Lesson plan

QARMAN

QARMAN (QubeSat for Aerothermodynamic Research and Measurements on Ablation) was a technology demonstration CubeSat-type satellite developed by the European Space Agency (ESA) and the von Karman Institute for Fluid Dynamics in Belgium. Its mission was to test various atmospheric reentry-related technologies including an innovative cork-based ablative heat shield. QARMAN was launched aboard the SpaceX Dragon mission CRS-19 in December 2019 and later deployed from the ISS in February 2020. It was expected to slowly drift down over several months, its shuttlecock-like profile increasing its drag and stabilising its orientation, until finally it would reenter the atmosphere in July 2020, testing its heat shield and transmitting data via the Iridium satellites. However, the low solar activity during the beginning of Solar cycle 25 slowed the rate of its orbital decay. On 14 July 2020, the satellite stopped transmitting after experiencing increasing onboard temperatures.

Back to article

Article summary

QARMAN (QubeSat for Aerothermodynamic Research and Measurements on Ablation) was a technology demonstration CubeSat-type satellite developed by the European Space Agency (ESA) and the von Karman Institute for Fluid Dynamics in Belgium. Its mission was to test various atmospheric reentry-related technologies including an innovative cork-based ablative heat shield. QARMAN was launched aboard the SpaceX Dragon mission CRS-19 in December 2019 and later deployed from the ISS in February 2020. It was expected to slowly drift down over several months, its shuttlecock-like profile increasing its drag and stabilising its orientation, until finally it would reenter the atmosphere in July 2020, testing its heat shield and transmitting data via the Iridium satellites. However, the low solar activity during the beginning of Solar cycle 25 slowed the rate of its orbital decay. On 14 July 2020, the satellite stopped transmitting after experiencing increasing onboard temperatures.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.