Lesson plan
RA-4 process
RA-4 is Kodak's proprietary name for the chemical process most commonly used to make color photographic prints. It is used for both minilab wet silver halide digital printers common today in photo labs, and for prints made with older-type optical enlargers and manual processing. More specifically, common color photographic paper is carefully exposed to form a latent image of the picture, and then the paper is run through the series of chemicals that together comprise the RA-4 process to convert the latent image into the final print. RA-4 uses Color Developing Agent 3, in combination with color couplers in the emulsion to generate color dyes. RA-4 is a standardized chromogenic process used worldwide to make prints with a variety of equipment, photographic paper, and chemicals. Kodak created the RA-4 process for its color negative photographic papers. Fuji, Agfa, and other present and past photographic supply companies also make or have made both papers that are compatible with the Kodak chemicals, and chemicals that are compatible with the Kodak papers. These other companies typically call their equivalent processes by other names, but to most photographers, RA-4 is used as a generic term. The actual chemical process occurs at 100 degrees F. The steps: 1. The paper (glossy or matte) is taken through color developer; 2. Bleach/fixer bath; 3.…
Article summary
RA-4 is Kodak's proprietary name for the chemical process most commonly used to make color photographic prints. It is used for both minilab wet silver halide digital printers common today in photo labs, and for prints made with older-type optical enlargers and manual processing. More specifically, common color photographic paper is carefully exposed to form a latent image of the picture, and then the paper is run through the series of chemicals that together comprise the RA-4 process to convert the latent image into the final print. RA-4 uses Color Developing Agent 3, in combination with color couplers in the emulsion to generate color dyes. RA-4 is a standardized chromogenic process used worldwide to make prints with a variety of equipment, photographic paper, and chemicals. Kodak created the RA-4 process for its color negative photographic papers. Fuji, Agfa, and other present and past photographic supply companies also make or have made both papers that are compatible with the Kodak chemicals, and chemicals that are compatible with the Kodak papers. These other companies typically call their equivalent processes by other names, but to most photographers, RA-4 is used as a generic term. The actual chemical process occurs at 100 degrees F. The steps: 1. The paper (glossy or matte) is taken through color developer; 2. Bleach/fixer bath; 3.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.