Railroad switch

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

) used in the 1895-built Dresden Funicular Railway (photo of 1985) A railroad switch (AE), turnout, or (set of) points (CE) is a mechanical installation enabling railway trains to be guided from one track to another, such as at a railway junction or where a spur or siding branches off.

) used in the 1895-built Dresden Funicular Railway (photo of 1985) A railroad switch (AE), turnout, or (set of) points (CE) is a mechanical installation enabling railway trains to be guided from one track to another, such as at a railway junction or where a spur or siding branches off.

Design

The parts of a turnout are known by different names in different jurisdictions. The main terms in US and UK usage are shown in the selectable diagrams. In this article, the US term is listed first and UK second, in parentheses. The most common type of switch consists of a pair of linked tapering rails, known as points (switch rails or point blades), lying between the diverging outer rails (the stock rails).

These points can be moved laterally into one of two positions to direct a train coming from the point blades toward the straight path or the diverging path. A train moving from the narrow end toward the point blades (i.e. it will be directed to one of the two paths, depending on the position of the points) is said to be executing a facing-point movement.

For many types of switch, a train coming from either of the converging directions will pass through the switch regardless of the position of the points, as the vehicle's wheels will force the points to move. Passage through a switch in this direction is known as a trailing-point movement and switches that allow this type of movement without damage to the mechanism are called trailable switches.

In turn, these can either be non-resettable or resettable, meaning they either require on-site intervention to return the switch to operation after a trailing point movement or can continue operating with no in-person actions. A switch generally has a straight "through" track, such as the mainline, and a diverging route – respectively termed "normal" and "reverse" routes. The handedness of the installation is described by the side that the diverging track leaves.

Right-hand switches have a diverging path to the right of the straight track, when coming from the point blades (switch blades), and a left-handed switch has the diverging track leaving to the opposite side. In many cases, such as rail yards, many switches can be found in a short section of track, sometimes with switches going both to the right and left (although it is better to keep these separated as much as feasible).

Sometimes a switch merely divides one track into two; at others, it serves as a connection between two or more parallel tracks, allowing a train to switch between them.

In many cases, where a switch is supplied to leave a track, a second is supplied to allow the train to reenter the track some distance down the line; this allows the track to serve as a siding, allowing a train to get off the track to allow traffic to pass (this siding can either be a dedicated short length of track, or formed from a section of a second, continuous, parallel line), and also allows trains coming from either direction to switch between lines; otherwise, the only way for a train coming from the opposite direction to use a switch would be to stop, and reverse through the switch onto the other line, and then continue forwards (or stop, if it is being used as a siding).

A straight track is not always present; for example, both tracks may curve, one to the left and one to the right (such as for a wye switch), or both tracks may curve, with differing radii, while still in the same direction. Switches consume a relatively high proportion of a railway maintenance budget.

Operation in cold conditions

Under cold weather conditions, snow and ice can prevent the proper movement of switch or frog point rails, essentially inhibiting the proper operation of railroad switches. Heating alone may not always be enough to keep switches functioning under snowy conditions. Wet snow conditions, which generate particularly sticky snow and whiteout conditions, may occur at temperatures just below freezing, causing chunks of ice to accumulate on trains.

When trains traverse over some switches, the shock, vibration, possibly in combination with slight heating caused by braking or a city microclimate, may cause the chunks of ice to fall off, jamming the switches. The heaters need time to melt the ice, so if service frequency is extremely high, there may not be enough time for the ice to melt before the next train arrives, which will then result in service disruptions.

Possible solutions include installing higher capacity heaters, reducing the frequency of trains, or applying anti-icing chemicals such as ethylene glycol to the trains.

Crossing (frog)

The crossing or frog is the component that enables passage of wheels on either route through the turnout. It can be assembled out of several appropriately cut and bent pieces of rail or can be a single casting of manganese steel. On lines with heavy use, the casting may be treated with explosive shock hardening to increase service life.

Crossover

A crossover is a pair of switches that connects two parallel rail tracks, allowing a train on one track to cross over to the other. Like the switches themselves, crossovers can be described as either facing or trailing. When two crossovers are present in opposite directions, one after the other, the four-switch configuration is called a universal crossover.

If the crossovers overlap to form an × in the center, it is called a double crossover, a scissors crossover, or just scissors; due to requiring a diamond crossing in the center, it is also sometimes known as a diamond crossover. This makes for a very compact track layout, but requires more maintenance and is more expensive to produce. In a setup where each of the two tracks normally carries trains of only one direction, a crossover can be used either to detour "wrong-rail" around an obstruction or to reverse direction.

A crossover can also join two tracks of the same direction, possibly a pair of local and express tracks, and allow trains to switch from one to the other. On a crowded system, routine use of crossovers (or switches in general) will reduce throughput, as use of the switch blocks multiple tracks.

For this reason, on some high-capacity rapid transit systems, crossovers between local and express tracks are not used during normal rush hour service, and service patterns are planned around use of the usually flying junctions at each end of the local-express line.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1365142263 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

19 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.