Lesson plan

QFF

QFF is an Aeronautical Code Q code. It is the MSL pressure derived from local meteorological station conditions in accordance with meteorological practice. This is the altimeter setting that is intended to produce correct altitude indication (i.e., no error) on an altimeter at the actual sea level elevation, while QNH is intended to have no error at the station elevation (or, especially when applied within a region with a relatively small range of surface elevations, at the altitudes close to the surface elevation within the region). Meteorological practice of calculating QFF differs between meteorological organizations around the world. Some examples: * The Australian Bureau of Meteorology method: :: QFF is derived from the barometric pressure at the station location by calculating the weight of an imaginary air column, extending from the location to sea level, assuming the temperature and relative humidity at the location are the long term monthly mean, the temperature lapse rate is according to ISA and the relative humidity lapse rate is zero. :: QFF is the location value plotted on surface synoptic chart and is closer to reality than QNH, though it is only indirectly used in aviation. * Another method : :: The derivation assumes that an isothermal layer at the station temperature extends to the sea level.…

Back to article

Article summary

QFF is an Aeronautical Code Q code. It is the MSL pressure derived from local meteorological station conditions in accordance with meteorological practice. This is the altimeter setting that is intended to produce correct altitude indication (i.e., no error) on an altimeter at the actual sea level elevation, while QNH is intended to have no error at the station elevation (or, especially when applied within a region with a relatively small range of surface elevations, at the altitudes close to the surface elevation within the region). Meteorological practice of calculating QFF differs between meteorological organizations around the world. Some examples: * The Australian Bureau of Meteorology method: :: QFF is derived from the barometric pressure at the station location by calculating the weight of an imaginary air column, extending from the location to sea level, assuming the temperature and relative humidity at the location are the long term monthly mean, the temperature lapse rate is according to ISA and the relative humidity lapse rate is zero. :: QFF is the location value plotted on surface synoptic chart and is closer to reality than QNH, though it is only indirectly used in aviation. * Another method : :: The derivation assumes that an isothermal layer at the station temperature extends to the sea level.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.