Rachinger correction
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In X-ray diffraction, the Rachinger correction is a method for accounting for the effect of an undesired K-alpha 2 peak in the energy spectrum. Ideally, diffraction measurements are made with X-rays of a single wavelength. Practically, the x-rays for a measurement are usually generated in an X-ray tube from a metal's K-alpha line. This generation creates x-rays at a variety of wavelengths, but most of the non K-alpha X-rays can be blocked from reaching the sample by filters. However, the K-alpha line is actually two x-ray lines close together: the stronger K-alpha 1 peak, and the weaker K-alpha 2 peak. Compared to other radiation such as the Bremsstrahlung, the K-alpha two peak is more difficult to filter mechanically. The Rachinger correction is a recursive method suggested by William Albert Rachinger (1927) to eliminate the disturbing K_{\alpha_2} peak.
In X-ray diffraction, the Rachinger correction is a method for accounting for the effect of an undesired K-alpha 2 peak in the energy spectrum. Ideally, diffraction measurements are made with X-rays of a single wavelength. Practically, the x-rays for a measurement are usually generated in an X-ray tube from a metal's K-alpha line. This generation creates x-rays at a variety of wavelengths, but most of the non K-alpha X-rays can be blocked from reaching the sample by filters.
However, the K-alpha line is actually two x-ray lines close together: the stronger K-alpha 1 peak, and the weaker K-alpha 2 peak. Compared to other radiation such as the Bremsstrahlung, the K-alpha two peak is more difficult to filter mechanically. The Rachinger correction is a recursive method suggested by William Albert Rachinger (1927) to eliminate the disturbing K_{\alpha_2} peak. E = h \frac{c_0}{\lambda} From this, the angular distance can be determined for each diffraction angle \Delta\theta determine the two Kα peaks.
Furthermore, it is known how the intensities of K_{\alpha_1} and K_{\alpha_2} behave in the diffraction pattern. This ratio is determined quantum mechanically and is for all anode materials: r = \frac{I_{\alpha_2}}{I_{\alpha_1}} = 0.5 I(\theta) = I_1(\theta) + I_2(\theta) , where I_1(\theta) is the intensity of the pure K_{\alpha_1} peak and I_2(\theta) the intensity of the pure \alpha_2 peak.
The intensity of K_{\alpha_2} peak can be expressed as: I_2(\theta) = r\cdot I_1(\theta-\Delta\theta) , so the overall intensity is: I(\theta) = I_1(\theta) + r\cdot I_1(\theta-\Delta\theta) To practically perform the Rachinger correction, one starts on a rising edge of a peak. For a certain angle \theta becomes the intensity of the diffraction image I(\theta) take and with r scales with I'(\theta) = r\cdot I(\theta) , at the same time the angle difference becomes te calculated \Delta\theta .
At the point \theta+\Delta\theta can the true intensity I_1 (which, if there is no K_{\alpha_2} peak) would be calculated by: I_1(\theta+\Delta\theta) = I(\theta+\Delta\theta) - I'(\theta) . Since the measured values of X-ray diffraction experiments are usually available as ASCII tables, this procedure can be repeated step by step until the entire diffraction pattern has been run through. Today this method is hardly used anymore. Due to the power of the computers, the K_{\alpha_2} peak can be fit simultaneously.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1220407158 under CC BY-SA 4.0; modifications have been made.