Pull off test

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A pull-off test, also called stud pull test, is a type of test in which an adhesive connection is made between a stud and a carrier (or object to be tested) by using a glue, possibly an epoxy or polyester resin, that is stronger than the bond that needs to be tested. The force required to pull the stud from the surface, together with the carrier, is measured. Simple mechanical hand-operated loading equipment has been developed for this purpose. When higher accuracy is required, tests can be performed with more advanced equipment called a bond tester. A bond tester provides more control and possibly automation. Applying the glue automatically and curing with UV light is the next step in automation. This methodology can also be used to measure direct tensile strength or/and the bond strength between two different layers. MIL-STD-883 methods 2011.9 destructive bond pull test and 2031.1 flip chip pull off test apply, as well as JEDEC JESD22-B109. Partial coring may be used, if necessary, to eliminate surface skin effects.

A pull-off test, also called stud pull test, is a type of test in which an adhesive connection is made between a stud and a carrier (or object to be tested) by using a glue, possibly an epoxy or polyester resin, that is stronger than the bond that needs to be tested. The force required to pull the stud from the surface, together with the carrier, is measured. Simple mechanical hand-operated loading equipment has been developed for this purpose. When higher accuracy is required, tests can be performed with more advanced equipment called a bond tester. A bond tester provides more control and possibly automation. Applying the glue automatically and curing with UV light is the next step in automation. This methodology can also be used to measure direct tensile strength or/and the bond strength between two different layers. MIL-STD-883 methods 2011.9 destructive bond pull test and 2031.1 flip chip pull off test apply, as well as JEDEC JESD22-B109. Partial coring may be used, if necessary, to eliminate surface skin effects.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1220267574 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001220267574 · captured 1713806734.0 · version history

Cite this page as: encyclopegia.org, “Pull off test”, snapshot enwiki-001220267574. https://encyclopegia.org/a/pull-off-test

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.