Lesson plan
Q10 (temperature coefficient)
The Q 10 temperature coefficient is a mathematical parameter that is thought to come from the late 19th century, in the work of van ’t Hoff. Q 10 is a measure of temperature sensitivity based on chemical reaction rates, and it applies to most physiological processes (e.g., respiration, digestion, photosynthesis). The Q 10 is calculated as: : Q_{10}=\left( \frac{R_2}{R_1} \right )^{10 \,^\circ \mathrm{C}/(T_2-T_1) } where; : R is the rate with a context-dependent unit. : T is the temperature in degrees Celsius or kelvin. Rewriting this equation, the assumption behind Q 10 is that the reaction rate R depends exponentially on temperature: : R_2 = R_1 ~Q_{10}^{(T_2-T_1)/10 \,^{\circ} \mathrm{C}} Q 10 is a unitless quantity, as it is the factor by which a rate changes. In this equation, R 1 represents the rate at the reference temperature T 1 . In environmental sciences, the reference temperature for calculating Q 10 is often chosen to be 0 °C or 10°C. If the reference temperature is 10 °C, Q 10 represents the factor by which the rate is multiplied for each 10°C increase in temperature. For most biological systems, the Q 10 value is ~ 2 to 3 (the rate doubles or triples for every 10 °C increase in temperature).
Article summary
The Q 10 temperature coefficient is a mathematical parameter that is thought to come from the late 19th century, in the work of van ’t Hoff. Q 10 is a measure of temperature sensitivity based on chemical reaction rates, and it applies to most physiological processes (e.g., respiration, digestion, photosynthesis). The Q 10 is calculated as: : Q_{10}=\left( \frac{R_2}{R_1} \right )^{10 \,^\circ \mathrm{C}/(T_2-T_1) } where; : R is the rate with a context-dependent unit. : T is the temperature in degrees Celsius or kelvin. Rewriting this equation, the assumption behind Q 10 is that the reaction rate R depends exponentially on temperature: : R_2 = R_1 ~Q_{10}^{(T_2-T_1)/10 \,^{\circ} \mathrm{C}} Q 10 is a unitless quantity, as it is the factor by which a rate changes. In this equation, R 1 represents the rate at the reference temperature T 1 . In environmental sciences, the reference temperature for calculating Q 10 is often chosen to be 0 °C or 10°C. If the reference temperature is 10 °C, Q 10 represents the factor by which the rate is multiplied for each 10°C increase in temperature. For most biological systems, the Q 10 value is ~ 2 to 3 (the rate doubles or triples for every 10 °C increase in temperature).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.