Lesson plan
Recoating
Recoating is the process of restoring the primary coating to stripped optical fiber sections after fusion splicing. In the recoating process, the spliced fiber is restored to its original shape and strength, using a recoater. The stripped fiber section is recoated by filling a recoating resin, usually acrylate into transparent moulds. The resin is then cured with UV light. It is often desirable to perform a proof-test after recoating, to ensure that the splice is strong enough to survive handling, packaging and extended use. Recoated splices can usually be coiled into a tight radius because the recoated fiber section is just as flexible as the original polymer coating. Recoats are e.g. employed in the assembly of undersea optical fiber cables where high fusion splice strength is already necessitated by stringent reliability requirements. Another reason optical fiber recoating is attractive in submarine communications cabling is that the cross section of recoated fibers matches that of the original fiber. The first commercial optical fiber recoaters were developed by the Swedish firms Nyfors Teknologi AB and LM Ericsson in the late 1980s for the telecommunications industry.
Article summary
Recoating is the process of restoring the primary coating to stripped optical fiber sections after fusion splicing. In the recoating process, the spliced fiber is restored to its original shape and strength, using a recoater. The stripped fiber section is recoated by filling a recoating resin, usually acrylate into transparent moulds. The resin is then cured with UV light. It is often desirable to perform a proof-test after recoating, to ensure that the splice is strong enough to survive handling, packaging and extended use. Recoated splices can usually be coiled into a tight radius because the recoated fiber section is just as flexible as the original polymer coating. Recoats are e.g. employed in the assembly of undersea optical fiber cables where high fusion splice strength is already necessitated by stringent reliability requirements. Another reason optical fiber recoating is attractive in submarine communications cabling is that the cross section of recoated fibers matches that of the original fiber. The first commercial optical fiber recoaters were developed by the Swedish firms Nyfors Teknologi AB and LM Ericsson in the late 1980s for the telecommunications industry.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.