Lesson plan

PS Eagle III

PS Eagle III was a passenger-carrying paddle steamer that was built and sailed on the Clyde, and was twice requisitioned by the Admiralty to serve as a minesweeper during the world wars. In 1909, Buchanan Steamers ordered a passenger steamer from Glasgow shipbuilders A. & J. Inglis. While Inglis sub-contracted the construction of the hull to Napier and Miller, they built and installed the engine and boiler for the ship themselves. Her machinery was of a traditional design, with a Napier-type "haystack" boiler and the last simple diagonal engine to be fitted to a Clyde steamer. She was launched on 14 April 1910 and entered service that summer, however on her first regular trip from Glasgow to Rothesay she listed heavily to port almost submerging the port paddle wheel and lifting the starboard wheel almost clear of the water. After repeating the same list on two or three subsequent journeys she was withdrawn from service, the design flaw was remedied by extensively re-building her hull bottom to give it a wider shape, and she was then returned to service in 1911. Like other Clyde steamers, in 1917, she was requisitioned by the Admiralty to serve as a minesweeper during the First World War, based out of Grimsby. Before entering Naval service she was modified, with the most significant change being to bring her bridge forward in front of her funnel.…

Back to article

Article summary

PS Eagle III was a passenger-carrying paddle steamer that was built and sailed on the Clyde, and was twice requisitioned by the Admiralty to serve as a minesweeper during the world wars. In 1909, Buchanan Steamers ordered a passenger steamer from Glasgow shipbuilders A. & J. Inglis. While Inglis sub-contracted the construction of the hull to Napier and Miller, they built and installed the engine and boiler for the ship themselves. Her machinery was of a traditional design, with a Napier-type "haystack" boiler and the last simple diagonal engine to be fitted to a Clyde steamer. She was launched on 14 April 1910 and entered service that summer, however on her first regular trip from Glasgow to Rothesay she listed heavily to port almost submerging the port paddle wheel and lifting the starboard wheel almost clear of the water. After repeating the same list on two or three subsequent journeys she was withdrawn from service, the design flaw was remedied by extensively re-building her hull bottom to give it a wider shape, and she was then returned to service in 1911. Like other Clyde steamers, in 1917, she was requisitioned by the Admiralty to serve as a minesweeper during the First World War, based out of Grimsby. Before entering Naval service she was modified, with the most significant change being to bring her bridge forward in front of her funnel.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.