Real projective plane

In mathematics, the real projective plane, denoted or , is a two-dimensional projective space, similar to the familiar Euclidean plane in many respects but without the concepts of distance, circles, angle measure, or parallelism.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In mathematics, the real projective plane, denoted or , is a two-dimensional projective space, similar to the familiar Euclidean plane in many respects but without the concepts of distance, circles, angle measure, or parallelism. It is the setting for planar projective geometry, in which the relationships between objects are not considered to change under projective transformations.

The name projective comes from perspective drawing: projecting an image from one plane onto another as viewed from a point outside either plane, for example by photographing a flat painting from an oblique angle, is a projective transformation. The fundamental objects in the projective plane are points and straight lines, and as in Euclidean geometry, every pair of points determines a unique line passing through both, but unlike in the Euclidean case in projective geometry every pair of lines also determines a unique point at their intersection (in Euclidean geometry, parallel lines never intersect).

In contexts where there is no ambiguity, it is simply called the projective plane; the qualifier "real" is added to distinguish it from other projective planes such as the complex projective plane and finite projective planes.…

In mathematics, the real projective plane, denoted or , is a two-dimensional projective space, similar to the familiar Euclidean plane in many respects but without the concepts of distance, circles, angle measure, or parallelism. It is the setting for planar projective geometry, in which the relationships between objects are not considered to change under projective transformations.

The name projective comes from perspective drawing: projecting an image from one plane onto another as viewed from a point outside either plane, for example by photographing a flat painting from an oblique angle, is a projective transformation. The fundamental objects in the projective plane are points and straight lines, and as in Euclidean geometry, every pair of points determines a unique line passing through both, but unlike in the Euclidean case in projective geometry every pair of lines also determines a unique point at their intersection (in Euclidean geometry, parallel lines never intersect).

In contexts where there is no ambiguity, it is simply called the projective plane; the qualifier "real" is added to distinguish it from other projective planes such as the complex projective plane and finite projective planes. One common model of the real projective plane is the space of lines in three-dimensional Euclidean space which pass through a particular origin point; in this model, lines through the origin are considered to be the "points" of the projective plane, and planes through the origin are considered to be the "lines" in the projective plane.

These projective points and lines can be pictured in two dimensions by intersecting them with any arbitrary plane not passing through the origin; then the parallel plane which does pass through the origin (a projective "line") is called the line at infinity. (See below.)

In topology, the name real projective plane is applied to any surface which is topologically equivalent to the real projective plane. Topologically, the real projective plane is compact and non-orientable (one-sided). It cannot be embedded in three-dimensional Euclidean space without intersecting itself.

It has Euler characteristic 1, hence a demigenus (non-orientable genus, Euler genus) of 1. The topological real projective plane can be constructed by taking the (single) edge of a Möbius strip and gluing it to itself in the correct direction, or by gluing the edge to a disk.

Alternately, the real projective plane can be constructed by identifying each pair of opposite sides of the square, but in opposite directions, as shown in the diagram. (Performing any of these operations in three-dimensional space causes the surface to intersect itself.)

Boy's surface – an immersion

The projective plane can be immersed (local neighbourhoods of the source space do not have self-intersections) in 3-space. Boy's surface is an example of an immersion. Polyhedral examples must have at least nine faces.

Planar projections

Various planar (flat) projections or mappings of the projective plane have been described. In 1874 Klein described the mapping: k (x, y) = \left(1 + x^2 + y^2\right)^\frac{1}{2} \binom xy Central projection of the projective hemisphere onto a plane yields the usual infinite projective plane, described below.

X(u,v) &= r(1 + \cos v) \cos u, \\ Y(u,v) &= r(1 + \cos v) \sin u, \\ Z(u,v) &= -\operatorname{tanh}\left(u - \pi \right) r\sin v, \end{align} where both u and v range from 0 to 2 . These equations are similar to those of a torus. Figure 1 shows a closed cross-capped disk.

A cross-capped disk has a plane of symmetry that passes through its line segment of double points. In Figure 1 the cross-capped disk is seen from above its plane of symmetry z = 0, but it would look the same if seen from below. A cross-capped disk can be sliced open along its plane of symmetry, while making sure not to cut along any of its double points.

The result is shown in Figure 2. Once this exception is made, it will be seen that the sliced cross-capped disk is homeomorphic to a self-intersecting disk, as shown in Figure 3. The self-intersecting disk is homeomorphic to an ordinary disk.

The parametric equations of the self-intersecting disk are: \begin{align} X(u, v) &= rv \cos 2u, \\ Y(u, v) &= rv\sin 2u, \\ Z(u, v) &= rv\cos u, \end{align} where u ranges from 0 to 2 and v ranges from 0 to 1. Projecting the self-intersecting disk onto the plane of symmetry (z = 0 in the parametrization given earlier) which passes only through the double points, the result is an ordinary disk which repeats itself (doubles up on itself).

The plane z = 0 cuts the self-intersecting disk into a pair of disks which are mirror reflections of each other. The disks have centers at the origin. Now consider the rims of the disks (with v = 1).

The points on the rim of the self-intersecting disk come in pairs which are reflections of each other with respect to the plane z = 0. A cross-capped disk is formed by identifying these pairs of points, making them equivalent to each other.

This means that a point with parameters (u, 1) and coordinates (r\cos 2u, r\sin 2u, r\cos u) is identified with the point (u +  , 1) whose coordinates are (r\cos 2 u, r\sin 2 u, - r\cos u) . But this means that pairs of opposite points on the rim of the (equivalent) ordinary disk are identified with each other; this is how a real projective plane is formed out of a disk. Therefore, the surface shown in Figure 1 (cross-cap with disk) is topologically equivalent to the real projective plane RP 2 .

The lines in the plane can also be represented by homogeneous coordinates. A projective line corresponding to the plane in R 3 has the homogeneous coordinates (a : b : c). Thus, these coordinates have the equivalence relation (a : b : c) = (da : db : dc) for all nonzero values of d. Hence a different equation of the same line dax + dby + dcz = 0 gives the same homogeneous coordinates.

A point [x : y : z] lies on a line (a : b : c) if ax + by + cz = 0. Therefore, lines with coordinates (a : b : c) where a, b are not both 0 correspond to the lines in the usual real plane, because they contain points that are not at infinity. The line with coordinates (0 : 0 : 1) is the line at infinity, since the only points on it are those with z = 0.

A line in P 2 can be represented by the equation ax + by + cz = 0. If we treat a, b, and c as the column vector ℓ and x, y, z as the column vector x then the equation above can be written in matrix form as: x T ℓ = 0 or ℓ T x = 0. Using vector notation we may instead write x ⋅ ℓ = 0 or ℓ ⋅ x = 0.

The equation k(x T ℓ) = 0 (which k is a non-zero scalar) sweeps out a plane that goes through zero in R 3 and k(x) sweeps out a line, again going through zero. The plane and line are linear subspaces in R 3 , which always go through zero. If we have a normalized homogeneous coordinate.

All points that have z = 1 create a plane. Let's pretend we are looking at that plane (from a position further out along the z axis and looking back towards the origin) and there are two parallel lines drawn on the plane. From where we are standing (given our visual capabilities) we can see only so much of the plane, which we represent as the area outlined in red in the diagram.

If we walk away from the plane along the z axis, (still looking backwards towards the origin), we can see more of the plane. In our field of view original points have moved. We can reflect this movement by dividing the homogeneous coordinate by a constant.

In the adjacent image we have divided by 2 so the z value now becomes 0.5. If we walk far enough away what we are looking at becomes a point in the distance. As we walk away we see more and more of the parallel lines.

The lines will meet at a line at infinity (a line that goes through zero on the plane at ). Lines on the plane when are ideal points. The plane at is the line at infinity.

The homogeneous point is where all the real points go when you're looking at the plane from an infinite distance, a line on the plane is where parallel lines intersect. S 2 = {(x, y, z) ∈ R 3 : x 2 + y 2 + z 2 = 1} by the antipodal relation . Consider the function given by .

This map restricts to a map whose domain is S 2 and, since each component is a homogeneous polynomial of even degree, it takes the same values in R 4 on each of any two antipodal points on S 2 . This yields a map . Moreover, this map is an embedding.

Notice that this embedding admits a projection into R 3 which is the Roman surface. The real projective plane on YouTube

Text derived from https://en.wikipedia.org/w/index.php?oldid=1360810231 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.