Ramsey interferometry
≈ 10 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Ramsey interferometry, also known as the separated oscillating fields method, is a form of particle interferometry that uses the phenomenon of magnetic resonance to measure transition frequencies of particles. It was developed in 1949 by Norman Ramsey, who built upon the ideas of his mentor, Isidor Isaac Rabi, who initially developed a technique for measuring particle transition frequencies. Ramsey's method is used today in atomic clocks and in the SI definition of the second.
How it works
Most precision atomic measurements, such as modern atom interferometers and quantum logic gates, have a Ramsey-type configuration. A more modern method, known as Ramsey–Bordé interferometry uses a Ramsey configuration and was developed by French physicist Christian Bordé and is known as the Ramsey–Bordé interferometer. Bordé's main idea was to use atomic recoil to create a beam splitter of different geometries for an atom-wave.
The Ramsey–Bordé interferometer specifically uses two pairs of counter-propagating interaction waves, and another method named the "photon-echo" uses two co-propagating pairs of interaction waves. __TOC__
Ramsey interferometry, also known as the separated oscillating fields method, is a form of particle interferometry that uses the phenomenon of magnetic resonance to measure transition frequencies of particles. It was developed in 1949 by Norman Ramsey, who built upon the ideas of his mentor, Isidor Isaac Rabi, who initially developed a technique for measuring particle transition frequencies. Ramsey's method is used today in atomic clocks and in the SI definition of the second.
Most precision atomic measurements, such as modern atom interferometers and quantum logic gates, have a Ramsey-type configuration. A more modern method, known as Ramsey–Bordé interferometry uses a Ramsey configuration and was developed by French physicist Christian Bordé and is known as the Ramsey–Bordé interferometer. Bordé's main idea was to use atomic recoil to create a beam splitter of different geometries for an atom-wave.
The Ramsey–Bordé interferometer specifically uses two pairs of counter-propagating interaction waves, and another method named the "photon-echo" uses two co-propagating pairs of interaction waves. __TOC__ A main goal of precision spectroscopy of a two-level atom is to measure the absorption frequency \omega_0 between the ground state and excited state of the atom.
Evidence and sources
One way to accomplish this measurement is to apply an external oscillating electromagnetic field at frequency \omega and then find the difference \Delta (also known as the detuning) between \omega and \omega_0 (\Delta = \omega - \omega_0) by measuring the probability to transfer to . This probability can be maximized when , when the driving field is in resonance with the transition frequency of the atom. Looking at this probability of transition as a function of the detuning , the narrower the peak around \Delta = 0 , the more precision there is.
If the peak were very broad about , then it would be difficult to distinguish precisely where is located due to many values of having close to the same probability. A simplified version of the Rabi method consists of a beam of atoms, all having the same speed v and the same direction, sent through one interaction zone of length L .
The atoms are two-level atoms with a transition energy of \hbar\omega_0 (this is defined by applying a field \mathbf{B}_{\|} in an excitation direction \hat{z} , and thus \omega_0 = \gamma|\mathbf{B}_{\|}| , the Larmor frequency), and with an interaction time of \tau = L/v in the interaction zone.
In the interaction zone, a monochromatic oscillating magnetic field \mathbf{B}_{\perp}\cos(\omega t) is applied perpendicular to the excitation direction, and this will lead to Rabi oscillations between and at a frequency of \Omega_{\perp} = \gamma|\mathbf{B}_{\perp}| . The Hamiltonian in the rotating frame (including the rotating-wave approximation) is \hat{H} = -\frac{\hbar\Delta}{2}\hat{\sigma_z} + \frac{\hbar\Omega_{\perp}}{2}\hat{\sigma_x}.
The probability of transition from and can be found from this Hamiltonian and is P(\Delta,v,L,\Omega_\perp) = \frac{1}{1 + \left(\frac{\Delta}{\Omega_\perp}\right)^2}\sin^2\left(\frac{L}{2v}\sqrt{\Omega_\perp^2 + \Delta^2}\right). This probability will be at its maximum when \Omega_{\perp}\tau = \pi . The line width \delta of this P(\Delta,\Omega_\perp) vs. \Delta/\Omega_\perp determines the precision of the measurement.
Because \delta \sim \Omega_\perp \sim \pi/\tau \sim \pi v/L , by increasing \tau or L , and correspondingly decreasing \Omega_\perp so that their product is \pi , the precision of the measurement increases; i.e. the peak of the graph becomes narrower. In reality, however, inhomogeneities such as the atoms having a distribution of velocities or there being an inhomogeneous \mathbf{B}_\perp will cause the line shape to broaden and lead to decreased precision.
Having a distribution of velocities means having a distribution of interaction times, and therefore there would be many angles through which state vectors would flip on the Bloch sphere. There would be an optimal length in the Rabi setup that would give the greatest precision, but it would not be possible to increase the length L infinitely and expect ever increasing precision, as was the case in the perfect, simple Rabi model. P(T,\Delta) = \cos^2\left(\frac{\Delta T}{2}\right) = \cos^2\left(\frac{\Delta L}{2v}\right).
This probability function describes the well-known Ramsey fringes. If there is a distribution of velocities and a "hard pulse" \left(|\Delta| \ll \Omega_{\perp}\right) is applied in the interaction zones so that all of the spins of the atoms are rotated \pi/2 on the Bloch sphere regardless of whether or not they all were excited to exactly the same resonance frequency, the Ramsey fringes will look very similar to those discussed above. If a hard pulse is not applied, then the variation in interaction times must be taken into account.
What results are Ramsey fringes in an envelope in the shape of the Rabi method probability for atoms of one velocity. The line width \delta of the fringes in this case is what determines the precision with which \Delta can be determined and is \delta \sim \frac{1}{T} \sim \frac{v}{L}. By increasing the time of flight T in the non-interaction zone, or equivalently increasing the length L of the non-interaction zone, the line width can be substantially improved, by a factor of 10 or more, over that of other methods.
Because Ramsey's model allows a longer observation time, one can more precisely determine \omega_0 . This is a statement of the time-energy uncertainty principle: the larger the uncertainty in the time domain, the smaller the uncertainty in the energy domain, or equivalently the frequency domain. Thought of another way, if two waves of almost exactly the same frequency are superimposed upon each other, then it will be impossible to distinguish them if the resolution of our eyes is larger than the difference between the two waves.
Only after a long period of time will the difference between two waves become large enough to differentiate the two. Early Ramsey interferometers used two interaction zones separated in space, but it is also possible to use two pulses separated in time, as long as the pulses are coherent. In the case of time-separated pulses, the longer the time between pulses, the more precise the measurement. An atomic clock is fundamentally an oscillator whose frequency \omega is matched to that of an atomic transition of a two-level atom, \omega_0 .
The oscillator is the parallel external electromagnetic field in the non-interaction zone of the Ramsey–Bordé interferometer. By measuring the transition rate from the excited to the ground state, one can tune the oscillator so that \omega = \omega_0 by finding the frequency that yields the maximum transition rate.
Once the oscillator is tuned, the number of oscillations of the oscillator can be counted electronically to give a certain time interval (e.g. the SI second, which is 9,192,631,770 periods of a cesium-133 If one atom is sent into the setup in its ground state \left|\downarrow\right\rangle and passed through the first interaction zone, the state would become a superposition of ground and excited states \frac{1}{\sqrt{2}}\left(\left|\downarrow\right\rangle + \left|\uparrow\right\rangle\right) , just as it would with a regular Ramsey interferometer.
It then passes through the quantum cavity, which initially contains only a vacuum, and then is measured to be \left|\downarrow\right\rangle or \left|\uparrow\right\rangle . A second atom initially in \left|\downarrow\right\rangle is then sent through the cavity and then through the phase-shifted second Ramsey interaction zone. If the first atom is measured to be in \left|\downarrow\right\rangle , then the probability that the second atom is in \left|\uparrow\right\rangle depends on the amount of time between sending in the first and the second atoms.
The fundamental reason for this is that if the first atom is measured to be in \left|\downarrow\right\rangle , then there is a single mode of the electromagnetic field within the cavity that will subsequently affect the measurement outcome of the second atom. \hat{H}_R = -\mathbf{\Omega} \cdot \left(\hat{\mathbf{r}} \times \hat{\mathbf{p}}\right).
This Hamiltonian leads to a time evolution operator to first order in \Omega : \hat{U}_R = \exp\left(\frac{i}{\hbar}\int dt' [\mathbf{\Omega} \times \hat{\mathbf{r}}(t')] \cdot [\mathbf{p_0} + m_\alpha \hbar\mathbf{k}] \right). If \mathbf{\Omega} is perpendicular to \hat{\mathbf{r}}(t') , then the round trip phase factor for one oscillation is given by \exp\left(2ik\Omega d^2/v\right) , where d is the length of the entire apparatus from the first interaction zone to the final interaction zone.
This will yield a probability such that P \propto \cos\left[\left(\Delta + \frac{2\pi\Omega d}{\lambda}+\phi\right)\frac{2d}{v}\right], where \lambda is the wavelength of the atomic two-level transition. This probability represents a shift from \omega_0 by a factor of \delta v = \frac{\Omega d}{\lambda}.
Impact
For a calcium atom on the Earth's surface that rotates at \Omega = \pi/12\text{ hours} , using 2d = 21\text{ cm} and looking at the \lambda = 657.3\text{ nm} transition, the shift in the fringes would be \delta v \approx 12\text{ Hz} , which is a measurable effect. A similar effect can be calculated for the shift in the Ramsey fringes caused by the acceleration of gravity. The shifts in the fringes will reverse direction if the directions of the lasers in the interaction zones are reversed, and the shift will cancel if standing waves are used.
The Ramsey–Bordé interferometer provides the potential for improved frequency measurements in the presence of external fields or rotations.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1324106550 under CC BY-SA 4.0; modifications have been made.