Record changer
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A record changer or autochanger is a device that plays several phonograph records in sequence without user intervention. Record changers first appeared in the late 1920s, and were common until the 1980s.
A record changer or autochanger is a device that plays several phonograph records in sequence without user intervention. Record changers first appeared in the late 1920s, and were common until the 1980s.
Operation
Record-changer mechanisms were sometimes complicated. They typically held a stack of records on an extended central spindle supported by an arm (separate from the tonearm housing the cartridge and stylus which played the records). Some units had feelers that could detect the size of each record (the three standard sizes being 7, 10 or 12 inches) and accordingly position the tone arm at the start of the disc (its outer edge). Some used a variable-size sensor which allowed sizes other than the standard three to be played. The simpler models required the record diameter to be set manually, and hence did not allow records of different sizes to be stacked together. The following automatic size detecting devices were the most popular (with examples): Three-size sensors: Size-selector knob no size intermix (BSR, 1968 to 1980s). Size- and speed-selector knob no size intermix, so that some types couldn't be played automatically (Garrard after 1969). Rising feelers in or alongside turntable no size intermix, but automatic sensing of size (PE after 1970) Falling record sensor random intermix sizes mixed in any order (BSR before 1968. Garrard Auto-Slim variants. Some RCA. Silvertone.). Rising and falling record sensors intermix 10- and 12-inch records vs. separate playing of 7-inch (VM 1950 to 1970. Admiral Ensign series.). Unplayed stack sensor arranged intermix, large records before small (Webster Chicago 1950 to 1953) Unplayed stack arm tip sensor arranged intermix (Collaro/Magnavox after 1967) Variable-size sensors: Pickup arm scan of unplayed stack arranged intermix, odd sizes (Collaro/Magnavox 1954 to 1967) Pickup arm scan of lowered record random intermix, odd sizes (PE 1957 to 1969) Arm tip feeler wheels (feel only top record on turntable) random intermix, odd sizes (Dual 1003, 1004, 1005, 1006) Arm top feeler wheels (feel only bottom record on stack) random intermix, odd sizes (Miracord 9 and 90) Pickup arm scan of separated record random intermix, odd sizes (Thorens TD-224) Audiophiles eventually disdained record changers because of the perceived compromise in fidelity resulting from changes in tone arm angle with the height of the stack, and concerns about changers' seemingly rough treatment of discs, particularly due to slight but cumulative damage to the spindle holes as the records were dropped from a height of a few inches onto the record or stack below or the turntable platter; as well as some sliding and rubbing of the discs together, scratching the record labels in the process, because the dropped disc didn't immediately accelerate to the rotational speed of the spindle or discs below it. Most of these fears were unfounded in changers made after 1953. More advanced changers, such as the TD-224 model from Thorens and the ADC Accutrac+6, partially addressed these problems.
Automatic sequencing
Numbering of the sides of the discs in many double and triple albums, and boxed sets of records (both 78s and LPs) in a certain sequence enabled them to be stacked and played on record changers. After the discs were stacked and one side of each disc had played, the entire stack would be turned over and replaced on the changer shelf. Thus, to be heard in the proper sequence, each disc of a four-disc set would contain, respectively, "sides" 1&8, 2&7, 3&6 and 4&5 a practice known as "automatic sequencing", "changer sequencing" or "auto-coupling". In pre-LP days, classical symphonies and concertos, and later, original cast albums, would be recorded using this format. This "drop-automatic sequence" was designed for record changers which simply dropped records rather than reversing the stack as it was played in sequence. Other record changers, including some made as far back as the 1930s by RCA and GE in addition to the much later Thorens TD-224, were capable of reversing the stack automatically. The RCA and GE units kept the records stacked on the turntable and slid the top record to the side after playing it. A separate sequence, the "slide-automatic sequence," was made for these changers, with sides coupled 1&5, 2&6, 3&7 and 4&8. Some record changers could play both sides of each record. Manual sequence (sides coupled 1&2, 3&4, 5&6 and 7&8) worked with these. Examples were the Markel 75, Capehart turnover, Fisher/Lincoln, Garrard RC-100, and Thorens Symphony CD50/CD53 changers. During the late 1930s and early 1940s, Victor released 78 rpm record sets in all three sequences (with set numbers preceded by M for manual, DM for drop-automatic or AM for slide-automatic sequencing), for players of each of the three kinds it manufactured. Columbia used MM for drop-automatic sets of three or more records, X for manual and MX for two-record drop-automatic sets. Some radio station copies were produced in "relay sequence" to be played by a DJ on two turntables with no break between sides, which were coupled as 1&3, 2&4, 5&7 and 6&8. The slide-automatic sequence also allowed uninterrupted play with two turntables.
See also
CD changer
References
Further reading
External links
Stack-O-Matic Turntables, a retro-style record player with the changer feature manufactured by Crosley Radio Corporation , an article about a predecessor of the record changer V-M Audio Enthusiasts – a 1999 company that took over after Voice of Music was liquidated
Text derived from https://en.wikipedia.org/w/index.php?oldid=1359130042 under CC BY-SA 4.0; modifications have been made.