Reference designator
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
schematic showing reference designators: C1, C2, D1, D2, R1, R2, Q1, Q2, U1, U2, BAT1, XFMR1 (not preferred designator). A reference designator (RefDes) unambiguously identifies the location of a component within an electrical schematic or on a printed circuit board. The reference designator usually consists of one or two letters followed by a number, e.g. C3, D1, R4, U15. The number is sometimes followed by a letter, indicating that components are grouped or matched with each other, e.g. R17A, R17B. The IEEE 315 standard contains a list of Class Designation Letters to use for electrical and electronic assemblies. For example, the letter R is a reference prefix for the resistors of an assembly, C for capacitors, K for relays. Industrial electrical installations often use reference designators according to IEC 81346 and NFPA 79 Annex E: Device and Component Designations.
schematic showing reference designators: C1, C2, D1, D2, R1, R2, Q1, Q2, U1, U2, BAT1, XFMR1 (not preferred designator).]] A reference designator (RefDes) unambiguously identifies the location of a component within an electrical schematic or on a printed circuit board. The reference designator usually consists of one or two letters followed by a number, e.g. C3, D1, R4, U15. The number is sometimes followed by a letter, indicating that components are grouped or matched with each other, e.g. R17A, R17B. The IEEE 315 standard contains a list of Class Designation Letters to use for electrical and electronic assemblies. For example, the letter R is a reference prefix for the resistors of an assembly, C for capacitors, K for relays. Industrial electrical installations often use reference designators according to IEC 81346 and NFPA 79 Annex E: Device and Component Designations.
Designators
The table below lists designators commonly used, and does not necessarily comply with standards. For modern use, designators are often simplified towards shorter designators, because it requires less space on silkscreens.
Other designators
See also
Circuit diagram Electronic symbol IC power-supply pin
References
Further reading
Standards AS 1103.2-1982 - "Diagrams charts and tables for electrotechnology, Part 2: Item Designation" (Superseded by AS 3702-1989.) AS 3702-1989 - "Item designation in electrotechnology". (Equivalent to IEC 60750 Edition 1.0, 1983.) IEC 113 (Superseded by IEC 750, i.e. IEC 60750.) IEC 750-1983 (AS 3702 is equivalent, but provides extra information.) IEEE 315-1975 / ANSI Standard Y32.2. Annex F: "Cross reference list of Class Designation Letters" compares IEC 113-2:1971 to the IEEE/ANSI standard. * AS 1102 and IEC 60617 for "Graphical Symbols for Electrotechnology".
External links
Text derived from https://en.wikipedia.org/w/index.php?oldid=1367154339 under CC BY-SA 4.0; modifications have been made.