Railgrinder

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

railgrinder is used on the Straßenbahn Berlin. The inscription means "We grind tracks quiet". A railgrinder (or rail grinder) is a maintenance of way vehicle or train used to restore the profile and remove irregularities from worn tracks to extend its life and to improve the ride of trains using the track. Rail grinders were developed to increase the lifespan of the tracks being serviced for rail corrugation. Rail grinding is a process that is done to stop the deformation due to use and friction on railroad tracks by removing deformations and corrosion.

Railway tracks that experience continual use are more likely to experience corrugation and overall wear. Rail grinders are used to grind the tracks when rail corrugation is present, or before corrugation begins to form on the tracks. Major freight train tracks use rail grinders for track maintenance based on the interval of tonnage, rather than time. Transit systems and subways in major cities continue to use scheduled rail grinding processes to combat the corrugation common to heavily used tracks.

Rail-grinding equipment may be mounted on a single self-propelled vehicle or on a dedicated rail-grinding train which, when used on an extensive network, may include crew quarters. The grinding wheels, of which there may be more than 100, are set at controlled angles to restore the track to its correct profile.…

railgrinder is used on the Straßenbahn Berlin. The inscription means "We grind tracks quiet".]] A railgrinder (or rail grinder) is a maintenance of way vehicle or train used to restore the profile and remove irregularities from worn tracks to extend its life and to improve the ride of trains using the track. Rail grinders were developed to increase the lifespan of the tracks being serviced for rail corrugation.

Rail grinding is a process that is done to stop the deformation due to use and friction on railroad tracks by removing deformations and corrosion. Railway tracks that experience continual use are more likely to experience corrugation and overall wear. Rail grinders are used to grind the tracks when rail corrugation is present, or before corrugation begins to form on the tracks. Major freight train tracks use rail grinders for track maintenance based on the interval of tonnage, rather than time.

Transit systems and subways in major cities continue to use scheduled rail grinding processes to combat the corrugation common to heavily used tracks. Rail-grinding equipment may be mounted on a single self-propelled vehicle or on a dedicated rail-grinding train which, when used on an extensive network, may include crew quarters. The grinding wheels, of which there may be more than 100, are set at controlled angles to restore the track to its correct profile. The machines have been in use in North America and Europe since the early 20th century.

They are made by specialist rail maintenance companies who may also operate them under contract. The early 2000s saw several advancements in rail maintenance technology, most notably the introduction of track reprofiling by rail milling trains for which advantages in accuracy of the profile and quality of the processed surface are claimed. A second technology that is gaining widespread acceptance in Europe, Germany in particular, is high-speed grinding.

While it cannot reprofile rails like milling or other grinding trains, its working speed of approximately 80 km/h allows defect removal and prevention to be achieved with little or no impact on other scheduled traffic. , Israel]]

Rail corrugation

Rail corrugation or roaring rails is a type of track wear that develops from track and train wheel set contact over time. Once this process has started, it will begin to grow exponentially worse as time progresses. The wear that develops due to the wheel set contact between railways takes its form in the many troughs and crests it leaves behind over time, which may or may not develop into rail corrugation, depending on the circumstances. Rails that are heavily used and put under continual and constant wear will develop rail corrugation.

Rail corrugation is represented in wavelength. Typically, heavily corrugated rails experience a concave deformation on the top of the railroad track in 20 mm to 200 mm intervals. Significant rail corrugation can decrease the service life of tracks and make the replacement of the affected track necessary. Rail corrugation is caused by the friction between the rail and the train wheels tangentially, vertically, and axially. Wear corrugation is a result of friction on the lower rail, which comes in contact with the train wheel.

Excessive corrugation can be identified by the wavelength found on the higher, or outer, rail. Rail corrugation may be limited or lessened with the use of heat treated or alloyed rails, as opposed to the traditional carbon composite rail. The estimated tendency for wear is calculated by taking into account fluctuations in track and wheel set contact which causes the amount of wear to vary. The dynamic properties of different lines of the track can lead to varied degrees of rail corrugation through the use of high-speed wheel sets.

In a study of high-speed railroad tracks, four types of tracks were studied for their tendency to develop corrugation (RHEDA 200, AFTRAV, STEDEF, and high performance ballasted track) and of the four considered the ballasted track was the one least prone to rail corrugation with the AFTRAV track being the second most reliable as well.

Causes

It is generally accepted that a few distinct causes lie behind different wavelengths of railroad corrugation. One study indicates that the specific short-wave railroad deformity is mainly caused by pinned-pinned resonance, in which the rail vibrates as a fixed beam, as if pinned between periodically placed sleepers. The dynamic train-track interaction that causes fixed frequency vibrations at high speeds, commonly observed in light load metro operations, and the anti-resonance caused by the pinning of the rails on sleepers, causes deformation and the "roaring" corrugation of the rails.

References

External links

Research program in the European Union, 2002-2006

Text derived from https://en.wikipedia.org/w/index.php?oldid=1322201400 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001322201400 · captured 1763157259.0 · version history

Cite this page as: encyclopegia.org, “Railgrinder”, snapshot enwiki-001322201400. https://encyclopegia.org/a/railgrinder

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.