Rechargeable battery

in a data center battery for mobile devices A rechargeable battery, storage battery, or secondary cell (formally a type of energy accumulator) is a type of electric battery which can be charged, discharged into a load, and recharged many…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

in a data center battery for mobile devices A rechargeable battery, storage battery, or secondary cell (formally a type of energy accumulator) is a type of electric battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells.

The term "accumulator" is used as it accumulates and stores energy through a reversible electrochemical reaction. Rechargeable batteries are produced in many different shapes and sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.

Several different combinations of electrode materials and electrolytes are used, including lead–acid, zinc–air, nickel–cadmium (NiCd), nickel–metal hydride (NiMH), lithium-ion (Li-ion), lithium iron phosphate (LiFePO 4 ), and lithium-ion polymer (Li-ion polymer). Rechargeable batteries typically initially cost more than disposable batteries but have a much lower total cost of ownership and environmental impact, as they can be recharged inexpensively many times before they need replacing.

Some rechargeable battery types are available in the same sizes and voltages as disposable types, and can be used interchangeably with them.…

in a data center battery for mobile devices A rechargeable battery, storage battery, or secondary cell (formally a type of energy accumulator) is a type of electric battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use. It is composed of one or more electrochemical cells.

The term "accumulator" is used as it accumulates and stores energy through a reversible electrochemical reaction. Rechargeable batteries are produced in many different shapes and sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.

Several different combinations of electrode materials and electrolytes are used, including lead–acid, zinc–air, nickel–cadmium (NiCd), nickel–metal hydride (NiMH), lithium-ion (Li-ion), lithium iron phosphate (LiFePO 4 ), and lithium-ion polymer (Li-ion polymer). Rechargeable batteries typically initially cost more than disposable batteries but have a much lower total cost of ownership and environmental impact, as they can be recharged inexpensively many times before they need replacing.

Some rechargeable battery types are available in the same sizes and voltages as disposable types, and can be used interchangeably with them. Billions of dollars in research are being invested around the world for improving batteries as industry focuses on building better batteries. b Energy density = energy/weight or energy/size, given in three different units c Specific power = power/weight in W/kg e Energy/consumer price in W·h/US$ (approximately) f Self-discharge rate in %/month g Cycle durability in number of cycles h Time durability in years i VRLA or recombinant includes gel batteries and absorbed glass mats p Pilot production Several types of lithium–sulfur battery have been developed, and numerous research groups and organizations have demonstrated that batteries based on lithium sulfur can achieve superior energy density to other lithium technologies.

Whereas lithium-ion batteries offer energy density in the range of 150 260 Wh/kg, batteries based on lithium-sulfur are expected to achieve 450 500 Wh/kg, and can eliminate cobalt, nickel and manganese from the production process. Furthermore, while initially lithium-sulfur batteries suffered from stability problems, recent research has made advances in developing lithium-sulfur batteries that cycle as long as (or longer than) batteries based on conventional lithium-ion technologies.

The thin-film battery (TFB) is a refinement of lithium ion technology by Excellatron. The developers claim a large increase in recharge cycles to around 40,000 and higher charge and discharge rates, at least 5 C charge rate.

Sustained 60 C discharge and 1000 C peak discharge rate and a significant increase in specific energy, and energy density. lithium iron phosphate batteries are used in some applications. UltraBattery, a hybrid lead–acid battery and ultracapacitor invented by Australia's national science organisation CSIRO, exhibits tens of thousands of partial state of charge cycles and has outperformed traditional lead-acid, lithium, and NiMH-based cells when compared in testing in this mode against variability management power profiles.

UltraBattery has kW and MW-scale installations in place in Australia, Japan, and the U.S. It has also been subjected to extensive testing in hybrid electric vehicles and has been shown to last more than 100,000 vehicle miles in on-road commercial testing in a courier vehicle. The technology is claimed to have a lifetime of 7 to 10 times that of conventional lead-acid batteries in high rate partial state-of-charge use, with safety and environmental benefits claimed over competitors like lithium-ion.

Its manufacturer suggests an almost 100% recycling rate is already in place for the product. The potassium-ion battery delivers around a million cycles, due to the extraordinary electrochemical stability of potassium insertion/extraction materials such as Prussian blue. The sodium-ion battery is meant for stationary storage and competes with lead–acid batteries.

It aims at a low total cost of ownership per kWh of storage. This is achieved by a long and stable lifetime. The effective number of cycles is above 5000 and the battery is not damaged by deep discharge.

The energy density is rather low, somewhat lower than lead–acid. Galbraith, Kate. In Presidio, a Grasp at the Holy Grail of Energy Storage, The New York Times, 6 November 2010.

Galbraith, Kate. Filling the Gaps in the Flow of Renewable Energy, The New York Times, 22 October 2013. Witkin, Jim.

Building Better Batteries for Electric Cars, The New York Times, 31 March 2011, p. F4. Published online 30 March 2011. Discusses rechargeable batteries and the new-technology lithium ion battery.

Wald, Matthew L. Hold That Megawatt!, The New York Times, 7 January 2011. Discusses AES Energy Storage. Wald, Matthew L. Green Blog: Is That Onions You Smell?

Or Battery Juice?, The New York Times, 9 May 2012. Discusses vanadium redox battery technology. Wald, Matthew L. Green Blog: Cutting the Electric Bill with a Giant Battery, The New York Times, 27 June 2012.

Discusses Saft Groupe S.A. Wald, Matthew L. Seeking to Start a Silicon Valley for Battery Science, The New York Times, 30 November 2012. Wald, Matthew L. From Harvard, a Cheaper Storage Battery, The New York Times, 8 January 2014. Discusses research into flow-batteries utilizing carbon-based molecules called quinones.

Witkin, Jim. Building Better Batteries for Electric Cars, The New York Times, 31 March 2011, p. F4. Published online 30 March 2011.

Discusses rechargeable batteries and lithium ion batteries. Witkin, Jim. Green Blog: A Second Life for the Electric Car Battery, The New York Times, 27 April 2011.

Describes: ABB; Community Energy Storage for the use of electric vehicle batteries for grid energy storage. Woody, Todd. Green Blog: When It Comes to Car Batteries, Moore's Law Does Not Compute, The New York Times, 6 September 2010.

Discusses lithium-air batteries. Jang Wook Choi. Promise and reality of post-lithium-ion batteries with high energy densities.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1366726083 under CC BY-SA 4.0; modifications have been made.

References

2 claims could not be tied to a specific sentence and are listed in the table below instead.