Lesson plan
Q code
The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication (used e. g. by the Maritime Mobile Service or Amateur Radio Service), later also for TeleTYpe (TTY. e. g. for AFTN, the Aeronautical Fixed Telecommunications Network) and RadioTeleTYpe (RTTY e.g. used by the Maritime Mobile Service or Amateur Radio Service) and in voice communications (e.g. Aeronautical mobile service). Most Q-codes defined in 1947 are still in use today, date back to the International Telecommunication Convention in Atlantic City, 1947 and are standardized in the ITU International Radio Regulations from 1947 (ITU-RR).
Article summary
The Q-code is a standardised collection of three-letter codes that each start with the letter "Q". It is an operating signal initially developed for commercial radiotelegraph communication (used e. g. by the Maritime Mobile Service or Amateur Radio Service), later also for TeleTYpe (TTY. e. g. for AFTN, the Aeronautical Fixed Telecommunications Network) and RadioTeleTYpe (RTTY e.g. used by the Maritime Mobile Service or Amateur Radio Service) and in voice communications (e.g. Aeronautical mobile service). Most Q-codes defined in 1947 are still in use today, date back to the International Telecommunication Convention in Atlantic City, 1947 and are standardized in the ITU International Radio Regulations from 1947 (ITU-RR).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.