Reed Phase

Uses your system voice; voice and rate in settings.

Q3423015Snapshot

≈ 5 min read

Names in other languages

  • EnglishReed Phase
  • FrançaisReed Phase
  • NederlandsReed Phase
  • 日本語リード・フェイズ

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

in 1976 Reed Phase, also called Three Reeds, is an early work by the American minimalist composer Steve Reich. It was written originally in 1966 for soprano saxophone and two soprano saxophones recorded on magnetic tape, titled at that time Saxophone Phase, and was later published in two versions: one for any reed instrument and tape (titled Reed Phase), the other for three reed instruments of exactly the same kind (in which case the title is Three Reeds). It was Reich's first attempt at applying his "phasing" technique, which he had previously used in the tape pieces It's Gonna Rain (1965) and Come Out (1966), to live performance.

in 1976 Reed Phase, also called Three Reeds, is an early work by the American minimalist composer Steve Reich. It was written originally in 1966 for soprano saxophone and two soprano saxophones recorded on magnetic tape, titled at that time Saxophone Phase, and was later published in two versions: one for any reed instrument and tape (titled Reed Phase), the other for three reed instruments of exactly the same kind (in which case the title is Three Reeds). It was Reich's first attempt at applying his "phasing" technique, which he had previously used in the tape pieces It's Gonna Rain (1965) and Come Out (1966), to live performance. { \override Score.TimeSignature #'stencil = ##f \relative c { \set Staff.midiInstrument = #"clarinet" \set Score.tempoHideNote = ##t \tempo 8 = 280 \clef treble \time 5/8 d8[ a' g c a] } } The basic unit is continually repeated by the instrumentalist and, because the performer must play without any interruption for at least five minutes, Reed Phase requires the use of circular breathing, instructions for which are given in the score. It is probably the first composition to require the use of circular breathing throughout the entire duration of the piece. Although the basic unit consists of five notes, the note A is used twice, so that there are only four pitches in all. The scale of the piece is therefore tetratonal, centered on the low D. The work is composed in three sections. The first section is a cycle of phase shifts of the basic unit between the live instrument and one instrument on the tape. The reed instrument recorded on the tape repeats the basic unit in a fixed tempo, while the instrumentalist begins a cycle of phase shifts consisting of the soloist repeating the basic module a certain number of times, then accelerating the tempo until the shift against the steady part (tape or accompanying reed instrument) is increased by one eighth note, and then resuming the initial tempo for a certain number of repetitions in a constant relationship with the tape. The instrumentalist then accelerates again until the time lag is increased to a quarter note. This process is repeated until the starting point is reached once again, which is to say it returns to a unison (in phase) with the tape, which marks the end of the first cycle of phasing. In the score, the gradual transitions are notated with dotted lines to indicate the acceleration made by the player against the fixed part(s), each synchronized stage in the sequence notated conventionally to show the new alignment. The performer is to resist the tendency to move directly from one eighth-note synchronization to the next. Instead, "he should attempt to move smoothly and continuously—the slower the better—spending due time within the 'irrational' relationships". Nevertheless, there is an alternation between periods of gradual dephasing and sections of temporary rhythmic stability. It is with this "stepped" characteristic that Reich's "live" process compositions most conspicuously differ from the "pure phasing" of the tape compositions, which have a slow and regular rate of change. In the second section, a second instrument is added to the tape in a second channel, offset by one eighth note from the first recorded instrument. The live instrumentalist then performs a second cycle of phase shifts, reaching unison with channel 1 of the tape, and then moving ahead by one more eighth note to achieve unison with channel 2. At this point, the second channel fades out and the soloist continues the third section as a repeat of the first, until coming back into phase with the tape once again. After a few unison repetitions, both the performer and the tape stop simultaneously.

Further reading

Reich, Steve. 1974. Writings about Music, edited by Kaspar Koenig. Halifax, Nova Scotia: Nova Scotia College of Art and Design; New York: New York University Press; London: Universal Edition. Strickland, Edward. 2001. "Gibson, Jon (Charles)". The New Grove Dictionary of Music and Musicians, second edition, edited by Stanley Sadie and John Tyrrell. London: Macmillan.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1357680293 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.