Realization (systems)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In systems theory, a realization of a state space model is an implementation of a given input-output behavior. That is, given an input-output relationship, a realization is a quadruple of (time-varying) matrices [A(t),B(t),C(t),D(t)] such that : \dot{\mathbf{x}}(t) = A(t) \mathbf{x}(t) + B(t) \mathbf{u}(t) : \mathbf{y}(t) = C(t) \mathbf{x}(t) + D(t) \mathbf{u}(t) with (u(t),y(t)) describing the input and output of the system at time t .

In systems theory, a realization of a state space model is an implementation of a given input-output behavior. That is, given an input-output relationship, a realization is a quadruple of (time-varying) matrices [A(t),B(t),C(t),D(t)] such that \dot{\mathbf{x}}(t) = A(t) \mathbf{x}(t) + B(t) \mathbf{u}(t) \mathbf{y}(t) = C(t) \mathbf{x}(t) + D(t) \mathbf{u}(t) with (u(t),y(t)) describing the input and output of the system at time t .

LTI System

For a linear time-invariant system specified by a transfer matrix, H(s) , a realization is any quadruple of matrices (A,B,C,D) such that H(s) = C(sI-A)^{-1}B+D . H(s) = \frac{n_{3}s^{3} + n_{2}s^{2} + n_{1}s + n_{0}}{s^{4} + d_{3}s^{3} + d_{2}s^{2} + d_{1}s + d_{0}} . The coefficients can now be inserted directly into the state-space model by the following approach: \dot{\textbf{x}}(t) = \begin{bmatrix} -d_{3}& -d_{2}& -d_{1}& -d_{0}\\ 1& 0& 0& 0\\ 0& 1& 0& 0\\ 0& 0& 1& 0 \end{bmatrix}\textbf{x}(t) + \begin{bmatrix} 1\\ 0\\ 0\\ 0\\ \end{bmatrix}\textbf{u}(t) \textbf{y}(t) = \begin{bmatrix} n_{3}& n_{2}& n_{1}& n_{0} \end{bmatrix}\textbf{x}(t) . This state-space realization is called controllable canonical form (also known as phase variable canonical form) because the resulting model is guaranteed to be controllable (i.e., because the control enters a chain of integrators, it has the ability to move every state). The transfer function coefficients can also be used to construct another type of canonical form \dot{\textbf{x}}(t) = \begin{bmatrix} -d_{3}& 1& 0& 0\\ -d_{2}& 0& 1& 0\\ -d_{1}& 0& 0& 1\\ -d_{0}& 0& 0& 0 \end{bmatrix}\textbf{x}(t) + \begin{bmatrix} n_{3}\\ n_{2}\\ n_{1}\\ n_{0} \end{bmatrix}\textbf{u}(t) \textbf{y}(t) = \begin{bmatrix} 1& 0& 0& 0 \end{bmatrix}\textbf{x}(t) . This state-space realization is called observable canonical form because the resulting model is guaranteed to be observable (i.e., because the output exits from a chain of integrators, every state has an effect on the output).

General System

=== D = 0=== If we have an input u(t) , an output y(t) , and a weighting pattern T(t,\sigma) then a realization is any triple of matrices [A(t),B(t),C(t)] such that T(t,\sigma) = C(t) \phi(t,\sigma) B(\sigma) where \phi is the state-transition matrix associated with the realization.

System identification

System identification techniques take the experimental data from a system and output a realization. Such techniques can utilize both input and output data (e.g. eigensystem realization algorithm) or can only include the output data (e.g. frequency domain decomposition). Typically an input-output technique would be more accurate, but the input data is not always available.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375943934 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001375943934 · captured 1789947246.0 · version history

Cite this page as: encyclopegia.org, “Realization (systems)”, snapshot enwiki-001375943934. https://encyclopegia.org/a/realization-systems

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.