Quern-stone
stone i women using quern-stones to grind grains A quern-stone is a stone tool for hand-grinding a wide variety of materials, especially for various types of grains.
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
stone i women using quern-stones to grind grains A quern-stone is a stone tool for hand-grinding a wide variety of materials, especially for various types of grains. They are used in pairs. The lower stationary stone of early examples is called a saddle quern, while the upper mobile stone is called a muller, rubber, or handstone.
The upper stone was moved in a back-and-forth motion across the saddle quern. Later querns are known as rotary querns. The central hole of a rotary quern is called the eye, and a dish in the upper surface is known as the hopper.
A handle slot contained a handle which enabled the rotary quern to be rotated. They were first used in the Neolithic era to grind cereals into flour.
stone]] i women using quern-stones to grind grains]] A quern-stone is a stone tool for hand-grinding a wide variety of materials, especially for various types of grains. They are used in pairs. The lower stationary stone of early examples is called a saddle quern, while the upper mobile stone is called a muller, rubber, or handstone.
The upper stone was moved in a back-and-forth motion across the saddle quern. Later querns are known as rotary querns. The central hole of a rotary quern is called the eye, and a dish in the upper surface is known as the hopper.
A handle slot contained a handle which enabled the rotary quern to be rotated. They were first used in the Neolithic era to grind cereals into flour.
Saddle quern
The saddle quern is produced by rocking or rolling the muller using parallel motions (i.e., pushing and pulling the handstone), which forms a shape looking like a saddle. These are the most ancient and widely used type of quern-stone and in northern Britain were superseded around the 5th to the 4th century BC by the more efficient rotary quern.
The handstones for saddle querns are generally either roughly cylindrical (not unlike a rolling pin) and used with both hands, or rough hemispheres and used with one hand. This provides a crushing motion, not a grinding action and is more suitable for crushing malted grain. It is not easy to produce flour from a saddle quern with unmalted grain.
The muller is also referred to as a 'rubber' or 'mouler'.
Rotary quern
Museum, Dumfries and Galloway, southern Scotland]] of the woman on the right, possibly to catch grain; she feeds the stone with grain from the bowl at her left. ]] As the name implies, the rotary quern used circular motions to grind the material, meaning both the upper and lower quern were generally circular. The handstone of a rotary quern is much heavier than that of saddle quern and provides the necessary weight for the grinding of unmalted grain into flour.
In some cases the grinding surfaces of the stones fit into each other, the upper stone being slightly concave and the lower one convex. Rotary querns may have been in use in Scotland as early as the 5th or 4th centuries BC.
Beehive quern: In this type, the upper stone is hemispherical, or bun-shaped, with a central conical hopper to hold the grain that falls down a hole to the grinding surface. It is held in position with a pivot that fits into a central hole in the bottom stone.
The upper stone also has a deep horizontal socket in its steep side in which to place the wooden peg used as a handle to rotate or oscillate the upper stone. This was the earliest type of rotary quern to appear in the British Isles.
It arrived in Britain in the middle of the Iron Age (about 400–300 BC) and spread into the northern half of Ireland, probably from Scotland, some time after the 2nd century BC. Disc quern: Disc querns consist of two flat disc-shaped stones, an upper stone with a cylindrical perforation for containing a handle and a lower stone with a central spindle hole.
The adjustable, discoid rotary quern has larger, flatter and more discoid stones than the beehive type. The lower stone was completely perforated. The long handle rotated in a shallow socket in the upper surface of the upper stone.
This Iron Age type closely resembles the adjustable Highland quern still in use in historic times. In Ireland, disc querns were the dominant type of querns in use between the years 500 CE–1500 CE, and usually had a diameter of 30–60 cm.
Garnett in his 1800 tour of Scotland describes the use of a hand quern as follows: Miniature quern: Under in diameter and varying from roughly dressed to carefully worked, often with vertical handle sockets, a new class of querns has been identified having been overlooked in the past as weights, etc. In all respects they are like full sized quern stones and they show the typical wear signs that indicate that they were used for grinding small amounts of seeds, minerals or herbs. A suggestion that they may have been made as toys is thought to be unlikely.
External links
Atlas of European millstone quarries Saddle quern, other querns, and stone objects at the Khirbet Qeiyafa archaeological site in Israel Demonstration of quern-stone use in Iran, , November 2022.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1371813727 under CC BY-SA 4.0; modifications have been made.