Lesson plan
Redscale
Redscale is a technique of shooting photographic film where the film is exposed from the wrong side, i.e. the emulsion is exposed through the base of the film. Normally, this is done by winding the film upside-down into an empty film canister. The name "redscale" comes because there is a strong color shift to red due to the red-sensitive layer of the film being exposed first, rather than last (the red layer is normally the bottom layer in C-41 color print film). All layers are sensitive to blue light, so normally the blue layer is on top, followed by a filter. In this technique, blue light exposes the layers containing cyan and magenta dyes, but the layer containing yellow dye is left unexposed due to the filter. E-6 (color slide) film has also been used for this technique. Depending on the type of film used, the resulting colors range from maroon, to red, to orange, to yellow. The amount of over exposure determines the intensity of the red. When redscale film is shot at the posted ASA the resulting photos are almost all red, over exposure allows light to reach the less sensitive green and blue layers of the film. Exposures of 5 stops or more over posted speed can result in the red layer washing out completely and the resulting images appearing mostly yellow.
Article summary
Redscale is a technique of shooting photographic film where the film is exposed from the wrong side, i.e. the emulsion is exposed through the base of the film. Normally, this is done by winding the film upside-down into an empty film canister. The name "redscale" comes because there is a strong color shift to red due to the red-sensitive layer of the film being exposed first, rather than last (the red layer is normally the bottom layer in C-41 color print film). All layers are sensitive to blue light, so normally the blue layer is on top, followed by a filter. In this technique, blue light exposes the layers containing cyan and magenta dyes, but the layer containing yellow dye is left unexposed due to the filter. E-6 (color slide) film has also been used for this technique. Depending on the type of film used, the resulting colors range from maroon, to red, to orange, to yellow. The amount of over exposure determines the intensity of the red. When redscale film is shot at the posted ASA the resulting photos are almost all red, over exposure allows light to reach the less sensitive green and blue layers of the film. Exposures of 5 stops or more over posted speed can result in the red layer washing out completely and the resulting images appearing mostly yellow.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.