Purging (manufacturing)

Purging is a cleaning process of injection molding to clean thermoplastics molding machines and extruders.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Purging is a cleaning process of injection molding to clean thermoplastics molding machines and extruders. This process is very important as a virgin resin cannot effectively remove previous resin residuals from the previous run.

Method

Below are the major steps for purging- Turn off the material flow in the injection molding machine Turn off the colorant flow which is added or applied in order to change the colour of a material Maintain existing process settings and continue manufacturing plastics parts When last part is completed, set the nozzle retraction mode Clean hopper and colorant blender (whichever necessary) Load any commercial purging material or new material to be used into hopper feed zone Clean nozzle and sprue bushing by making few shots Continue purging until most of the commercial purging material is out of the hopper Feed at least one injection capacity of the next production resin to rinse out any residuals Start the next production with new resin

Text derived from https://en.wikipedia.org/w/index.php?oldid=1177279464 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.