ), delta (δ), delta prime (δ'), & epsilon (ε) |alt=A graph showing change in density with increasing temperature upon sequential phase transitions between alpha, beta, gamma, delta, delta' and epsilon phases The notion of spontaneous fission had been raised by Niels Bohr and John Archibald Wheeler in their 1939 treatment of the mechanism of nuclear fission. The first attempt to discover spontaneous fission in uranium was made by Willard Libby, but he failed to detect it. It had been observed in Britain by Frisch and Titterton, and independently in the Soviet Union by Georgy Flyorov and Konstantin Petrzhak in 1940; the latter are generally credited with the discovery. Compton had also heard from the French physicist Pierre Auger that Frédéric Joliot-Curie had detected what might have been spontaneous fission in polonium. If true, it might preclude the use of polonium in the neutron initiators; if true for plutonium, it might mean that the gun-type design would not work. The consensus at the Los Alamos Laboratory was that it was not true, and that Joliot-Curie's results had been distorted by impurities. At the Los Alamos Laboratory, Emilio Segrè's P-5 (Radioactivity) Group set out to measure it in uranium-234, −235 and −238, plutonium, polonium, protactinium and thorium. They were not too worried about the plutonium itself; their main concern was the issue Chadwick had raised about interaction with light element impurities. Segrè and his group of young physicists set up their experiment in an old Forest Service log cabin in Pajarito Canyon, about from the Technical Area, in order to minimize background radiation emanating for other research at the Los Alamos Laboratory. By August 1943, they had good values for all the elements tested except for plutonium, which they were unable to measure accurately enough because the only sample they had was five 20 μg samples created by the 60-inch cyclotron at Berkeley. They did observe that measurements taken at Los Alamos were greater than those made at Berkeley, which they attributed to cosmic rays, which are more numerous at Los Alamos, which is above sea level. While their measurements indicated a spontaneous fission rate of 40 fissions per gram per hour, which was high but acceptable, the error margin was unacceptably large. In April 1944 they received a sample from the X-10 Graphite Reactor. Tests soon indicated 180 fissions per gram per hour, which was unacceptably high. It fell to Bacher to inform Compton, who was visibly shaken. Suspicion fell on plutonium-240, an isotope that had not yet been discovered, but whose existence had been suspected, it being simply created by a plutonium-239 nucleus absorbing a neutron. What had not been suspected was its high spontaneous fission rate. Segrè's group measured it at 1.6 million fissions per gram per hour, compared with just 40 per gram per hour for plutonium-239. This meant that reactor-bred plutonium was unsuitable for use in a gun-type weapon. The plutonium-240 would start the chain reaction too quickly, causing a predetonation that would release enough energy to disperse the critical mass before enough plutonium reacted. A faster gun was suggested but found to be impractical. So too was the possibility of separating the isotopes, as plutonium-240 is even harder to separate from plutonium-239 than uranium-235 from uranium-238. (red). It is surrounded by the plutonium hemispheres. There is a small air gap (white, not in the original Fat Man design) and then the uranium tamper. Around that is the aluminium pusher (purple). This is encased in the explosive lenses (gold). Colors are the same as in the diagram opposite. |alt=Diagram showing fast explosive, slow explosive, uranium tamper, plutonium core and neutron initiator. By July 1944, Oppenheimer had concluded that plutonium could not be used in a gun design. On July 18, he wrote to Groves that "at the present time the method to which an over-riding priority must be assigned is the method of implosion." The accelerated effort on an implosion design, codenamed Fat Man, began in August 1944 when Oppenheimer implemented a sweeping reorganization of the Los Alamos laboratory to focus on implosion. Two new groups were created at Los Alamos to develop the implosion weapon, X (for explosives) Division headed by Kistiakowsky and G (for gadget) Division under Robert Bacher. Although Teller was head of the T-1 (Implosion and Super) Group, Bethe considered that Teller was spending too much time on the Super, which had been given a low priority by Bethe and Oppenheimer. In June 1944, Oppenheimer created a dedicated Super Group under Teller, who was made directly responsible to Oppenheimer, and Peierls became head of the T-1 (Implosion) Group. In September, Teller's group became the F-1 (Super and General Theory) Group, part of the Enrico Fermi's new F (Fermi) Division. The new design that von Neumann and T Division, most notably Rudolf Peierls, devised used explosive lenses to focus the explosion onto a spherical shape using a combination of both slow and fast high explosives. A visit by Sir Geoffrey Taylor in May 1944 raised questions about the stability of the interface between the core and the depleted uranium tamper. As a result, the design was made more conservative. The ultimate expression of this was the adoption of Christy's proposal that the core be solid instead of hollow. The design of lenses that detonated with the proper shape and velocity turned out to be slow, difficult and frustrating. Various explosives were tested before settling on composition B as the fast explosive and baratol as the slow explosive. The final design resembled a soccer ball, with 20 hexagonal and 12 pentagonal lenses, each weighing about . Getting the detonation just right required fast, reliable and safe electrical detonators, of which there were two for each lens for reliability. It was therefore decided to use exploding-bridgewire detonators, a new invention developed at Los Alamos by a group led by Luis Alvarez. A contract for their manufacture was given to Raytheon. To study the behavior of converging shock waves, Robert Serber devised the RaLa Experiment, which used the short-lived radioisotope lanthanum-140, a potent source of gamma radiation. The gamma ray source was placed in the center of a metal sphere surrounded by the explosive lenses, which in turn were inside in an ionization chamber. This allowed the taking of an X-ray movie of the implosion. The lenses were designed primarily using this series of tests. In his history of the Los Alamos project, David Hawkins wrote: "RaLa became the most important single experiment affecting the final bomb design". Within the explosives was the thick aluminum pusher, which provided a smooth transition from the relatively low density explosive to the next layer, the thick tamper of natural uranium. Its main job was to hold the critical mass together as long as possible, but it would also reflect neutrons back into the core. Some part of it might fission as well. To prevent predetonation by an external neutron, the tamper was coated in a thin layer of boron. A polonium-beryllium modulated neutron initiator, known as an "urchin" because its shape resembled the inner shell of a sea urchin, was developed to start the chain reaction at precisely the right moment. This work with the chemistry and metallurgy of radioactive polonium was directed by Charles Allen Thomas of the Monsanto Company and became known as the Dayton Project. Testing required up to 500 curies per month of polonium, which Monsanto was able to deliver. The whole assembly was encased in a duralumin bomb casing to protect it from bullets and flak. The ultimate task of the metallurgists was to determine how to cast plutonium into a sphere. The brittle α phase that exists at room temperature changes to the plastic β phase at higher temperatures. Attention then shifted to the even more malleable δ phase that normally exists in the range. It was found that this was stable at room temperature when alloyed with aluminum, but aluminum emits neutrons when bombarded with alpha particles, which would exacerbate the pre-ignition problem. The metallurgists then hit upon a plutonium–gallium alloy, which stabilized the δ phase and could be hot pressed into the desired spherical shape. As plutonium was found to corrode readily, the sphere was coated with nickel. The work proved dangerous. By the end of the war, half the experienced chemists and metallurgists had to be removed from work with plutonium when unacceptably high levels of the element appeared in their urine. A minor fire at Los Alamos in January 1945 led to a fear that a fire in the plutonium laboratory might contaminate the whole town, and Groves authorized the construction of a new facility for plutonium chemistry and metallurgy, which became known as the DP-site. The hemispheres for the first plutonium pit (or core) were produced and delivered on 2 July 1945. Three more hemispheres followed on 23 July and were delivered three days later. . In the front row are (left to right) Norris Bradbury, John Manley, Enrico Fermi and J. M. B. Kellogg. Robert Oppenheimer, in dark coat, is behind Manley; to Oppenheimer's left is Richard Feynman. The Army officer on the left is Colonel Oliver Haywood.|alt=A group of men in shirtsleeves sitting on folding chairs By September 1943, the values of the D-D and T-D had been revised upwards, raising hopes that a fusion reaction could be started at lower temperatures. Teller was sufficiently optimistic about the Super, and sufficiently concerned about reports that the Germans were interested in deuterium, to ask the Governing Board to raise its priority. The board agreed to some extent, but ruled that only one person could be spared to work on it full-time. Oppenheimer designated Konopinski, who would spend the rest of the war working on it. Nonetheless, in February 1944, Teller added Stanislaw Ulam, Jane Roberg, Geoffrey Chew, and Harold and Mary Argo to his T-1 Group. Ulam calculated the inverse Compton cooling, while Roberg worked out the ignition temperature of T-D mixtures. Maria Goeppert joined the group in February 1945. Teller argued for an increase in resources for Super research on the basis that it appeared to be far more difficult than anticipated. The board declined to do so, on the grounds that it was unlikely to bear fruit before the war ended, but did not cut it entirely. Indeed, Oppenheimer asked Groves to breed some tritium from deuterium in the X-10 Graphite Reactor. For some months Teller and Bethe argued about the priority of the Super research. In June 1944, Oppenheimer removed Teller and his Super Group from Bethe's T Division and placed it directly under himself. In September, it became the F-1 (Super) Group in Fermi' s F Division. Over the following months, Super research continued unabated. It was calculated that burning of liquid deuterium would release the energy of , enough to devastate . The Super Group was transferred back to T Division on 14 November 1945. A colloquium on the Super was held at the Los Alamos Laboratory in April 1946 to review the work done during the war. Teller gave an outline of his "Classic Super" concept, and Nicholas Metropolis and Anthony L. Turkevich presented the results of calculations that had been made concerning thermonuclear reactions. The final report on the Super, issued in June and prepared by Teller and his group, remained upbeat about the prospect of the Super being successfully developed, although that impression was not universal among those present at the colloquium. Work had to be curtailed in June 1946 due to the loss of staff. By 1950, calculations would show that the Classic Super would not work; that it would not only be unable to sustain thermonuclear burning in the deuterium fuel, but would be unable to ignite it in the first place.

Health and safety

at Los Alamos|alt=A shack surrounded by pine trees. There is snow on the ground. A man and a woman in white lab coats are pulling on a rope, which is attached to a small trolley on a wooden platform. On top of the trolley is a large cylindrical object. A medical program was established at Los Alamos under Captain James Findley Nolan of the United States Army Medical Corps. Initially, a small five-bed infirmary was established for civilians, and a three-bed infirmary for military personnel. More serious cases were handled by the Army's Bruns General Hospital in Santa Fe, but this was soon regarded as unsatisfactory due to the loss of time due to the long trip, and security risks. Nolan recommended that the infirmaries be consolidated and expanded into a 60-bed hospital. A 54-bed hospital was opened in 1944, staffed by Army personnel. A dentist arrived in March 1944. A Veterinary Corps officer, Captain J. Stevenson, had already been assigned to look after the guard dogs. Laboratory facilities for medical research were limited, but some research was conducted into the effects of radiation, and the absorption and toxic effects of metals, particularly plutonium and beryllium, mainly as a result of accidents. The Health Group began conducting urine tests of laboratory workers in early 1945, and many of these revealed dangerous levels of plutonium. Work on the Water Boiler also occasionally exposed workers to dangerous fission products. There were 24 fatal accidents at Los Alamos between its opening in 1943 and September 1946, most involving construction workers. Four scientists died, including Harry Daghlian and Louis Slotin in criticality accidents involving the demon core.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372281784 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

21 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.