Lesson plan
Refining (glass)
Refining is the removal of bubbles from the molten glass. Alternatively, the term "Fining" is used; in this case, "refining" refers to the chemical processes only. Refining is supported by high temperature and stirring, as well as chemical reactions caused by refining agents. Refining agents increase the volume of bubbles and “seeds” (small bubbles), facilitating their ascension. For the most common types of glass production sulfate raw materials are used, in particular, Na SO , decomposing into SO and O . Glass types that melt at comparatively high temperatures, such as borosilicate glasses, use chlorides, such as NaCl, having a sufficiently high vapour pressure at refining temperatures. Alkali-free glasses with high melting temperature, such as LCD glasses, use tin oxide, SnO . In the following cooling process, gases from bubbles are reabsorbed in the melt. Redox agents such as Sb O may release or absorb oxygen depending on temperature and composition. Apart from chemical refining, bubbling, i.e. direct blowing of gas into the melt is used. Less common are methods like ultrasonic refining or low-pressure refining.
Article summary
Refining is the removal of bubbles from the molten glass. Alternatively, the term "Fining" is used; in this case, "refining" refers to the chemical processes only. Refining is supported by high temperature and stirring, as well as chemical reactions caused by refining agents. Refining agents increase the volume of bubbles and “seeds” (small bubbles), facilitating their ascension. For the most common types of glass production sulfate raw materials are used, in particular, Na SO , decomposing into SO and O . Glass types that melt at comparatively high temperatures, such as borosilicate glasses, use chlorides, such as NaCl, having a sufficiently high vapour pressure at refining temperatures. Alkali-free glasses with high melting temperature, such as LCD glasses, use tin oxide, SnO . In the following cooling process, gases from bubbles are reabsorbed in the melt. Redox agents such as Sb O may release or absorb oxygen depending on temperature and composition. Apart from chemical refining, bubbling, i.e. direct blowing of gas into the melt is used. Less common are methods like ultrasonic refining or low-pressure refining.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.