Lesson plan
Redcare
BT Redcare was the largest supplier of alarm signalling services for security and fire in the UK. It was established over thirty years ago, and works with both the business and domestic markets. Redcare was a widely deployed service from BT, used in the UK. Redcare signalling was fitted by alarm installation companies (“installers”), then provides a signal from a customer’s premises to an alarm receiving centre (ARC). ARCs would monitor the signal 24 hours a day and, when necessary, alert the customer, nominated persons, police and fire services. The BT Redcare Network has 99.997% reliability and was a dedicated network developed for security alarm and fire alarm signalling. It was supported by BT technology. The system transmitted a continuous signal on a standard telephone line, which could also be used for voice and broadband services, to prevent alarm systems being defeated by the line being cut. Redcare Classic worked below the voice frequency spectrum on a phone line in order to avoid interference with calls or broadband, which uses frequencies above the voice spectrum. Other versions also used GSM (mobile) as a backup to the main phone line or functioned using either wireless (2G/3G mobile data) or IP as the primary connection all backed up by an alternative signalling path. These 2G/3G and IP offerings were marketed by Redcare under their Secure product range.…
Article summary
BT Redcare was the largest supplier of alarm signalling services for security and fire in the UK. It was established over thirty years ago, and works with both the business and domestic markets. Redcare was a widely deployed service from BT, used in the UK. Redcare signalling was fitted by alarm installation companies (“installers”), then provides a signal from a customer’s premises to an alarm receiving centre (ARC). ARCs would monitor the signal 24 hours a day and, when necessary, alert the customer, nominated persons, police and fire services. The BT Redcare Network has 99.997% reliability and was a dedicated network developed for security alarm and fire alarm signalling. It was supported by BT technology. The system transmitted a continuous signal on a standard telephone line, which could also be used for voice and broadband services, to prevent alarm systems being defeated by the line being cut. Redcare Classic worked below the voice frequency spectrum on a phone line in order to avoid interference with calls or broadband, which uses frequencies above the voice spectrum. Other versions also used GSM (mobile) as a backup to the main phone line or functioned using either wireless (2G/3G mobile data) or IP as the primary connection all backed up by an alternative signalling path. These 2G/3G and IP offerings were marketed by Redcare under their Secure product range.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.