Push–pull output

Article summary

s configured as emitter followers A push–pull amplifier is a type of electronic circuit that uses a pair of active devices that alternately supply current to, or absorb current from, a connected load. This kind of amplifier can enhance both the load capacity and switching speed. Push–pull outputs are present in TTL and CMOS digital logic circuits and in some types of amplifiers, and are usually realized by a complementary pair of transistors, one dissipating or sinking current from the load to ground or a negative power supply, and the other supplying or sourcing current to the load from a positive power supply. A push–pull amplifier is more efficient than a single-ended class-A amplifier. The output power that can be achieved is higher than the continuous dissipation rating of either transistor or tube used alone and increases the power available for a given supply voltage. Symmetrical construction of the two sides of the amplifier means that even-order harmonics are cancelled, which can reduce distortion. DC current is cancelled in the output, allowing a smaller output transformer to be used than in a single-ended amplifier. However, the push–pull amplifier requires a phase-splitting component that adds complexity and cost to the system; use of center-tapped transformers for input and output is a common technique but adds weight and restricts performance.…

Key claims

1. release date: 1924 — source: Wikipedia · confidence 0.95

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. The record states that the release date is "1924". What evidence would count against this claim?
3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

1. Wikipedia https://en.wikipedia.org/w/index.php?oldid=1361314048