RapidCAD

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

RapidCAD is a specially packaged Intel 486DX and a dummy floating-point unit (FPU) designed as pin-compatible replacements for an Intel 80386 processor and 80387 FPU. Because the i486DX has a working on-chip FPU, a dummy FPU package (the "RapidCAD-2") is supplied to go in the Intel 387 FPU socket. The dummy FPU is used to provide the FERR (Floating-point ERRor) signal, necessary for compatibility purposes.

Despite being able to execute instructions in the same number of cycles as an i486DX, integer performance on RapidCAD suffers due to the absence of level 1 cache and the bottleneck of the 386 bus. RapidCAD offers minimal improvement in integer performance over a 386DX (typically 10%, at most 35%), but provides substantial improvement in floating-point operations (up to 80% faster) for which it was marketed, primarily for computer-aided design (hence the name). Floating-point performance is mostly improved by moving the FPU onto the CPU core.

Other source reports that the performance boost ranged from 20 to 170 percent faster than the regular 386DX based motherboards. It was available at manufacturer's suggested list price of US$499. File:KL intel RapidCAD1.jpg|Intel RapidCAD-1 File:KL intel RapidCAD2.jpg|Intel RapidCAD-2

RapidCAD is a specially packaged Intel 486DX and a dummy floating-point unit (FPU) designed as pin-compatible replacements for an Intel 80386 processor and 80387 FPU. Because the i486DX has a working on-chip FPU, a dummy FPU package (the "RapidCAD-2") is supplied to go in the Intel 387 FPU socket. The dummy FPU is used to provide the FERR (Floating-point ERRor) signal, necessary for compatibility purposes.

Despite being able to execute instructions in the same number of cycles as an i486DX, integer performance on RapidCAD suffers due to the absence of level 1 cache and the bottleneck of the 386 bus. RapidCAD offers minimal improvement in integer performance over a 386DX (typically 10%, at most 35%), but provides substantial improvement in floating-point operations (up to 80% faster) for which it was marketed, primarily for computer-aided design (hence the name). Floating-point performance is mostly improved by moving the FPU onto the CPU core.

Other source reports that the performance boost ranged from 20 to 170 percent faster than the regular 386DX based motherboards. It was available at manufacturer's suggested list price of US$499. File:KL intel RapidCAD1.jpg|Intel RapidCAD-1 File:KL intel RapidCAD2.jpg|Intel RapidCAD-2

Technical specifications

Intel RapidCAD-1 Package: 132-pin CPGA CPU clock: 16–33 MHz Transistors: 800,000 Process: CHMOS 0.8 μm Voltage: 5 V sSpec: SZ624 Intel RapidCAD-2 Package: 68-pin CPGA CPU clock: 16–33 MHz Transistors: 275,000 Process: CHMOS Voltage: 5 V sSpec: SZ625

See also

Intel 80486 OverDrive Pentium OverDrive

References

External links

CPU Shack – The CPU Museum: Intel RAPIDCAD pc-atrium – Intel RapidCAD Prozessoren

Text derived from https://en.wikipedia.org/w/index.php?oldid=1366556079 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.