Lesson plan

Rectangulus

, inventor of the rectangulus The rectangulus is an astronomical instrument, invented by Richard of Wallingford around 1326. Dissatisfied with the limitations of existing astrolabes, Richard developed the rectangulus as an instrument for spherical trigonometry and to measure the angles between planets and other astronomical bodies. This was one of a number of instruments he created, including the Albion, a form of equatorium, and a famously complicated and expensive horologium (astronomical clock). His Tractus Rectanguli, describing the rectangulus, was an influential text in medieval astronomy and at least thirty copies were known to survive. His Quadripartitum was the first text on spherical trigonometry to be published in Western Europe. The rectangulus was a form of skeleton torquetum. This was a series of nested angular scales, so that measurements in azimuth and elevation could be made directly in polar coordinates, relative to the ecliptic. Conversion from these coordinates though was difficult, involving what was the leading mathematics of the day. The rectangulus was an analogue computing device to simplify this: instead of measuring in angular measurements it could resolve the angles to Cartesian components directly. This then simplified the further calculations. The rectangulus was constructed as a brass pillar with a number of linear scales hinged above it.…

Back to article

Article summary

, inventor of the rectangulus The rectangulus is an astronomical instrument, invented by Richard of Wallingford around 1326. Dissatisfied with the limitations of existing astrolabes, Richard developed the rectangulus as an instrument for spherical trigonometry and to measure the angles between planets and other astronomical bodies. This was one of a number of instruments he created, including the Albion, a form of equatorium, and a famously complicated and expensive horologium (astronomical clock). His Tractus Rectanguli, describing the rectangulus, was an influential text in medieval astronomy and at least thirty copies were known to survive. His Quadripartitum was the first text on spherical trigonometry to be published in Western Europe. The rectangulus was a form of skeleton torquetum. This was a series of nested angular scales, so that measurements in azimuth and elevation could be made directly in polar coordinates, relative to the ecliptic. Conversion from these coordinates though was difficult, involving what was the leading mathematics of the day. The rectangulus was an analogue computing device to simplify this: instead of measuring in angular measurements it could resolve the angles to Cartesian components directly. This then simplified the further calculations. The rectangulus was constructed as a brass pillar with a number of linear scales hinged above it.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.