Quantum turbulence

Quantum turbulence is the name given to the turbulent flow – the chaotic motion of a fluid at high flow rates – of quantum fluids, such as superfluids.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 8 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Quantum turbulence is the name given to the turbulent flow – the chaotic motion of a fluid at high flow rates – of quantum fluids, such as superfluids. The idea that a form of turbulence might be possible in a superfluid via the quantized vortex lines was first suggested by Richard Feynman.

The dynamics of quantum fluids are governed by quantum mechanics, rather than classical physics which govern classical (ordinary) fluids. Some examples of quantum fluids include superfluid helium ( 4 He and Cooper pairs of 3 He), Bose–Einstein condensates (BECs), polariton condensates, and nuclear pasta theorized to exist inside neutron stars.

Quantum fluids exist at temperatures below the critical temperature T_\text{c} at which Bose-Einstein condensation takes place. The velocity and density of the fluid can be recovered from the wavefunction \Psi(\mathbf{x},t) by writing it in polar form \Psi(\mathbf{x},t) = |\Psi(\mathbf{x},t)|e^{i\phi(\mathbf{x},t)} , where |\Psi| is the magnitude of \Psi and \phi is the phase.

The velocity of the fluid is then \mathbf{v}(\mathbf{x},t) = (\hbar/m)\nabla \phi , and the number density is . The mass density is related to the number density by , where m is the mass of one boson.

The circulation \Gamma is defined to be the line integral along a simple closed path C within the fluid \Gamma = \oint_C \mathbf{v} \cdot \mathbf{dr} For a simply-connected surface S , Stokes theorem holds, and the circulation vanishes, as the velocity can be expressed as the gradient of the phase. For a multiply-connected surface, the phase difference between an arbitrary initial point on the curve C and the final point (same as initial point as C is closed) must be 2\pi q , where q=0,1,2,\cdots in order for the wavefunction to be single-valued.

This leads to a quantized value for the circulation \Gamma = \frac{\hbar}{m} \oint_C \nabla S \cdot \mathbf{dr} = q\kappa where \kappa = h/m is the quantum of circulation, and the integer q is the charge (or winding number) of the vortex. Multiply charged vortices ( q>1 ) in helium II are unstable and for this reason in most practical applications .

It is energetically favourable for the fluid to form q singly-charged vortices rather than a single vortex of charge q , and so a multiply-charged vortex would split into singly-charged vortices. Under certain conditions, it is possible to generate certain vortices with a charge higher than 1. Vortex lines are topological line defects of the phase.

Their nucleation makes the quantum fluid's region to become a multiply-connected region. As given by Fig 2, density depletion can be observed near the axis, with \rho = 0 on the vortex line. The size of the vortex core varies between different quantum fluids.

The size of the vortex core is around a_0 = 10^{-10}~\text{m} for helium II, a_0 = 10^{-8}~\text{m} for 3 He–B and for typical atomic condensates . The simplest vortex system in a quantum fluid consists of a single straight vortex line; the velocity field of such configuration is purely azimuthal given by .

This is the same formula as for a classical vortex line solution of the Euler equations, however, classically, this model is physically unrealistic as the velocity diverges as . This leads to the idea of the Rankine vortex as shown in fig 2, which combines solid body rotation for small r and vortex motion for large values of , and is a more realistic model of ordinary classical vortices.

Many similarities can be drawn with vortices in classical fluids, for example the fact that vortex lines obey the classical Kelvin circulation theorem: the circulation is conserved and the vortex lines must terminate at boundaries or exist in the shape of closed loops. In the zero temperature limit, a point on a vortex line will travel accordingly to the velocity field that is generated at that point by the other parts of the vortex line, provided that the vortex line is not straight (an isolated straight vortex does not move).

The velocity can also be generated by any other vortex lines in the fluid, a phenomenon also present in classical fluids. A simple example of this is a vortex ring (a torus-shaped vortex) which moves at a self-induced velocity v_R inversely proportional to the radius of the ring R , where .

The whole ring moves at a velocity v_R = \frac{\kappa}{4\pi R}\left[\ln{\left(\frac{8R}{a_0}\right)} - \frac{1}{2}\right] Here k=2\pi/\lambda where \lambda is the wavelength and k is the wave vector. Travelling vortices in quantum fluids can interact with each other, resulting in reconnections of vortex lines and ultimately changing the topology of the vortex configuration when they collide as suggested by Richard Feynman.

At non-zero temperatures the vortex lines scatter thermal excitations, which creates a friction force with the normal fluid component (thermal cloud for atomic condensates). This phenomenon leads to the dissipation of kinetic energy. For example, vortex rings will shrink, and Kelvin waves will decrease in amplitude.

Vortex lattices are laminar (ordered) configurations of vortex lines that can be created by rotating the system. For a cylindrical vessel of radius R , a condition can be derived for the formation of a vortex lattice by minimising the expression F' = F - \mathbf{L}_v\cdot\mathbf{\Omega} , where F is the free energy, \mathbf{L}_v is the angular momentum of the fluid and \mathbf{\Omega} is the rotation, with magnitude \Omega and axial direction.

The critical velocity for the appearance of a vortex lattice is then \Omega^1_\text{c} = \frac{\kappa}{R^2}\ln{\left(\frac{R}{a_0}\right)} . Exceeding this velocity allows for a vortex to form in the fluid. States with more vortices can be formed by increasing the rotation further, past the next critical velocities \Omega_\text{c}^2,\,\Omega_\text{c}^3, \cdots .

The vortices arrange themselves into ordered configurations that are called vortex lattices. \frac{\partial \rho}{\partial t} + \nabla \cdot (\rho_\text{s} \mathbf{v}_\text{s} + \rho_\text{n} \mathbf{v}_\text{n}) = 0 \frac{\partial(\rho S)}{\partial t} + \nabla \cdot (\rho S \mathbf{v}_\text{n}) = 0 \rho_\text{s}\left[ \frac{\partial \mathbf{v}_\text{s}}{\partial t} + (\mathbf{v}_\text{s} \cdot \nabla)\mathbf{v}_\text{s}\right] = -\frac{\rho_\text{s}}{\rho}\nabla P + \rho_\text{s} S \nabla T \rho_\text{n}\left[ \frac{\partial \mathbf{v}_\text{n}}{\partial t} + (\mathbf{v}_\text{n} \cdot \nabla)\mathbf{v}_\text{n}\right] = -\frac{\rho_\text{n}}{\rho}\nabla P - \rho_\text{s} S \nabla T + \mu \nabla^2 \mathbf{v}_\text{n} where P is the pressure, S is the entropy per unit mass and \mu is the viscosity of the normal fluid component as given by the table above. The first of these equations can be identified as being the conservation of mass equation, while the second equation can be identified as the conservation of entropy.

The results of these equations give rise to the phenomena of second sound and thermal counterflow. At large velocities the superfluid becomes turbulent and vortex lines appear; at even larger velocities both normal fluid and superfluid become turbulent.

E_\text{tot} = \frac{1}{\mathcal{V}}\int_{\mathcal{V}}\frac{\mathbf{v}^2}{2}\, \mathrm{d}^3\mathbf{r} E(k) = C \varepsilon^{\frac{2}{3}}k^{-\frac{5}{3}} where \varepsilon is the energy dissipation rate per unit volume -\mathrm{d}E/\mathrm{d}t . The constant C is a dimensionless constant, that takes the value . In k-space the value associated to the Kolmogorov length scale is the Kolmogorov wavenumber , where viscous dissipation occurs.

Applying a heat flux (also termed the "thermal counterflow" ): the prototype experiment is a channel which is open to a helium bath at one end and the opposite is closed and has a resistor. An electric current is passed through the resistor and generates ohmic heat; the heat is carried away from the heater towards the bath by the normal fluid component, while the superfluid moves towards the heater so that the net mass flux is zero as the channel is closed.

A relative velocity v_\text{ns} = |v_\text{n} - v_\text{s}| (counterflow) of the two fluid components is set up in this way which is proportional to the applied heat. Above a small critical value of the counterflow velocity, a turbulent vortex tangle is generated.

Injecting vortex rings (rings are generated by injecting electrons which form a small bubble of about 16 angstroms in size that are accelerated by an electric field, until, upon exceeding the critical velocity, the vortex ring is nucleated) In helium II techniques exists to measure the vortex line density L (the length of vortex lines per unit volume based on detecting the second sound attenuation. The average distance between vortex lines, \ell , can be found in terms of the vortex line density as \ell = 1/\sqrt{L} .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372014116 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001372014116 · captured 1788030738.0 · version history

Cite this page as: encyclopegia.org, “Quantum turbulence”, snapshot enwiki-001372014116. https://encyclopegia.org/a/quantum-turbulence

Sources cited in this revision

35 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.