Pulley

Uses your system voice; voice and rate in settings.

Q15841220Snapshot

≈ 2 min read

Names in other languages

  • DeutschPulley
  • EnglishPulley

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A pulley is a wheel on an axle or shaft enabling a taut cable or belt passing over the wheel to move and change direction, or transfer power between itself and a shaft. A pulley may have a groove or grooves between flanges around its circumference to locate the cable or belt. The drive element of a pulley system can be a rope, cable, belt, or chain.

A pulley is a wheel on an axle or shaft enabling a taut cable or belt passing over the wheel to move and change direction, or transfer power between itself and a shaft. A pulley may have a groove or grooves between flanges around its circumference to locate the cable or belt. The drive element of a pulley system can be a rope, cable, belt, or chain. Consider the set of pulleys that form the moving block and the parts of the rope that support this block. If there are p of these parts of the rope supporting the load W, then a force balance on the moving block shows that the tension in each of the parts of the rope must be W/p. This means the input force applied to the rope is T=W/p. Thus, the block and tackle reduces the input force by the factor p. n T -W = 0. The ratio of the load to the input tension force is the mechanical advantage MA of the pulley system, MA = \frac{W}{T} = n. Thus, the mechanical advantage of the system is equal to the number of sections of rope supporting the load.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370154906 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

12 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.