Red team
≈ 15 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A red team is a group that attempts a physical or digital intrusion against an organization. Red Team may also refer to: * Federal Aviation Administration Red team. Set up by the United States Congress to help the FAA think like terrorists, the elite squad tested airport security systems. * Red Team (film), a 1999 Canadian film also known as The Crimson Code * Red Team, one of two opposing teams in the machinima Red vs. Blue
A red team is a group that simulates an adversary, attempts a physical or digital intrusion against an organization at the direction of that organization, then reports back so that the organization can improve their defenses. Red teams work for the organization or are hired by the organization. Their work is legal, but it can surprise some employees who may not know that red teaming is occurring, or who may be deceived by the red team. Some definitions of red team are broader, and they include any group within an organization that is directed to think outside the box and look at alternative scenarios that are considered less plausible. This directive can be an important defense against false assumptions and groupthink. The term red teaming originated in the 1960s in the United States. Technical red teaming focuses on compromising networks and computers digitally. There may also be a blue team, a term for cybersecurity employees who are responsible for defending an organization's networks and computers against attack. In technical red teaming, attack vectors are used to gain access, and then reconnaissance is performed to discover more devices to potentially compromise. Credential hunting involves scouring a computer for credentials such as passwords and session cookies, and once these are found, can be used to compromise additional computers. During intrusions from third parties, a red team may team up with the blue team to assist in defending the organization. Rules of engagement and standard operating procedures are often utilized to ensure that the red team does not cause damage during their exercises. Physical red teaming focuses on sending a team to gain entry to restricted areas. This is done to test and optimize physical security such as fences, cameras, alarms, locks, and employee behavior. As with technical red teaming, rules of engagement are used to ensure that red teams do not cause excessive damage during their exercises. Physical red teaming will often involve a reconnaissance phase where information is gathered and weaknesses in security are identified, and then that information will be used to conduct an operation (typically at night) to gain physical entry to the premises. Security devices will be identified and defeated using tools and techniques. Physical red teamers will be given specific objectives such as gaining access to a server room and taking a portable hard drive, or gaining access to an executive's office and taking confidential documents. Red teams are used in several fields, including cybersecurity, airport security, law enforcement, the military, and intelligence agencies. In the United States government, red teams are used by the Army, Marine Corps, Department of Defense, Federal Aviation Administration, and Transportation Security Administration. . For red teams, this software can be used to create a map of an infiltrated network. Nodes (the circles) are commonly computers, users, or permission groups.|alt=Diagram of a graph database. Contains three circles with text inside them and lines with arrows between them.]] Once access to a network is achieved, reconnaissance can be conducted. The data gathered can be placed in a graph database, which is software that visually plots nodes, relationships, and properties. Typical nodes might be computers, users, or permission groups. Red teams will usually have very good graph databases of their own organization, because they can utilize home-field advantage, including working with the blue team to create a thorough map of the network, and a thorough list of users and administrators. A query language such as Cypher can be used to create and modify graph databases. Any type of administrator account is valuable to place in the graph database, including administrators of third-party tools such as Amazon Web Services (AWS). Data can sometimes be exported from tools and then inserted into the graph database. Once the red team has compromised a computer, website, or system, a powerful technique is credential hunting. These can be in the form of clear text passwords, ciphertext, hashes, or access tokens. The red team gets access to a computer, looks for credentials that can be used to access a different computer, then this is repeated, with the goal of accessing many computers. Credentials can be stolen from many locations, including files, source code repositories such as Git, computer memory, and tracing and logging software. Techniques such as pass the cookie and pass the hash can be used to get access to websites and machines without entering a password. Techniques such as optical character recognition (OCR), exploiting default passwords, spoofing a credential prompt, and phishing can also be used. The red team can utilize computer programming and command-line interface (CLI) scripts to automate some of their tasks. For example, CLI scripts can utilize the Component Object Model (COM) on Microsoft Windows machines in order to automate tasks in Microsoft Office applications. Useful tasks might include sending emails, searching documents, encrypting, or retrieving data. Red teams can take control of a browser using Internet Explorer's COM, Google Chrome's remote debugging feature, or the testing framework Selenium. (pictured) can be used to limit access to a private network from the wider Internet. A software firewall, such as a firewall built into a computer's operating system, can be used to limit remote access to that computer.|alt=Diagram of a network firewall. Contains computers on the left and right side, a wall icon in the middle, lines connecting the computers that symbolize network connections, and all the lines on each side merge before going through the firewall.]] An organization's red team may be an attractive target for real attackers. Red team member's machines may contain sensitive information about the organization. In response, red team member's machines are often secured. Techniques for securing machines include configuring the operating system's firewall, restricting Secure Shell (SSH) and Bluetooth access, improving logging and alerts, securely deleting files, and encrypting hard drives. One tactic is to engage in "active defense", which involves setting up decoys and honeypots to help track the location of intruders. These honeypots can help alert the blue team to a network intrusion that might otherwise have gone undetected. Various software can be used to set up a honeypot file depending on the operating system: macOS tools include OpenBMS, Linux tools include auditd plugins, and Windows tools include System Access Control Lists (SACL). Notifications can include popups, emails, and writing to a log file. Centralized monitoring, where important log files are quickly sent to logging software on a different machine, is a useful network defense technique. (SOC) at the University of Maryland|alt=Photo of a security operations center. Contains 5 computers on tables, 10 televisions on the wall, and 2 cybersecurity personnel.]] Tracking certain metrics or key performance indicators (KPIs) can help to make sure a red team is achieving the desired output. Examples of red team KPIs include performing a certain number of penetration tests per year, or by growing the team by a certain number of pen testers within a certain time period. It can also be useful to track the number of compromised machines, compromisable machines, and other metrics related to infiltration. These statistics can be graphed by day and placed on a dashboard displayed in the security operations center (SOC) to provide motivation to the blue team to detect and close breaches. In order to identify worst offenders, compromises can be graphed and grouped by where in the software they were discovered, company office location, job title, or department. Monte Carlo simulations can be used to identify which intrusion scenarios are most likely, most damaging, or both. A Test Maturity Model, a type of Capability Maturity Model, can be used to assess how mature a red team is, and what the next step is to grow. The MITRE ATT&CK Navigator, a list of tactics, techniques, and procedures (TTPs) including advanced persistent threats (APTs), can be consulted to see how many TTPs a red team is exploiting, and give additional ideas for TTPs to utilize in the future. s and earpieces are sometimes used by physical red teams conducting operations at night. Something less conspicuous such as Bluetooth earbuds may be preferred during the day.|alt=Photo of a black handheld radio. Is black with a long black antenna.]] Part of physical red teaming is performing reconnaissance. The type of reconnaissance gathered usually includes information about people, places, security devices, and weather. Reconnaissance has a military origin, and military reconnaissance techniques are applicable to physical red teaming. Red team reconnaissance equipment might include military clothing since it does not rip easily, red lights to preserve night vision and be less detectable, radios and earpieces, camera and tripod, binoculars, night vision equipment, and an all-weather notebook. Some methods of field communication include a Bluetooth earpiece dialed into a cell phone conference call during the day, and two-way radios with earpieces at night. In case of compromise, red team members often carry identification and an authorization letter with multiple after-hours contacts who can vouch for the legality and legitimacy of the red team's activities. Before physical reconnaissance occurs, open-source intelligence (OSINT) gathering can occur by researching locations and staff members via the Internet, including the company's website, social media accounts, search engines, mapping websites, and job postings (which give hints about the technology and software the company uses). It is a good practice to do multiple days of reconnaissance, to reconnoiter both during the day and at night, to bring at least three operators, to utilize a nearby staging area that is out of sight of the target, and to do reconnaissance and infiltration as two separate trips rather than combining them. Recon teams can use techniques to conceal themselves and equipment. For example, a passenger van can be rented and the windows can be blacked out to conceal photography and videography of the target. Examining and videoing the locks of a building during a walk-around can be concealed by the recon pretending to be on the phone. In the event of compromise, such as employees becoming suspicious, a story can be rehearsed ahead of time until it can be recited confidently. If the team has split up, the compromise of one operator can result in the team leader pulling the other operators out. Concealed video cameras can be used to capture footage for later review, and debriefs can be done quickly after leaving the area so that fresh information is quickly documented. is regarded by some physical red teams as an inferior method of bypassing locks, due to the noise and time it takes compared to using lower skill attacks such as shims.|alt=Diagram of how lock picking works. Contains a lock pick inserted into a cutaway view of a lock. The lock contains 4 small, spring-pushed cylinders on the top. The pick manipulates the cylinders. A tension wrench is also inserted into the lock.]] Common security devices include doors, locks, fences, alarms, motion sensors, and ground sensors. Doors and locks are often faster and quieter to bypass with tools and shims, rather than lock picking. RFID locks are common at businesses, and covert RFID readers combined with social engineering during reconnaissance can be used to duplicate an authorized employee's badge. Barbed wire on fences can be bypassed by placing a thick blanket over it. Anti-climb fences can be bypassed with ladders. Alarms can sometimes be neutralized with a radio jammer that targets the frequencies that alarms use for their internal and external communications. Motion sensors can be defeated with a special body-sized shield that blocks a person's heat signature. Ground sensors are prone to false positives, which can lead security personnel to not trust them or ignore them. can be an alluring target for red teams. Physical access to a server can help gain entry into secured networks that are otherwise well-protected from digital threats.|alt=Photo of computer servers. There are 3 racks containing about 10 blade servers each.]] Red teams usually have goal locations selected and tasks pre-planned for each team or team member, such as entering a server room or an executive's office. However, it can be difficult to figure out a room's location in advance, so this is often figured out on the fly. Reading emergency exit route signs and the use of a watch with a compass can assist with navigating inside of buildings. Commercial buildings will often have some lights left on. It is good practice to not turn lights on or off, as this may alert someone. Instead, utilizing already unlit areas is preferred for red team operations, with rushing and freezing techniques to be used to quickly move through illuminated areas. Standing full-height in front of windows and entering buildings via lobbies is often avoided due to the risks of being seen. A borescope can be used to peer around corners and under doors, to help spot people, cameras, or motion detectors. Once the target room has been reached, if something needs to be found such as a specific document or specific equipment, the room can be divided into sections, with each red team member focusing on a section. Passwords are often located under keyboards. Techniques can be used to avoid disturbing the placement of objects in offices such as keyboards and chairs, as adjusting these will often be noticed. Lights and locks can be left in their original state of on or off, locked or unlocked. Steps can be taken to ensure that equipment is not left behind, such as having a list of all equipment brought in and checking that all items are accounted for. It is good practice to radio situation reports (SITREPs) to the team leader when unusual things happen. The team leader can then decide if the operation should continue, should be aborted, or if a team member should surrender by showing their authorization letter and ID. When confronted by civilians such as employees, red team operators can attempt social engineering. When confronted by law enforcement, it is good practice to immediately surrender due to the potential legal and safety consequences. 's compound in Pakistan. Three red teams were used to review the intelligence that led to the killing of Osama bin Laden in 2011.|alt=Diagram of terrorist Osama Bin Laden's compound. Contains one large three-story building and several smaller outbuildings. There are large yards on the right and left. Everything is surrounded by a high concrete wall. There are internal walls separating some courtyards for defensive purposes.]] When applied to intelligence work, red teaming is sometimes called alternative analysis. Alternative analysis involves bringing in fresh analysts to double-check the conclusions of another team, to challenge assumptions and make sure nothing was overlooked. Three red teams were used to review the intelligence that led to the killing of Osama bin Laden in 2011, including red teams from outside the Central Intelligence Agency, because there were major diplomatic and public relations consequences for launching a military operation into Pakistan, so it was important to double-check the original team's intelligence and conclusions. After failures to anticipate the Yom Kippur War, the Israeli Defense Forces' Intelligence Directorate formed a red team called Ipcha Mistabra ("on the contrary") to re-examine discarded assumptions and avoid complacency. The North Atlantic Treaty Organization (NATO) utilizes alternative analysis. .|alt=Photo of airport bag screening equipment. Two monitors are shown, and the images on the screens are color x-rays of carry-on baggage.]] The United States Federal Aviation Administration (FAA) has been implementing red teams since Pan Am Flight 103 over Lockerbie, Scotland, which suffered a terrorist attack in 1988. Red teams conduct tests at about 100 US airports annually. Tests were on hiatus after the September 11 attacks in 2001, and resumed in 2003 under the Transportation Security Administration, who assumed the FAA's aviation security role after 9/11. Before the September 11 attacks, FAA use of red teaming revealed severe weaknesses in security at Logan International Airport in Boston, where two of the four hijacked 9/11 flights originated. Some former FAA investigators who participated on these teams feel that the FAA deliberately ignored the results of the tests, and that this resulted in part in the 9/11 terrorist attack on the US. The United States Transportation Security Administration has used red teaming in the past. In one red team operation, undercover agents were able to fool Transportation Security Officers and bring weapons and fake explosives through security 67 out of 70 times in 2015.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1228669339 under CC BY-SA 4.0; modifications have been made.