Push processing

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Push processing in photography, sometimes called uprating, refers to a film developing technique that increases the effective sensitivity of the film being processed. Push processing involves developing the film for more time, possibly in combination with a higher temperature, than the manufacturer's recommendations. This technique results in effective overdevelopment of the film, compensating for underexposure in the camera.

Push processing in photography, sometimes called uprating, refers to a film developing technique that increases the effective sensitivity of the film being processed. Push processing involves developing the film for more time, possibly in combination with a higher temperature, than the manufacturer's recommendations. This technique results in effective overdevelopment of the film, compensating for underexposure in the camera.

Visual characteristics

Push processing allows relatively insensitive films to be used under lighting conditions that would ordinarily be too low for adequate exposure at the required shutter speed and aperture combination. This technique alters the visual characteristics of the film, such as higher contrast, increased grain and lower resolution. Saturated and distorted colours are often visible on colour film that has been push processed. Pull processing involves controlled overexposure and underdevelopment, effectively decreasing the sensitivity of the processed film. This technique might be used, for example, with a high-speed film on a bright, sunny day. In processing, it requires some combination of shorter development time and/or at a lower temperature or greater developer dilution. Film that has been pull processed will display the opposite change in visual characteristics. This may be deliberately exploited for artistic effect.

Exposure index

135 color film showing checkboxes that can be used to remember the EI for push-processing (expressed in stops relative to the box speed of ISO 800/30°).]] When a film's effective sensitivity has been varied, the resulting sensitivity is called the exposure index; the film's speed remains at the manufacturer's indication. For example, an ISO 200/24° film could be push processed to EI 400/27° or pull processed to EI 100/21°.

In cinema

Andy Warhol's 1965 8-hour art film Empire, was shot on ASA 400 Tri-X 16mm film stock, which was then push processed to ASA 1000 to compensate for the dark conditions of filming the Empire State Building during the night. John Alcott won an Oscar "for his gorgeous use of natural lighting" in Stanley Kubrick's 1975 period film Barry Lyndon, set in the 18th century, where he succeeded in filming scenes lit only by candlelight through the use of special wide-aperture Carl Zeiss Planar 50mm f/0.7 lenses designed for the low-light shooting on NASA's moon landings, and then push-processing the film stock. Larry Smith, the cinematographer for Kubrick's 1999 film Eyes Wide Shut, used push-processing to increase the intensity of the color. Paul Thomas Anderson and Michael Bauman used this technique on their 35mm film stock for the 2017 film Phantom Thread, also filling its frames with "theatrical haze" to "dirty up" the look of the film.

See also

Film speed Latent image Photographic processing

References

External links

Push/Pull Processing at Kodak

Text derived from https://en.wikipedia.org/w/index.php?oldid=1350503134 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.