Radial distribution function

Uses your system voice; voice and rate in settings.

Snapshot

≈ 15 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

at \textstyle T^* = 0.71, \; n^* = 0.844 . In statistical mechanics, the radial distribution function, (or pair correlation function) g(r) in a system of particles (atoms, molecules, colloids, etc.), describes how density varies as a function of distance from a reference particle. If a given particle is taken to be at the origin O, and if \rho = N/V is the average number density of particles, then the local time-averaged density at a distance r from O is \rho g(r) . This simplified definition holds for a homogeneous and isotropic system.

A more general case will be considered below. In simplest terms it is a measure of the probability of finding one particle at a distance of r away from a given reference particle, relative to that for an ideal gas. The general algorithm involves determining how many particles are within a distance of r and r+dr away from a particle. This general theme is depicted to the right, where the red particle is our reference particle, and the blue particles are those whose centers are within the circular shell, dotted in orange.

The radial distribution function is usually determined by calculating the distance between all particle pairs and binning them into a histogram. The histogram is then normalized with respect to an ideal gas, where particle histograms are completely uncorrelated.…

Background

at \textstyle T^* = 0.71, \; n^* = 0.844 .]] In statistical mechanics, the radial distribution function, (or pair correlation function) g(r) in a system of particles (atoms, molecules, colloids, etc.), describes how density varies as a function of distance from a reference particle. If a given particle is taken to be at the origin O, and if \rho = N/V is the average number density of particles, then the local time-averaged density at a distance r from O is \rho g(r) . This simplified definition holds for a homogeneous and isotropic system.

A more general case will be considered below. In simplest terms it is a measure of the probability of finding one particle at a distance of r away from a given reference particle, relative to that for an ideal gas. The general algorithm involves determining how many particles are within a distance of r and r+dr away from a particle. This general theme is depicted to the right, where the red particle is our reference particle, and the blue particles are those whose centers are within the circular shell, dotted in orange.

The radial distribution function is usually determined by calculating the distance between all particle pairs and binning them into a histogram. The histogram is then normalized with respect to an ideal gas, where particle histograms are completely uncorrelated. For three dimensions, this normalization is the number density of the system ( \rho ) multiplied by the volume of the spherical shell, which symbolically can be expressed as \rho \, 4\pi r^2 dr .

How it works

Given a potential energy function, the radial distribution function can be computed either via computer simulation methods like the Monte Carlo method, or via the Ornstein–Zernike equation, using approximative closure relations like the Percus–Yevick approximation or the hypernetted-chain theory. It can also be determined experimentally, by radiation scattering techniques or by direct visualization for large enough (micrometer-sized) particles via traditional or confocal microscopy.

The radial distribution function is of fundamental importance since it can be used, using the Kirkwood–Buff solution theory, to link the microscopic details to macroscopic properties. Moreover, by the reversion of the Kirkwood–Buff theory, it is possible to attain the microscopic details of the radial distribution function from the macroscopic properties. The radial distribution function may also be inverted to predict the potential energy function using the Ornstein–Zernike equation or structure-optimized potential refinement.

Consider a system of N particles in a volume V (for an average number density \rho =N/V ) and at a temperature T (let us also define \textstyle \beta = \frac{1}{kT} ; k is the Boltzmann constant). The particle coordinates are \mathbf{r}_{i} , with \textstyle i = 1, \, \ldots, \, N . The potential energy due to the interaction between particles is \textstyle U_{N} (\mathbf{r}_{1}\, \ldots, \, \mathbf{r}_{N}) and we do not consider the case of an externally applied field.

The appropriate averages are taken in the canonical ensemble (N,V,T) , with \textstyle Z_{N} = \int \cdots \int \mathrm{e}^{-\beta U_{N}} \mathrm{d} \mathbf{r}_1 \cdots \mathrm{d} \mathbf{r}_N the configurational integral, taken over all possible combinations of particle positions.

The probability of an elementary configuration, namely finding particle 1 in \textstyle \mathrm{d} \mathbf{r}_1 , particle 2 in \textstyle \mathrm{d} \mathbf{r}_2 , etc. is given by {{NumBlk|:| P^{(N)}(\mathbf{r}_1,\ldots,\mathbf{r}_N ) \, \mathrm{d} \mathbf{r}_1 \cdots \mathrm{d} \mathbf{r}_N = \frac{\mathrm{e}^{-\beta U_{N}}}{Z_N} \, \mathrm{d} \mathbf{r}_1 \cdots \mathrm{d} \mathbf{r}_N\, .| }} The total number of particles is huge, so that P^{(N)} in itself is not very useful.

However, one can also obtain the probability of a reduced configuration, where the positions of only n particles are fixed, in \textstyle \mathbf{r}_{1}\, \ldots, \, \mathbf{r}_{n} , with no constraints on the remaining N-n particles. To this end, one has to integrate ( ) over the remaining coordinates \mathbf{r}_{n+1}\, \ldots, \, \mathbf{r}_{N} : P^{(n)}(\mathbf{r}_1,\ldots,\mathbf{r}_n) =\frac{1}{Z_N} \int \cdots \int \mathrm{e}^{-\beta U_N} \, \mathrm{d}^3 \mathbf{r}_{n+1} \cdots \mathrm{d}^3 \mathbf{r}_N \, .

If the particles are non-interacting, in the sense that the potential energy of each particle does not depend on any of the other particles, U_N(\mathbf{r}_1,\dots,\mathbf{r}_N)=\sum_{i=1}^N U_1(\mathbf{r}_i) , then the partition function factorizes, and the probability of an elementary configuration decomposes with independent arguments to a product of single particle probabilities, \begin{align} Z_N &=\prod_{i=1}^N \int \mathrm{d}^3 \mathbf{r}_{i}e^{-\beta U_1}=Z_1^N\\ P^{(n)}(\mathbf{r}_1,\dots,\mathbf{r}_n)&=P^{(1)}(\mathbf{r}_1)\cdots P^{(1)}(\mathbf{r}_n) \end{align} Note how for non-interacting particles the probability is symmetric in its arguments.

This is not true in general, and the order in which the positions occupy the argument slots of P^{(n)} matters. Given a set of positions, the way that the N particles can occupy those positions is N! The probability that those positions ARE occupied is found by summing over all configurations in which a particle is at each of those locations. This can be done by taking every permutation, \pi , in the symmetric group on N objects, S_N , to write \sum_{\pi\in S_N} P^{(N)}(\mathbf{r}_{\pi (1)},\ldots,\mathbf{r}_{\pi (N)}) .

For fewer positions, we integrate over extraneous arguments, and include a correction factor to prevent overcounting, \begin{align} \rho^{(n)}(\mathbf{r}_1,\ldots,\mathbf{r}_n) &=\frac{1}{(N-n)!}\left(\prod_{i=n+1}^N\int\mathrm{d}^3\mathbf{r}_i\right)\sum_{\pi\in S_N} P^{(N)}(\mathbf{r}_{\pi (1)},\ldots,\mathbf{r}_{\pi (N)}) \\ \end{align} This quantity is called the n-particle density function.

For indistinguishable particles, one could permute all the particle positions, \forall i, \mathbf{r}_i\rightarrow \mathbf{r}_{\pi(i)} , without changing the probability of an elementary configuration, P(\mathbf{r}_{\pi(1)},\dots,\mathbf{r}_{\pi (N)})=P(\mathbf{r}_{1},\dots,\mathbf{r}_{ N}) , so that the n-particle density function reduces to \begin{align} \rho^{(n)}(\mathbf{r}_1,\ldots,\mathbf{r}_n) &=\frac{N!}{(N-n)!}P^{(n)}(\mathbf{r}_1,\ldots,\mathbf{r}_n) \end{align} Integrating the n-particle density gives the permutation factor _NP_n , counting the number of ways one can sequentially pick particles to place at the n positions out of the total N particles.

Now let's turn to how we interpret this functions for different values of n . For n=1 , we have the one-particle density. For a crystal it is a periodic function with sharp maxima at the lattice sites. For a non-interacting gas, it is independent of the position \textstyle \mathbf{r}_1 and equal to the overall number density, \rho , of the system. To see this first note that U_N = 0 in the volume occupied by the gas, and \infty everywhere else.

The partition function in this case is Z_N = \prod_{i=1}^N\int\mathrm{d}^3\mathbf{r}_i \ 1=V^N from which the definition gives the desired result \rho^{(1)}(\mathbf{r}) = \frac{N!}{(N-1)!}\frac{1}{V^N}\prod_{i=2}^N\int\mathrm{d}^3\mathbf{r}_i 1 In fact, for this special case every n-particle density is independent of coordinates, and can be computed explicitly \begin{align} \rho^{(n)}(\mathbf{r}_1,\dots,\mathbf{r}_n) &= \frac{N!}{(N-n)!}\frac{1}{V^N}\prod_{i=n+1}^N\int\mathrm{d}^3\mathbf{r}_i 1\\ &=\frac{N!}{(N-n)!}\frac{1}{V^n} \end{align} For N\gg n , the non-interacting n-particle density is approximately \rho^{(n)}_\text{non-interacting}(\mathbf{r}_1,\dots,\mathbf{r}_N)= \left(1-n(n-1)/2N+\cdots \right)\rho^n\approx \rho^n .

With this in hand, the n-point correlation function g^{(n)} is defined by factoring out the non-interacting contribution , \rho^{(n)}(\mathbf{r}_{1}, \ldots, \, \mathbf{r}_{n}) = \rho^{(n)}_\text{non-interacting}g^{(n)}(\mathbf{r}_{1}\, \ldots, \, \mathbf{r}_{n}) Explicitly, this definition reads \begin{align} g^{(n)}(\mathbf{r}_{1}, \ldots, \, \mathbf{r}_{n}) &=\frac{V^N}{N!}\left(\prod_{i=n+1}^N\frac{1}{V}\!\!\int \!\! \mathrm{d}^3\mathbf{r}_i\right)\frac{1}{Z_N}\sum_{\pi\in S_N} e^{-\beta U(\mathbf{r}_{\pi(1)}, \ldots, \, \mathbf{r}_{\pi(N)})} \end{align} where it is clear that the n-point correlation function is dimensionless.

If the system consists of spherically symmetric particles, g^{(2)}(\mathbf{r}_{1},\mathbf{r}_{2}) depends only on the relative distance between them, \mathbf{r}_{12} = \mathbf{r}_{2} - \mathbf{r}_{1} . We will drop the sub- and superscript: \textstyle g(\mathbf{r})\equiv g^{(2)}(\mathbf{r}_{12}) .

Taking particle 0 as fixed at the origin of the coordinates, \textstyle \rho g(\mathbf{r}) d^3r = \mathrm{d} n (\mathbf{r}) is the average number of particles (among the remaining N-1 ) to be found in the volume \textstyle d^3r around the position \textstyle \mathbf{r} .

We can formally count these particles and take the average via the expression \textstyle \frac{\mathrm{d} n (\mathbf{r})}{d^3r} = \langle \sum_{i \neq 0} \delta ( \mathbf{r} - \mathbf{r}_i) \rangle , with \textstyle \langle \cdot \rangle the ensemble average, yielding: where the second equality requires the equivalence of particles \textstyle 1, \, \ldots, \, N-1 .

The formula above is useful for relating g(\mathbf{r}) to the static structure factor S(\mathbf{q}) , defined by \textstyle S(\mathbf{q}) = \langle \sum_{ij} \mathrm{e}^{-i \mathbf{q} (\mathbf{r}_i - \mathbf{r}_j)} \rangle /N , since we have: \begin{align} S(\mathbf{q}) &= 1 + \frac{1}{N} \langle \sum_{i \neq j} \mathrm{e}^{-i \mathbf{q} (\mathbf{r}_i - \mathbf{r}_j)} \rangle = 1 + \frac{1}{N} \left \langle \int_V \mathrm{d} \mathbf{r} \, \mathrm{e}^{-i \mathbf{q} \mathbf{r}} \sum_{i \neq j} \delta \left [ \mathbf{r} - (\mathbf{r}_i - \mathbf{r}_j) \right ] \right \rangle \\ &= 1+ \frac{N(N-1)}{N} \int_V \mathrm{d} \mathbf{r}\, \mathrm{e}^{-i \mathbf{q} \mathbf{r}} \left \langle \delta ( \mathbf{r} - \mathbf{r}_1 ) \right \rangle , \end{align} and thus: S(\mathbf{q}) = 1 + \rho \int_V \mathrm{d} \mathbf{r} \, \mathrm{e}^{-i \mathbf{q} \mathbf{r}} g(\mathbf{r}) , proving the Fourier relation alluded to above.

This equation is only valid in the sense of distributions, since g(\mathbf{r}) is not normalized: \textstyle \lim_{r \rightarrow \infty} g(\mathbf{r}) = 1 , so that \textstyle \int_V \mathrm{d} \mathbf{r} g(\mathbf{r}) diverges as the volume V , leading to a Dirac peak at the origin for the structure factor.

Since this contribution is inaccessible experimentally we can subtract it from the equation above and redefine the structure factor as a regular function: S'(\mathbf{q}) = S(\mathbf{q}) - \rho \delta (\mathbf{q})= 1 + \rho \int_V \mathrm{d} \mathbf{r} \, \mathrm{e}^{-i \mathbf{q}\mathbf{r}} [g(\mathbf{r}) - 1] .

Finally, we rename S(\mathbf{q}) \equiv S'(\mathbf{q}) and, if the system is a liquid, we can invoke its isotropy: {{NumBlk|:| S(q) = 1 + \rho \int_V \mathrm{d} \mathbf{r} \, \mathrm{e}^{-i \mathbf{q}\mathbf{r}} [g(r) - 1] = 1 + 4\pi\rho\frac{1}{q} \int \mathrm{d} r \, r\, \mathrm{sin}(qr) [g(r) - 1] .| }} Evaluating ( ) in q=0 and using the relation between the isothermal compressibility \textstyle \chi _T and the structure factor at the origin yields the compressibility equation: {{NumBlk|:| g(r) = \exp \left [ -\frac{w^{(2)}(r)}{kT} \right ] .| }}In the dilute limit, the potential of mean force is the exact pair potential under which the equilibrium point configuration has a given g(r) .

If the particles interact via identical pairwise potentials: \textstyle U_{N} = \sum_{i > j = 1}^N u(\left | \mathbf{r}_i - \mathbf{r}_j \right |) , the average internal energy per particle is: {{NumBlk|:| \frac{\left \langle E \right \rangle}{N} = \frac{3}{2} kT + \frac{\left \langle U_{N} \right \rangle}{N} = \frac{3}{2} kT + \frac{\rho}{2}\int_V \mathrm{d} \mathbf{r} \, u(r)g(r, \rho, T) .| }} {{NumBlk|:| p = \rho kT - \frac{\rho^2}{6} \int_V \mathrm{d} \mathbf{r} \, r g(r, \rho, T) \frac{\mathrm{d} u(r)}{\mathrm{d} r} .| }} PE=\frac{N}{2}4\pi\rho\int^{\infty}_0r^2u(r)g(r)dr , where N is the number of particles in the system, \rho is the number density, u(r) is the pair potential.

The pressure of the system can also be calculated by relating the 2nd virial coefficient to g(r) . The pressure can be calculated as follows: P = \rho kT-\frac{2}{3}\pi\rho^2\int_{0}^{\infty}dr\frac{du(r)}{dr}r^3g(r) . Note that the results of potential energy and pressure will not be as accurate as directly calculating these properties because of the averaging involved with the calculation of g(r) .

Impact

If u(r) were zero for all r – i.e., if the particles did not exert any influence on each other, then g(r) = 1 for all \mathbf{r} and the mean local density would be equal to the mean density \rho : the presence of a particle at O would not influence the particle distribution around it and the gas would be ideal. For distances r such that u(r) is significant, the mean local density will differ from the mean density \rho , depending on the sign of u(r) (higher for negative interaction energy and lower for positive u(r) ).

As the density of the gas increases, the low-density limit becomes less and less accurate since a particle situated in \mathbf{r} experiences not only the interaction with the particle at O but also with the other neighbours, themselves influenced by the reference particle.

This mediated interaction increases with the density, since there are more neighbours to interact with: it makes physical sense to write a density expansion of g(r) , which resembles the virial equation: This similarity is not accidental; indeed, substituting ( ) in the relations above for the thermodynamic parameters (Equations , and ) yields the corresponding virial expansions. The auxiliary function y(r) is known as the cavity distribution function.

Evidence and sources

It has been shown that for classical fluids at a fixed density and a fixed positive temperature, the effective pair potential that generates a given g(r) under equilibrium is unique up to an additive constant, if it exists. In recent years, some attention has been given to develop pair correlation functions for spatially-discrete data such as lattices or networks.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1352786107 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.