Rebatching (soapmaking)

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Rebatching, or hand milling, is a soapmaking technique used by hobbyists and artisan soapmakers. The commercial equivalent is French milling. In rebatching, commercially purchased or previously made soap (a soap base) is shredded or diced finely and mixed with a liquid, into which the soap shreds begin to dissolve. It is then heated at a fairly low temperature until the mass is more or less homogeneous. When it becomes translucent and reaches a thick, gel-like consistency, it is spooned or piped into molds and allowed to harden. Soapmakers frequently use rebatching as a way of adding substances that could not withstand the high temperatures or caustic chemical environment of cold process or hot process soapmaking, such as certain essential oils (for example, those with a very low flash point). The choice of liquid affects the character of the finished soap; milk is frequently used to give the soap a smooth, creamy consistency. Rebatching can also be used as a way of salvaging soap that cracked, curdled or separated while being made. As with the melt and pour process, rebatching does not necessarily involve saponification, and as such it is a misnomer to refer to it as soap-"making".

Rebatching, or hand milling, is a soapmaking technique used by hobbyists and artisan soapmakers. The commercial equivalent is French milling. In rebatching, commercially purchased or previously made soap (a soap base) is shredded or diced finely and mixed with a liquid, into which the soap shreds begin to dissolve. It is then heated at a fairly low temperature until the mass is more or less homogeneous. When it becomes translucent and reaches a thick, gel-like consistency, it is spooned or piped into molds and allowed to harden. Soapmakers frequently use rebatching as a way of adding substances that could not withstand the high temperatures or caustic chemical environment of cold process or hot process soapmaking, such as certain essential oils (for example, those with a very low flash point). The choice of liquid affects the character of the finished soap; milk is frequently used to give the soap a smooth, creamy consistency. Rebatching can also be used as a way of salvaging soap that cracked, curdled or separated while being made. As with the melt and pour process, rebatching does not necessarily involve saponification, and as such it is a misnomer to refer to it as soap-"making".

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1325316460 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.