Lesson plan
Reference Broadcast Synchronization
Reference Broadcast Synchronization (RBS) is a synchronization method in which the receiver uses the physical layer broadcasts for comparing the clocks. This slightly differs from traditional methods which synchronize the sender's with the receiver's clock. RBS allows nodes to synchronize their clocks to the resolution necessary for example for wireless sensor network applications. Rather than broadcasting a timestamp in a synchronization packet as in protocols such as Network Time Protocol, RBS allows the nodes receiving the synchronization packets to use the packet's arrival time as a reference point for clock synchronization. Because most of the non-deterministic propagation time involved in transmitting a packet over a wireless channel lies between the construction of the packet and the sender's transmitter (e.g., sender's queue delay, MAC contention delay, etc.), by timestamping only at the receiver, RBS removes most delay uncertainty involved in typical time synchronization protocols. For single-hop networks, the RBS algorithm is very simple. First, a transmitter broadcasts some number M as reference broadcasts. Each receiver that receives these broadcasts exchanges the time that each reference broadcast was received locally with its neighbors.…
Article summary
Reference Broadcast Synchronization (RBS) is a synchronization method in which the receiver uses the physical layer broadcasts for comparing the clocks. This slightly differs from traditional methods which synchronize the sender's with the receiver's clock. RBS allows nodes to synchronize their clocks to the resolution necessary for example for wireless sensor network applications. Rather than broadcasting a timestamp in a synchronization packet as in protocols such as Network Time Protocol, RBS allows the nodes receiving the synchronization packets to use the packet's arrival time as a reference point for clock synchronization. Because most of the non-deterministic propagation time involved in transmitting a packet over a wireless channel lies between the construction of the packet and the sender's transmitter (e.g., sender's queue delay, MAC contention delay, etc.), by timestamping only at the receiver, RBS removes most delay uncertainty involved in typical time synchronization protocols. For single-hop networks, the RBS algorithm is very simple. First, a transmitter broadcasts some number M as reference broadcasts. Each receiver that receives these broadcasts exchanges the time that each reference broadcast was received locally with its neighbors.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.