Radian
≈ 8 min read
Names in other languages
- afRadian
- anRadian
- astRadian
- DeutschRadian
- EnglishRadian
- EspañolRadian
- FrançaisRadian
- ItalianoRadian
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The radian, denoted by the symbol rad, is the dimensionless unit of angle in the International System of Units (SI) and is the standard unit of angular measure used in many areas of mathematics. It is defined such that one radian is the angle subtended at the center of a plane circle by an arc that is equal in length to the radius. The unit is defined in the SI as the coherent unit for plane angle, as well as for phase angle. Angles without explicitly specified units are generally assumed to be measured in radians, especially in mathematical writing.
The radian, denoted by the symbol rad, is the dimensionless unit of angle in the International System of Units (SI) and is the standard unit of angular measure used in many areas of mathematics. It is defined such that one radian is the angle subtended at the center of a plane circle by an arc that is equal in length to the radius. The unit is defined in the SI as the coherent unit for plane angle, as well as for phase angle. Angles without explicitly specified units are generally assumed to be measured in radians, especially in mathematical writing. The angle corresponding to one complete revolution is the length of the circumference divided by the radius, which is , or . Thus, radians is equal to 360 degrees. The relation can be derived using the formula for arc length, {{tmath|1= \textstyle \ell_{\text{arc} }=2\pi r\left(\tfrac{\theta}{360^{\circ} }\right) }}. Since radian is the measure of an angle that is subtended by an arc of a length equal to the radius of the circle, {{tmath|1= \textstyle 1=2\pi\left(\tfrac{1\text{ rad} }{360^{\circ} }\right) }}. This can be further simplified to {{tmath|1= \textstyle 1=\tfrac{2\pi\text{ rad} }{360^{\circ} } }}. Multiplying both sides by gives . Plane angle may be defined as , where is the magnitude in radians of the subtended angle, is circular arc length, and is radius. One radian corresponds to the angle for which , hence . However, is only to be used to express angles, not to express ratios of lengths in general. A similar calculation using the area of a circular sector gives 1 radian as 1 m 2 /m 2 = 1. The key fact is that the radian is a dimensionless unit equal to 1. In SI 2019, the SI radian is defined accordingly as . It is a long-established practice in mathematics and across all areas of science to make use of . Giacomo Prando writes "the current state of affairs leads inevitably to ghostly appearances and disappearances of the radian in the dimensional analysis of physical equations". For example, an object hanging by a string from a pulley will rise or drop by centimetres, where is the magnitude of the radius of the pulley in centimetres and is the magnitude of the angle through which the pulley turns in radians. When multiplying by , the unit radian does not appear in the product, nor does the unit centimetre—because both factors are magnitudes (numbers). Similarly in the formula for the angular velocity of a rolling wheel, , radians appear in the units of but not on the right hand side. Anthony French calls this phenomenon "a perennial problem in the teaching of mechanics". Oberhofer says that the typical advice of ignoring radians during dimensional analysis and adding or removing radians in units according to convention and contextual knowledge is "pedagogically unsatisfying". In 1993 the American Association of Physics Teachers Metric Committee specified that the radian should explicitly appear in quantities only when different numerical values would be obtained when other angle measures were used, such as in the quantities of angle measure (rad), angular speed (rad/s), angular acceleration (rad/s 2 ), and torsional stiffness (N⋅m/rad), and not in the quantities of torque (N⋅m) and angular momentum (kg⋅m 2 /s). At least a dozen scientists between 1936 and 2022 have made proposals to treat the radian as a base unit of measurement for a base quantity (and dimension) of "plane angle". Quincey's review of proposals outlines two classes of proposal. The first option changes the unit of a radius to meters per radian, but this is incompatible with dimensional analysis for the area of a circle, . The other option is to introduce a dimensional constant. According to Quincey this approach is "logically rigorous" compared to SI, but requires "the modification of many familiar mathematical and physical equations". A dimensional constant for angle is "rather strange" and the difficulty of modifying equations to add the dimensional constant is likely to preclude widespread use. In particular, Quincey identifies Torrens' proposal to introduce a constant equal to 1 inverse radian (1 rad −1 ) in a fashion similar to the introduction of the constant ε 0 . With this change the formula for the angle subtended at the center of a circle, , is modified to become , and the Taylor series for the sine of an angle becomes: \operatorname{Sin} \theta = \sin \ x = x - \frac{x^3}{3!} + \frac{x^5}{5!} - \frac{x^7}{7!} + \cdots = \eta \theta - \frac{(\eta \theta)^3}{3!} + \frac{(\eta \theta)^5}{5!} - \frac{(\eta \theta)^7}{7!} + \cdots , where x = \eta \theta = \theta/\text{rad} is the angle in radians. The capitalized function is the "complete" function that takes an argument with a dimension of angle and is independent of the units expressed, while is the traditional function on pure numbers which assumes its argument is a dimensionless number in radians. The capitalised symbol \operatorname{Sin} can be denoted \sin if it is clear that the complete form is meant. Current SI can be considered relative to this framework as a natural unit system where the equation is assumed to hold, or similarly, . This radian convention allows the omission of in mathematical formulas. Defining radian as a base unit may be useful for software, where the disadvantage of longer equations is minimal. For example, the Boost units library defines angle units with a plane_angle dimension, and Mathematica's unit system similarly considers angles to have an angle dimension. \text{angle in degrees} = \text{angle in radians} \cdot \frac {180^\circ} {\pi} For example: 1 \text{ rad} = 1 \cdot \frac {180^\circ} {\pi} \approx 57.2958^\circ 2.5 \text{ rad} = 2.5 \cdot \frac {180^\circ} {\pi} \approx 143.2394^\circ \frac {\pi} {3} \text{ rad} = \frac {\pi} {3} \cdot \frac {180^\circ} {\pi} = 60^\circ Conversely, to convert from degrees to radians, multiply by {\pi}/{180} \text{ rad} . \text{angle in radians} = \text{angle in degrees} \cdot \frac {\pi} {180} \text{ rad} For example: 1^\circ = 1 \cdot \frac {\pi} {180} \text{ rad}\approx 0.0175 \text{ rad} 23^\circ = 23 \cdot \frac {\pi} {180} \text{ rad}\approx 0.4014 \text{ rad} Radians can be converted to turns (one turn is the angle corresponding to a revolution) by dividing the number of radians by 2 . 1.2 \text{ rad} = 1.2 \cdot \frac {200^\text{g}} {\pi} \approx 76.3944^\text{g} 50^\text{g} = 50 \cdot \frac {\pi} {200} \text{ rad}\approx 0.7854 \text{ rad} \lim_{h\rightarrow 0}\frac{\sin h}{h}=1, which is the basis of many other identities in mathematics, including \frac{d}{dx} \sin x = \cos x \frac{d^2}{dx^2} \sin x = -\sin x. Because of these and other properties, the trigonometric functions appear in solutions to mathematical problems that are not obviously related to the functions' geometrical meanings (for example, the solutions to the differential equation , the evaluation of the integral , and so on). In all such cases, it is appropriate that the arguments of the functions are treated as (dimensionless) numbers—without any reference to angles. The trigonometric functions of angles also have simple and elegant series expansions when radians are used. For example, when is the angle expressed in radians, the Taylor series for becomes: \sin x = x - \frac{x^3}{3!} + \frac{x^5}{5!} - \frac{x^7}{7!} + \cdots . If were the angle but expressed in degrees, i.e. , then the series would contain messy factors involving powers of : \sin y = \frac{\pi}{180} x - \left (\frac{\pi}{180} \right )^3\ \frac{x^3}{3!} + \left (\frac{\pi}{180} \right )^5\ \frac{x^5}{5!} - \left (\frac{\pi}{180} \right )^7\ \frac{x^7}{7!} + \cdots . In a similar spirit, if angles are involved, mathematically important relationships between the sine and cosine functions and the exponential function (see, for example, Euler's formula) can be elegantly stated when the functions' arguments are angles expressed in radians (and messy otherwise). More generally, in complex-number theory, the arguments of these functions are (dimensionless, possibly complex) numbers—without any reference to physical angles at all.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377640454 under CC BY-SA 4.0; modifications have been made.