Quantum Hall effect
≈ 13 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The quantum Hall effect (or integer quantum Hall effect) is a quantized version of the Hall effect which is observed in two-dimensional electron systems subjected to low temperatures and strong magnetic fields, in which the Hall resistance exhibits steps that take on the quantized values : R_{xy} = \frac{V_\text{Hall}}{I_\text{channel}} = \frac{h}{e^2\nu} , where is the Hall voltage, is the channel current, is the elementary charge and is the Planck constant. The divisor can take on either integer ( ) or fractional ( ) values.
Impact
Here, is roughly but not exactly equal to the filling factor of Landau levels. The quantum Hall effect is referred to as the integer or fractional quantum Hall effect depending on whether is an integer or fraction, respectively. The striking feature of the integer quantum Hall effect is the persistence of the quantization (i.e. the Hall plateau) as the electron density is varied.
Since the electron density remains constant when the Fermi level is in a clean spectral gap, this situation corresponds to one where the Fermi level is an energy with a finite density of states, though these states are localized (see Anderson localization). The fractional quantum Hall effect is a more complicated state whose existence relies fundamentally on electron–electron interactions. In 1988, it was proposed that there was a quantum Hall effect without Landau levels.…
The quantum Hall effect (or integer quantum Hall effect) is a quantized version of the Hall effect which is observed in two-dimensional electron systems subjected to low temperatures and strong magnetic fields, in which the Hall resistance exhibits steps that take on the quantized values R_{xy} = \frac{V_\text{Hall}}{I_\text{channel}} = \frac{h}{e^2\nu} , where is the Hall voltage, is the channel current, is the elementary charge and is the Planck constant. The divisor can take on either integer ( ) or fractional ( ) values.
Here, is roughly but not exactly equal to the filling factor of Landau levels. The quantum Hall effect is referred to as the integer or fractional quantum Hall effect depending on whether is an integer or fraction, respectively. The striking feature of the integer quantum Hall effect is the persistence of the quantization (i.e. the Hall plateau) as the electron density is varied.
Since the electron density remains constant when the Fermi level is in a clean spectral gap, this situation corresponds to one where the Fermi level is an energy with a finite density of states, though these states are localized (see Anderson localization). The fractional quantum Hall effect is a more complicated state whose existence relies fundamentally on electron–electron interactions. In 1988, it was proposed that there was a quantum Hall effect without Landau levels.
This quantum Hall effect is referred to as the quantum anomalous Hall (QAH) effect. There is also a new concept of the quantum spin Hall effect which is an analogue of the quantum Hall effect, where spin currents flow instead of charge currents. The quantization of the Hall conductance ( G_{xy}= 1/R_{xy} ) has the important property of being exceedingly precise. Actual measurements of the Hall conductance have been found to be integer or fractional multiples of e^2/h to better than one part in a billion.
It has allowed for the definition of a new practical standard for electrical resistance, based on the resistance quantum given by the von Klitzing constant . This is named after Klaus von Klitzing, the discoverer of exact quantization. The quantum Hall effect also provides an extremely precise independent determination of the fine-structure constant, a quantity of fundamental importance in quantum electrodynamics. In 1990, a fixed conventional value was defined for use in resistance calibrations worldwide.
Later, the 2019 revision of the SI fixed exact values of and , resulting in an exact Since the system is subjected to a magnetic field, it has to be introduced as an electromagnetic vector potential in the Schrödinger equation. The system considered is an electron gas that is free to move in the x and y directions, but is tightly confined in the z direction. Then, a magnetic field is applied in the z direction and according to the Landau gauge the electromagnetic vector potential is \mathbf{A} = (0, Bx, 0) and the scalar potential is \phi=0 .
Thus the Schrödinger equation for a particle of charge q and effective mass m^* in this system is: \left \{ \frac{1}{2m^*} \left [ \mathbf{p}-q\mathbf{A}\right ]^2 + V(z) \right \}\psi(x,y,z)=\varepsilon\psi(x,y,z) where \mathbf{p} is the canonical momentum, which is replaced by the operator -i\hbar\nabla and \varepsilon is the total energy. To solve this equation it is possible to separate it into two equations since the magnetic field just affects the movement along x and y axes.
The total energy becomes then, the sum of two contributions \varepsilon = \varepsilon_z + \varepsilon_{xy} . The corresponding equations in z axis is: \left [- \frac{\hbar^2}{2m^*} {\partial^2\over\partial z^2} + V(z) \right ]u(z)=\varepsilon_zu(z) To simplify things, the solution V(z) is considered as an infinite well. Thus the solutions for the z direction are the energies \varepsilon_z=\frac{n_z^2\pi^2\hbar^2}{2m^*L^2} , n_z=1,2,3... and the wavefunctions are sinusoidal.
For the x and y directions, the solution of the Schrödinger equation can be chosen to be the product of a plane wave in y -direction with some unknown function of x , i.e., \psi_{xy}=u(x)e^{ik_yy} . This is because the vector potential does not depend on y and the momentum operator \hat p_y therefore commutes with the Hamiltonian.
By substituting this Ansatz into the Schrödinger equation one gets the one-dimensional harmonic oscillator equation centered at x_{k_y}=\frac{\hbar k_y}{eB} . \left [- \frac{\hbar^2}{2m^*} {\partial^2\over\partial x^2}+\frac{1}{2}m^*\omega_{\rm c}^2(x-l_B^2k_y)^2\right ]u(x)=\varepsilon_{xy}u(x) where \omega_{\rm c}=\frac{eB}{m^*} is defined as the cyclotron frequency and l_B^2=\frac{\hbar}{eB} the magnetic length. The energies are: \varepsilon_{xy}\equiv\varepsilon_{n_x}=\hbar \omega_{\rm c} \left ( n_x+\frac{1}{2} \right ) , n_x=1,2,3...
And the wavefunctions for the motion in the xy plane are given by the product of a plane wave in y and Hermite polynomials attenuated by the gaussian function in x , which are the wavefunctions of a harmonic oscillator. From the expression for the Landau levels one notices that the energy depends only on n_x , not on k_y . States with the same n_x but different k_y are degenerate. n_{\rm 2D}=\frac{m^*}{\pi \hbar^2} .
As the field is turned on, the density of states collapses from the constant to a Dirac comb, a series of Dirac \delta functions, corresponding to the Landau levels separated \Delta\varepsilon_{xy}=\hbar \omega_{\rm c} . At finite temperature, however, the Landau levels acquire a width \Gamma=\frac{\hbar}{\tau_i} being \tau_i the time between scattering events. Commonly it is assumed that the precise shape of Landau levels is a Gaussian or Lorentzian profile.
Another feature is that the wave functions form parallel strips in the y -direction spaced equally along the x -axis, along the lines of \mathbf{A} . Since there is nothing special about any direction in the xy -plane if the vector potential was differently chosen one should find circular symmetry. Given a sample of dimensions L_x \times L_y and applying the periodic boundary conditions in the y -direction k=\frac{2\pi}{L_y}j , j being an integer, one gets that each parabolic potential is placed at a value x_k=l_B^2k .
The number of states for each Landau Level and k can be calculated from the ratio between the total magnetic flux that passes through the sample and the magnetic flux corresponding to a state. N_B=\frac{\phi}{\phi_0}=\frac{BA}{BL_y\Delta x_k}=\frac{A}{2\pi l_B^2}\begin{array}{lcr}& l_B&\\&=&\\ &&\end{array} \frac{AeB}{2\pi \hbar}\begin{array}{lcr}& \omega_{\rm c}&\\&=&\\ &&\end{array} \frac{m^*\omega_{\rm c}A}{2\pi \hbar} Thus the density of states per unit surface is n_B=\frac{m^*\omega_{\rm c}}{2\pi \hbar} .
Note the dependency of the density of states with the magnetic field. The larger the magnetic field is, the more states are in each Landau level. As a consequence, there is more confinement in the system since fewer energy levels are occupied. Rewriting the last expression as n_B=\frac{\hbar \omega_{\rm c}}{2} \frac{m^*}{\pi \hbar^2} it is clear that each Landau level contains as many states as in a 2DEG in a \Delta\varepsilon=\hbar \omega_{\rm c} .
Given the fact that electrons are fermions, for each state available in the Landau levels it corresponds to two electrons, one electron with each value for the spin s=\pm\frac{1}{2} . However, if a large magnetic field is applied, the energies split into two levels due to the magnetic moment associated with the alignment of the spin with the magnetic field. The difference in the energies is \Delta E = \pm \frac{1}{2}g\mu_{\rm B}B being g a factor which depends on the material ( g=2 for free electrons) and \mu_{\rm B} the Bohr magneton.
The sign + is taken when the spin is parallel to the field and - when it is antiparallel. This fact called spin splitting implies that the density of states for each level is reduced by a half. Note that \Delta E is proportional to the magnetic field so, the larger the magnetic field is, the more relevant is the split.
In order to get the number of occupied Landau levels, one defines the so-called filling factor \nu as the ratio between the density of states in a 2DEG and the density of states in the Landau levels. \nu=\frac{n_{\rm 2D}}{n_B}=\frac{hn_{\rm 2D}}{eB} In general the filling factor \nu is not an integer. It happens to be an integer when there is an exact number of filled Landau levels. Instead, it becomes a non-integer when the top level is not fully occupied.
In actual experiments, one varies the magnetic field and fixes electron density (and not the Fermi energy!) or varies the electron density and fixes the magnetic field. Both cases correspond to a continuous variation of the filling factor \nu and one cannot expect \nu to be an integer. Since n_B\propto B , by increasing the magnetic field, the Landau levels move up in energy and the number of states in each level grow, so fewer electrons occupy the top level until it becomes empty.
If the magnetic field keeps increasing, eventually, all electrons will be in the lowest Landau level ( \nu ) and this is called the magnetic quantum limit. moves to maintain a constant density of electrons. The fields are in the ratio 2:3:4 and give \nu=4,\frac{8}{3} and 2 . With the conductivity \sigma=\rho^{-1} one finds \sigma= \frac{1}{\det \rho} \begin{pmatrix} \rho_{yy}&-\rho_{xy}\\ -\rho_{yx}&\rho_{xx} \end{pmatrix} \; . If the longitudinal resistivity is zero and transversal is finite, then \det \rho \neq 0 .
Thus both the longitudinal conductivity and resistivity become zero. Instead, when \nu is a half-integer, the Fermi energy is located at the peak of the density distribution of some Landau Level. This means that the resistivity will have a maximum due to increased scattering. This distribution of minimums and maximums corresponds to ¨quantum oscillations¨ called Shubnikov–de Haas oscillations which become more relevant as the magnetic field increases.
Obviously, the height of the peaks are larger as the magnetic field increases since the density of states increases with the field, so there are more carriers which contribute to the resistivity. It is interesting to notice that if the magnetic field is very small, the longitudinal resistivity is a constant which means that the classical result is reached.
From the classical relation of the transverse resistivity \rho_{xy}=\frac{B}{en_{\rm 2D}} and substituting n_{\rm 2D}=\nu \frac{eB}{h} one finds out the quantization of the transverse resistivity and conductivity: \rho_{xy}=\frac{h}{\nu e^2}\Rightarrow \sigma=\nu \frac{e^2}{h} One concludes then, that the transverse resistivity is a multiple of the inverse of the so-called conductance quantum e^2/h if the filling factor is an integer.
In experiments, however, plateaus are observed for whole plateaus of filling values \nu , which indicates that there are in fact electron states between the Landau levels. These states are localized in, for example, impurities of the material where they are trapped in orbits so they can not contribute to the conductivity. That is why the resistivity remains constant in between Landau levels. Again if the magnetic field decreases, one gets the classical result in which the resistivity is proportional to the magnetic field.
I = \frac{\omega e}{2\pi}, and the induced Hall voltage as a difference between the hydrogen nucleus Coulomb potential at the electron orbital point and at infinity: U=V_\text{C}(\infty) - V_\text{C}(r) = 0 - V_\text{C}(r) = \frac{e}{4\pi\epsilon_0 r} One obtains the quantization of the defined Bohr orbit Hall resistance in steps of the von Klitzing constant as R_\text{Bohr}(n) = \frac{U}{I} = n\frac{h}{e^2} which for the Bohr atom is linear but not inverse in the integer n. Zyun F.
Ezawa: Quantum Hall Effects - Field Theoretical Approach and Related Topics. World Scientific, Singapore 2008, Sankar D. Sarma, Aron Pinczuk: Perspectives in Quantum Hall Effects. Wiley-VCH, Weinheim 2004, E. I. Rashba and V. B. Timofeev, Quantum Hall Effect, Sov. Phys. – Semiconductors v. 20, pp. 617–647 (1986).
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369546509 under CC BY-SA 4.0; modifications have been made.