Pulse electrolysis

Pulse electrolysis is an alternate electrolysis method that utilises a pulsed direct current to initiate non-spontaneous chemical reactions.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Pulse electrolysis is an alternate electrolysis method that utilises a pulsed direct current to initiate non-spontaneous chemical reactions. Also known as pulsed direct current (PDC) electrolysis, the increased number of variables that it introduces to the electrolysis method can change the application of the current to the electrodes and the resulting outcome.

This varies from direct current (DC) electrolysis, which only allows the variation of one value, the voltage applied. By utilising conventional pulse width modulation (PMW), multiple dependent variables can be altered, including the type of waveform, typically a rectangular pulse wave, the duty cycle, and the frequency.

Currently, there has been a focus on theoretical and experimental research into PDC electrolysis in terms of the electrolysis of water to produce hydrogen. Claims have been made that there is a possibility it can result in a higher electrical efficiency in comparison to DC water electrolysis, but past research has shown this is not the case.

The varying voltage and current added on top of the DC cause additional energy consumption with no effect on the hydrogen production. Because of the increasing energy consumption, attempts to replicate claimed benefits experimentally have not succeeded, and have found negative effects on the electrolyser longevity instead.…

Pulse electrolysis is an alternate electrolysis method that utilises a pulsed direct current to initiate non-spontaneous chemical reactions. Also known as pulsed direct current (PDC) electrolysis, the increased number of variables that it introduces to the electrolysis method can change the application of the current to the electrodes and the resulting outcome.

This varies from direct current (DC) electrolysis, which only allows the variation of one value, the voltage applied. By utilising conventional pulse width modulation (PMW), multiple dependent variables can be altered, including the type of waveform, typically a rectangular pulse wave, the duty cycle, and the frequency.

Currently, there has been a focus on theoretical and experimental research into PDC electrolysis in terms of the electrolysis of water to produce hydrogen. Claims have been made that there is a possibility it can result in a higher electrical efficiency in comparison to DC water electrolysis, but past research has shown this is not the case.

The varying voltage and current added on top of the DC cause additional energy consumption with no effect on the hydrogen production. Because of the increasing energy consumption, attempts to replicate claimed benefits experimentally have not succeeded, and have found negative effects on the electrolyser longevity instead.

PDC electrolysis is not only confined to the electrolysis of water. Uses in industry such as electroplating and electrocrystallisation are also undergoing research due to the wider range of properties that can be achieved. The various and alterable effects of using intermittent pulses in PDC electrolysis has resulted in an area of interest that could benefit industry.

However, as it is still being researched and has produced conflicting results, a consistent and reliable answer to how dependent electrolysis efficiency is on the properties of an electrical pulse has not been determined, hence, other forms of electrolysis such as polymer electrolyte membrane and alkaline water electrolysis are being used in industry.

Experimental research

With the perspective that the current use of non-renewable fuel sources is a main cause of global environmental problems, hydrogen is being viewed as a possible renewable fuel source replacement. For this to be feasible, the production of hydrogen, through methods such as electrolysis, must be efficient in terms of the energy, cost and time required.

Whilst multiple methods of pulse electrolysis have been studied, and experimental results are mixed, the underlying theory behind this experimental approach seems to remain consistent.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377120194 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.