Recoil
≈ 6 min read
Names in other languages
- ČeštinaRecoil
- DeutschRecoil
- EnglishRecoil
- FrançaisRecoil
- nbRecoil
- NederlandsRecoil
- РусскийRecoil
- skRecoil
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Recoil (often called knockback, kickback or simply kick) is the rearward thrust generated when a gun is being discharged. In technical terms, the recoil is a result of conservation of momentum, for according to Newton's third law the force required to accelerate something will evoke an equal but opposite reactional force, which means the forward momentum gained by the projectile and exhaust gases (ejectae) will be mathematically balanced out by an equal and opposite impulse exerted back upon the gun.
Recoil (often called knockback, kickback or simply kick) is the rearward thrust generated when a gun is being discharged.
In technical terms, the recoil is a result of conservation of momentum, for according to Newton's third law the force required to accelerate something will evoke an equal but opposite reactional force, which means the forward momentum gained by the projectile and exhaust gases (ejectae) will be mathematically balanced out by an equal and opposite impulse exerted back upon the gun. p_\text{f} + p_\text{p} = 0 where p_\text{f} is the momentum of the firearm and p_\text{p} is the momentum of the projectile.
In other words, immediately after firing, the momentum of the firearm is equal and opposite to the momentum of the projectile.
Since momentum of a body is defined as its mass multiplied by its velocity, we can rewrite the above equation as: m_\text{f} v_\text{f} + m_\text{p} v_\text{p} = 0 where: m_\text{f} is the mass of the firearm v_\text{f} is the velocity of the firearm immediately after firing m_\text{p} is the mass of the projectile v_\text{p} is the velocity of the projectile immediately after firing A force integrated over the time period during which it acts will yield the momentum supplied by that force.
The counter-recoil force must supply enough momentum to the firearm to bring it to a halt.
This means that: \int_0^{t_\text{cr}} F_\text{cr}(t) \, dt = -m_\text{f} v_\text{f} = m_\text{p} v_\text{p} where: F_\text{cr}(t)\, is the counter-recoil force as a function of time ( ) t_\text{cr} is duration of the counter-recoil force A similar equation can be written for the recoil force on the firearm: \int_0^{t_\text{r}} F_\text{r}(t)\,dt = m_\text{f} v_\text{f} = -m_\text{p} v_\text{p} where: F_\text{r}(t) is the recoil force as a function of time ( ) t_\text{r} is duration of the recoil force Assuming the forces are somewhat evenly spread out over their respective durations, the condition for free-recoil is t_\text{r} \ll t_\text{cr} , while for zero-recoil, \tau = I \frac{d^2\theta}{dt^2} = h F(t) where h is the perpendicular distance of the center of mass of the gun below the barrel axis, F(t) is the force on the gun due to the expanding gases, equal and opposite to the force on the bullet, I is the moment of inertia of the gun about its center of mass, or its pivot point, and \theta is the angle of rotation of the barrel axis "up" from its orientation at ignition (aim angle).
The angular momentum of the gun is found by integrating this equation to obtain: I \frac{d\theta}{dt} = h\int_0^t F(t)\,dt = h m_\text{g} V_\text{g}(t) = h m_\text{b} V_\text{b}(t) where the equality of the momenta of the gun and bullet have been used.
The angular rotation of the gun as the bullet exits the barrel is then found by integrating again: I \theta_f = h\int_0^{t_f} m_\text{b} V_\text{b} \, dt = 2 h m_\text{b} L where \theta_f is the angle above the aim angle at which the bullet leaves the barrel, t_f is the time of travel of the bullet in the barrel (because of the acceleration a = 2x/t^2 the time is longer than L/V_\text{b} : t_f = 2 L / V_\text{b} ) and is the distance the bullet travels from its rest position to the tip of the barrel.
The angle at which the bullet leaves the barrel above the aim angle is then given by: \theta_f=\frac{2 h m_\text{b} L}{I} p_e = m_p V_0 + m_\text{g} \alpha V_0\, where m_\text{g}\, is the mass of the propellant charge, equal to the mass of the ejected gas. This expression should be substituted into the expression for projectile momentum in order to obtain a more accurate description of the recoil process.
The effective velocity may be used in the energy equation as well, but since the value of α used is generally specified for the momentum equation, the energy values obtained may be less accurate. The value of the constant α is generally taken to lie between 1.25 and 1.75. It is mostly dependent upon the type of propellant used, but may depend slightly on other things such as the ratio of the length of the barrel to its radius. Muzzle devices can reduce the recoil impulse by altering the pattern of gas expansion.
For instance, muzzle brakes primarily works by diverting some of the gas ejecta towards the sides, increasing the lateral blast intensity (hence louder to the sides) but reducing the thrust from the forward-projection (thus less recoil). Similarly, recoil compensators divert the gas ejecta mostly upwards to counteract the muzzle rise. However, suppressors work on a different principle, not by vectoring the gas expansion laterally but instead by modulating the forward speed of the gas expansion.
By using internal baffles, the gas is made to travel through a convoluted path before eventually released outside at the front of the suppressor, thus dissipating its energy over a larger area and a longer time. This reduces both the intensity of the blast (thus lower loudness) and the recoil generated (as for the same impulse, force is inversely proportional to time).
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1366933542 under CC BY-SA 4.0; modifications have been made.